similar to: Centos 5 -- X default resolution

I originally set up this monitor with an analogue lead. Everything seemed fine, so I didn't check xorg.conf at all. Then I bought a digital lead, and since then the monitor blinks. Running system-config-display identifies it as a 1280 x 1084 CRT monitor. It is an LCD monitor. That model is not on the drop-down list, so assuming that a specific driver wasn't available for it, I

I just bit the bullet and installed CentOS 5 on my work desktop, and although I have two monitors and a card that supports them, I cannot get the display configuration to work with both as a continuous (spanning) desktop. I have tried using the correct (autodetected) monitor type (digital and analog), a generic LCD with 1280x1024, nothing works. Every time I set the configuration, the X server

My OQO has a VIA chipset. From the hwconf: class: VIDEO bus: PCI detached: 0 desc: "VIA Technologies, Inc. CX700M2 UniChrome PRO II Graphics" vendorId: 1106 deviceId: 3157 subVendorId: 1106 subDeviceId: 3157 pciType: 1 pcidom: 0 pcibus: 1 pcidev: 0 pcifn: 0 When I install Centos, I default to the vesa driver, and it operates at the monitor's native 800x480. Of course I

If I use "system-config-display" or "system-config-display --reconfig" although I get a message that I need to log out of GNOME, to have the new file written, for new Display Resolution, logging out or restarting the box does not result in the new settings for the Display taking hold. Sometimes, the number of colors is updated, but *never* the Resolution. Below is my xorg.conf

I just put a 1680x1050 LCD monitor on my home system, and I went into system-config-display to configure it as such, and it just won't take. I had to tweak some of the settings by hand, but when I log out, I get the wide screen for both the Nvidia driver splash screen and the login screen. But, when I log in, It jumps back to 1280x1024 and refuses to run in wide screen mode. Here's the

Hi all! I tried to install and run Jane's USAF and Super Pro 9.4 with no luck. The game installs fine, but I cannot make it work under Linux (P-IV 2.5 + 1Gb RAM + NVidia 440Go (64Mb) with Ubuntu 9.10 + Wine 1.1.35 + NVidia 96.43.13). The game runs fine in this very same computer under Windows XP, and my computer exceeds by far the game's requirements. The original program (Jane's USAF)

Hi all, Up until today everything has been fine with CentOS on my Toshiba laptop. I booted into CentOS 4.3 today and Kudzu detected my video card for some reason. I let it configure it (wish I hadn't now). I can still get in. X and Gnome work. But the video resolution is 800x640. The LCD is capable of 1024x768. I cannot change it using Gnome tools or direct editing of

I have had my "nv" driver lock up a number of times. I downloaded the "nvidia" drivers and they did not work at 1920x1080 resolution. I am looking for an updated driver for just "nv". I found some once for a different driver that you just update commonXXX and yourdriverXXX not the whole X recompile. Where can I find those drivers? THanks, Jerry --------------

Hi, Did anyone manage to get 4.4 working on a Dell D620 laptop? The thing has a 1440x900 LCD screen, but I don't get X the work with that resolution. (lspci: Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller (rev 03)) Google suggested to use '915resolution', which I installed (915resolution-0.5.2-1.el4.rf), but that doesn't help. Regards, --

Ryan wrote: > I did, 1024x768. > Sorry, analog Matthew Miller wrote: > Maybe the problem is just in that adjustment, then. Yes. You need to have your signaling _exact_ when dealing with LCDs. Some are very good at taking the timings of VESA standards. But some support some eccentric Windows timings that are _not_ the exact same as VESA. Or maybe you have configured your monitor for

dear guys, I have a problem between my CentOS 5.5 (on Axioo notebook) and LCD Projector. When I connect my notebook to LCD Projector, it can detect my notebook. But when I press Fn + F7 to activate dual monitor between my notebook and LCD Projector it goes to blank screen. FYI, the LCD Projector is NEC but I don't know the series. I've tried to change display using dual head monitor but

I trying play GTA San Andreas and it is returning " Cannot find 800x600x32 video mode". I worried so my wine Games pointed for a Working Directory that register a dosdevice instead of drive_c. Thereby I'm getting" /home/normal/.wine/dosdevices/c:/Program Files/Rockstar Games/GTA San Andreas" path and "win:EnumDisplayDevicesW ((null),0,0x177f6dc,0x00000000), stub!"

Does anyone have any experience with the combination of a Thinkpad R40 and the ATI Radeon Mobility M6 LY video chip? I''ve had CentOS 4.1, 4.2, and now 4.3 running just great with 1024x768 resolution, but according the IBM specs, this chip is capable of 1280x1024. A quick lspci -v | grep ATI spewed the following: 01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility

Hi! I just setup my ati radeon 9500 with fglrxconfig from the ati 3.7 drivers on a 2.6 kernel. I use primary a monitor and configured the x config file to use the tv as a second monitor which uses a different driver (graphic device section) due to different resolutions. All works pretty perfect, except for wine. No matter what i start in wine, my primary monitor blanks out while the tv keeps on

I asked on the Gentoo forums, and surprisingly haven't gotten an answer. When I run xrandr, I get this output: Code: Screen 0: minimum 2960 x 1050, current 2960 x 1050, maximum 2960 x 1050 default connected 2960x1050+0+0 0mm x 0mm 2960x1050 50.0* I'm using TwinView with a 1680x1050 monitor and a 1280x1024 monitor. And I want to set up some different modes in xrandr. When

Hi, I'd like to run CentOS 7 in a KVM guest (host is my Slackware64 14.1 workstation). The main purpose of this installation will be to build custom RPM packages. I've made a few tests, and everything works more or less as expected. I'd like to resolve a small problem that's nagging me though. When I install a GUI, I usually start by installing a minimal system, then I add some

In the vein of the "Can't get resolution higher than 1280x1024" and "Another CentOS 5 oddity..." threads, I just installed CentOS5 w/Xen kernel on a Sony VAIO desktop with an nVidia NV5M64 (RIVA TNT2 64 Pro) card, using an old Samsung SyncMaster 700NF monitor. system-config-display chose the highest possible resolution for the monitor and Xorg did its best to drive it, but

I have a Centos 5.7 machine with Intel I10 video (built-in, I guess -- this is one of those all-in-one mini terminal things) that I'm trying to put a new 1920x1080 monitor onto, without conspicuous success. Prior to this it's been using a smaller monitor with no issues. Try as I might I can't get the new monitor to run at its 1920x1080 resolution. I just realized that I forgot to

First of all, I am sorry for my bad english. I have a UC-LoGIC WP8060 tablet.I using wizardpen taplet driver. I using PS 7.0 with wine-0.9.33. My Pen worked perfectly with wine-0.9.33, but PS7.0 has some bugs. I update my wine "wine-0.9.56". PS 7.0 working perfectly but my pen has not got pressure sensitive. I turn back wine-0.9.33. I have too much problems PS 7.0. I want to use new

I've fairly recently changed my Linux desktop, and now use a XFree86 server. The default X11() window is rather small: it is supposed to be 7" x 7". However, 1) It is actually just over 5" x 5" and 2) 7" x 7" would be rather small on a 21" screen. The reason for 1) is that DisplayWidthMM give 542mm, when it is really close to 400mm (and the correct