similar to: Isa Soundcard under CentOS 5

Moin, I am using a kind of VoIP Software (Echolink) that run perfekt with the build in soundcard. But I want to use my headset, that appears as soundcard 1 (hw:1.0). I can choose the soundcard in Echolink (default, external and system default), but this goes to the build in card independent from this setting. Can I configure wine to use the 2nd card? Or can I configure wine to use the 2nd

Hi there, I'm trying to repurpose an unused machine (athlon XP 3000+) for my young daughter to use. It's on a motherboard with a VIA KT880 chipset and VIA integrated soundcard (VIA 8237). The card seems to be detected during boot time and shows up in the system log, but when I try to actually use the sound card within Gnome, there's no sound. The device is detected, but

This afternoon, I bought a pair of ear plugs (the large flat kind that hook onto my ears). Plugged them in to test and they work perfectly. I'm listening to streamaudio.com as I type this. However, when I tried to watch a youtube.com video (my wife exercise dancing) just silence. She had the same video on to test and the sound was fine on her box. Then, I tried system-config-soundcard and

Scott Manley wrote: > Ross Levis wrote: > > We want crossfading so we need to use the SQRSoft > > crossfading Winamp output plugin. > > In that case you may be in trouble. > One more reason why computers will never replace real DJ's ;-) Not too much trouble I think. The output of all the Winamp's can be sent to the same soundcard. We will just keep the sound

Greetings- I've got a curious project that I could use some input on. I'd like to use Asterisk to record some audio channels via USB 'soundcard'. When audio passes through the soundcard, Asterisk should grab that audio channel (CONSOLE?), and write it to a wav file. I'm perfectly competent with the dialplan portion of the recording, but I don't know about the following:

Hi folks, before I flood the bug tracking system, I just want to send you a list of problems I encountered when using xen under Debian Etch (i386 on Intel Core2 Duo E6750). Shall I open a seperate bug report for each of the items below or are some of them features that are known to be missing in the xen release? - A HVM domain does not start when using a physical disk without specifing the

Hi, I have an M-Audio soundcard. All of the software on the driver CD has .exe file extensions and I can't get any of it to load in Debian Lenny. Will WINE allow me to install my soundcard driver software? Cheers, JOn.

With wine 0.9.49 and the versions before (.deb files for Kubuntu Dapper) I have to occupy my soundcard to have sound in Rayman3. After the intro the sound is reinitialized again for the main game and the device mustn't be released before it. My soundcard is a C-Media 8738 and oss is turned off in winecfg.

The problem with using Voice Modems is that they fall into two categories: 1) Hardware Modems which only have half-duplex transmission of voice 2) Soft/Win/Lin modems which are proprietry and don't have asterisk drivers Please shoot down this recipe before I waste any time trying to acheive it: Rationalisation: ---------------- In Australia and I assume other places, there is no

We want to setup multiple streams using multiple copies of Winamp/SQRSoft crossfader/OddCast. We are guessing that somewhere between 16 and 24 streams may be supported on one dual-processor PC. However, rather than sending the output of all the streams to a soundcard (which may cause problems?), I thought it should be possible to send the output to a dummy soundcard driver. I was sure one

I have a problem, that some programs don't detect my soundcard. Sound works fine in others, but they don't detect it, and refuse to start because of it. Usually the crash logs tell me to make sure that the sound card is enabled, and when listing the hardware, everything else is correctly listed, except the sound card , which shows like: Code: Sound : () How can I configure wine, so

I just upgraded to wine-1.3.25 from the PPA repository and my USB soundcard is no longer recognized. (I have pulseaudio disabled, and the USB set as my "default" card.) I use Dragon NaturallySpeaking. The program's message says "The audio input device is not responding." and "The sound system does not support the requested waveform audio format." But alsamixer

How do I use a voicemodem/soundcard to PSTN-gateway - is it possible ? /HHA

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 hallo I have to take the input from the soundcard of an windows station and stream it so the icecast server to which the clients will actually connect can mount it based on you previous experience, can you tell me what windows program can do that thanks, petre - -- Petre Bandac Network Scientist - - petre at kgb.ro -----BEGIN PGP SIGNATURE-----

Hi @all, I have many domU on my server and they work fine, some of them have their own NICs with the PCI param in the config. Now I try to bring a soundcard for asterisk into a new domU and have the following trouble: rz3-ta:~ # lspci 00:00.0 Multimedia audio controller: Creative Labs SB Audigy (rev 04) PCI: Enabling device 0000:00:00.0 (0000 -> 0001) EMU10K1_Audigy: probe of 0000:00:00.0

Here's a problem that I have uncovered on two entriely separate machines using the latest icecast2 and ices2 software. Even when the onboard soundcard is disabled, the PCI soundcard (which has been both a Creative Live! and an Ensoniq soundcard) is unable to accept input or stdin audio. If I enable the onboard soundcard everything works well and I can stream audio using icecast and ices. But

We want crossfading so we need to use the SQRSoft crossfading Winamp output plugin. Ross. Stefan Neufeind wrote: > If thats the problem, why didn't you mention that before? > http://classic.winamp.com/plugins/detail.jhtml?componentId=28451 Null Output Plugin Null Output Plugin allows to run WinAMP without need of any soundcard installed in the system. [...] On 10 Jun 2003 at 8:21,

Hey all, I've been trying to get MoH to work from the line-in on my soundcard, but as of yet have had no success. I found this script that should allow for it to happen: http://www.sineapps.com/news.php?rssid=722 The script, when run as the asterisk user, works properly and streams sound to stdin. But when Asterisk starts MoH it stops it immediately afterwards with no explanation. Has anyone

Hi, >> ATAL: Error inserting ztdummy >> > (/lib/modules/2.6.22-14-386/misc/ztdummy.ko): Unknown symbol in module, >> > or unknown parameter (see dmesg) > >Are you sure that the source of your kernel is the same as the running >kernel? > >I.E. Have a look at the source it is using while compiling Asterisk and >compare that to uname -a > yes,

Hi, I' still fighting the problem, that I can talk from one SIP phone to another, but I can't hear the output of the playback or similar applications: exten => 202,1,ANSWER() exten => 202,2,PLAYBACK(tt-monkeys) exten => 202,3,HANGUP() When I dial 202, asterisk show the following on the cli: -- Executing [202 at local:1]