similar to: [PATCH RESEND] ptp: add VMware virtual PTP clock driver

From: Vivek Thampi <vithampi at vmware.com> Date: Fri, 28 Feb 2020 05:32:46 +0000 > Add a PTP clock driver called ptp_vmw, for guests running on VMware ESXi > hypervisor. The driver attaches to a VMware virtual device called > "precision clock" that provides a mechanism for querying host system time. > Similar to existing virtual PTP clock drivers (e.g. ptp_kvm),

Hi All, I'm trying to disable USB storage devices in Centos7.1.1503. I've setup udev rules to block all usb devices and then additional rules to allow specific vendors / products to be used (mainly keyboards and mice). This is all working perfectly. cat /etc/udev/rules.d/01-usblockdown.rules # Block all USB devices ACTION=="add", SUBSYSTEMS=="usb", RUN+="/bin/sh

Thomas Hellstrom will be handing over VMware's maintainership of these interfaces to Deep Shah. Signed-off-by: Deep Shah <sdeep at vmware.com> Acked-by: Thomas Hellstrom <thellstrom at vmware.com> --- MAINTAINERS | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index e64e5db31497..c9bdbb65e96b 100644 --- a/MAINTAINERS +++

Thomas Hellstrom will be handing over VMware's maintainership of these interfaces to Deep Shah. Signed-off-by: Deep Shah <sdeep at vmware.com> Acked-by: Thomas Hellstrom <thellstrom at vmware.com> --- MAINTAINERS | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index e64e5db31497..c9bdbb65e96b 100644 --- a/MAINTAINERS +++

I'm now up&running with - mISDN with avmfritz driver for Fritz PCI card - chan_capi from debian recompiled with a patch (see below) - EuroISDN with Point-to-Point (ptp) mode (Austria) - With Asterisk 1.0.7-BRIstuffed-0.2.0-RC7k from debian sarge But am having some problems: 1) I needed to patch chan_capi.c from debian sarge (see below) to give the new channel to asterisk in state

Hi, Posting this again as it has been drowned. can anybody assist? ------------------------------------------------------------------ Hi All, I'm trying to disable USB storage devices in Centos7.1.1503. I've setup udev rules to block all usb devices and then additional rules to allow specific vendors / products to be used (mainly keyboards and mice). This is all working perfectly.

the interesting fact is, it works. I dunno why. but it works :o -----Urspr?ngliche Nachricht----- Von: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] Im Auftrag von bladerunner Gesendet: Freitag, 6. Mai 2005 15:56 An: Asterisk Users Mailing List - Non-Commercial Discussion Betreff: Re: [Asterisk-Users] CAPI on ptp with variable length digits

Alok Kataria will be handing over VMware's maintainership of these interfaces to Thomas Hellstr?m, with pv-drivers as backup contact. Cc: Juergen Gross <jgross at suse.com> Cc: virtualization at lists.linux-foundation.org Cc: x86 at kernel.org Cc: tglx at linutronix.de Cc: mingo at redhat.com Cc: hpa at zytor.com Cc: linux-kernel at vger.kernel.org Cc: Alok Kataria <akataria at

On 10/12/15 15:49, Leon Fauster wrote: > Am 10.12.2015 um 11:11 schrieb Michael H <michael at wemoto.com>: >> >> >> On 10/12/15 10:02, Leon Fauster wrote: >>> Am 10.12.2015 um 09:37 schrieb Michael H <michael at wemoto.com>: >>>> >>>> I'm trying to disable USB storage devices in Centos7.1.1503. >>> >>> on EL6

Hallo all, I am trying to get * with chan_capi and a ptp-ISDN with 4 lines on a AVM C4 card to work. But weather inbound nor outbound is working :( My capi.conf: ; ; CAPI config ; ; [general] nationalprefix=0 internationalprefix=00 rxgain=0.8 txgain=0.8 [interfaces] mode=immediate isdnmode=ptp msn=8993 incomingmsn=* mode=immediate controller=1,2,3,4 softdtmf=1 ;accountcode= context=demo

Hi! I'm goining to connect an AVM C4 to 4 BRI-lines in PTP-Mode, all BRI-lines will have the same number (1234-XX for example). I don't know if this is possible and I can't test it, because I don't have these lines yet. Is anybody out there, running such a configuration? I'm looking for some example configs. Especially I want to know how it is possible, to let asterisk

Hi, Reading http://www.asteriskguru.com/tutorials/bri.html , it seems PtP is the way to connect businesses but if you read http://public.swbell.net/ISDN/connect.html you would think the opposite. Can anyone elaborate a bit PtP or PtmP respective advantages ? Cheers -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello! I finally found a working solution. calling divactrl with the parameter -n [0..20] gives the DID-length means, if you wanna have 123-XXX in digit-wise mode, then call divactrl load -c 1 -n 3 -f ETSI and the card will wait for n digits. regards, Sebastian -----Urspr?ngliche Nachricht----- Von: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com]

hello, i change my isdn line to ptp mode and i have some trouble to configure chan_capi in that way. What is the correct setup - e.g. if numbers are 123456x - where x can be from 0 to 9 ? regards Marian -- SUNTEQ s. r. o. Hviezdoslavova 9 # Prievidza # 971 04 # Slovak republic Tel: +421-46-5430 754 # Fax: +421-46-5439 144 http://www.sunteq.sk/

Hi! Configuration: 2x isdn2 lines in ptp mode 2x hfc cards + zaphfc asterisk with bristuf 0.0.2 problem: sometimes (after asterisk pc reboot???) provider stop forwarding incoming calls (when somebody try call our pbx, he hear announcment about technical problems, but asterisk dont show any information about any incoming calls) Only solution at this time is to call provider to

Am 10.12.2015 um 11:11 schrieb Michael H <michael at wemoto.com>: > > > On 10/12/15 10:02, Leon Fauster wrote: >> Am 10.12.2015 um 09:37 schrieb Michael H <michael at wemoto.com>: >>> >>> I'm trying to disable USB storage devices in Centos7.1.1503. >> >> on EL6 we use: >> >> # cat /etc/modprobe.d/usb-disabled.conf

On 10/12/15 10:02, Leon Fauster wrote: > Am 10.12.2015 um 09:37 schrieb Michael H <michael at wemoto.com>: >> >> I'm trying to disable USB storage devices in Centos7.1.1503. > > on EL6 we use: > > # cat /etc/modprobe.d/usb-disabled.conf > install usb-storage /bin/true > > # depmod -a I've achieved disabling USB devices and then allowing

Hi, I am using Asterisk on a DSS1 ISDN-BRI with ISDN4Linux (and a Fritz Card PnP). The ISDN-BRI is in PTP-Mode (Point to Point "german: Anlagenanschluss") which is enabled within I4L with "hisaxctrl fcpcipnp0 7 1". Everything works fine except that I can not see the called number/MSN of incoming calls within Asterisk and because of this I can not route incoming calls

Hi, We have a little over 100 servers, almost all running CentOS 5.7. Virtually all are Dell servers, generally a mix of 1950s, R610s, and R410s. We use NTP and/or PTP to sync their clocks. One phenomenon we've noticed is that (1) on reboot, the clocks are all greatly out of sync, and (2) if the PTP or NTP process is stopped, the clocks start drifting very quickly. If it was isolated to

Updated VMWARE_BALLOON_CMD to use the common VMW_PORT macro. Doing this rather than replacing all instances of VMWARE_BALLOON_CMD to minimize code change. Signed-off-by: Sinclair Yeh <syeh at vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom at vmware.com> Reviewed-by: Alok N Kataria <akataria at vmware.com> Acked-by: Xavier Deguillard <xdeguillard at vmware.com> Cc: