similar to: PXE boot asks for password to login where no password exist

Hi all, i have trouble to PXE boot KVM-based (network of Linux-bridge) Virtual Machines: very slow transfer pxelinux.cfg. ====== tcpdump on KVM host system ==== [root at kvm-test01 ~]# tcpdump -i virbr1 | grep -v ssh | grep 10.0.5.187 tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on virbr1, link-type EN10MB (Ethernet), capture size 96 bytes 17:57:29.809278

Hi Guys, i have a problem with PXE/UEFI Boot. Legacy PXE Boot is working fine. I use Dnsmasq with integrated tftp. As Mentioned above, legacy pxe boot is working fine, tcpdump shows: --- start tcpdump legacy pxe boot --- 13:44:16.589197 IP 0.0.0.0.bootpc > 255.255.255.255.bootps: BOOTP/DHCP, Request from f8:ca:b8:06:7d:ed (oui Unknown), length 548 13:44:20.543910 IP 0.0.0.0.bootpc >

Hello, First, this setup works fine without any error in syslinux 4.06 as show below. For convenience, both versions of syslinux 4.06 [#1] and 5.10 [#2] directories (~2MB each) are uploaded ready for test. As said before, this is tested on qemu-1.5.0 + dnsmasq 2.66 in Arch Linux @ 64-bit. If more info is needed, please let me know. Good luck! Relevant directory structure is at

On 06/06/2013 02:00 AM, Gene Cumm wrote: > On Wed, Jun 5, 2013 at 8:29 PM, Gerardo Exequiel Pozzi > <vmlinuz386 at yahoo.com.ar> wrote: >> Hello, >> >> First, this setup works fine without any error in syslinux 4.06 as show >> below. >> >> For convenience, both versions of syslinux 4.06 [#1] and 5.10 [#2] >> directories (~2MB each) are uploaded

Chris Adams writes: > Once upon a time, isdtor <isdtor at gmail.com> said: > > We have a working PXE setup. I've tried to adapt it to UEFI as per > > RHEL6 manual, but the client won't boot. > > I have BIOS+UEFI PXE boot set up, although it took some doing. I still > use SYSLINUX for BIOS, but GRUB2 plus Red Hat's secure boot shim for > UEFI. I never

Hello i have fedora 11 and build from next branch ovirt during boot by network (pxe) second node appear error. host stay anavailable and not sent to manage node identify data. ping return "unreachable host" Where may be error ? in /var/log/message selinux is permissive Jun 23 06:07:50 main dnsmasq[4500]: DHCPDISCOVER(eth0) 00:30:48:5f:28:40 Jun 23 06:07:50 main dnsmasq[4500]:

Hi there, I am trying to setup a bootable PXELinux (Using 6.02) over UEFI. Currently, I am using DNSMasq for this. PXE with BIOS works perfectly fine for me. As I don't have any UEFI devices here, I am using VMware Workstation 10.0.1 for testing. My DNSMasq setup has been extended, to load also UEFI: dhcp-boot=pxelinux.0 dhcp-match=set:efi-ia32,option:client-arch,6

On 06/12/2013 09:40 AM, Matt Fleming wrote: > On Tue, 11 Jun, at 03:54:21AM, H. Peter Anvin wrote: >> On 06/11/2013 01:03 AM, Matt Fleming wrote: >>> On Mon, 10 Jun, at 07:57:50AM, H. Peter Anvin wrote: >>>> Either that or make the path a list rather than a string, using the >>>> normal word separators when entered on the command line, a bit like the

>From f48d79be8c79241dd4635165e393683809edd823 Mon Sep 17 00:00:00 2001 From: Matt Fleming <matt.fleming at intel.com> Date: Wed, 12 Jun 2013 13:04:44 +0100 Subject: [PATCH] PATH: Change the PATH directive syntax In retrospect, choosing the colon character as the entry separator for the PATH directive was not a smart move, as that character is also used in TFTP-style paths. This conflict

Once upon a time, isdtor <isdtor at gmail.com> said: > We have a working PXE setup. I've tried to adapt it to UEFI as per > RHEL6 manual, but the client won't boot. I have BIOS+UEFI PXE boot set up, although it took some doing. I still use SYSLINUX for BIOS, but GRUB2 plus Red Hat's secure boot shim for UEFI. I never could get SYSLINUX's UEFI support working very

On Wed, 05 Jun, at 09:29:58PM, Gerardo Exequiel Pozzi wrote: > dnsmasq-tftp: file /run/archiso/bootmnt/arch/libcom32.c32 not found > dnsmasq-tftp: file /run/archiso/bootmnt/arch//libcom32.c32 not found > dnsmasq-tftp: file /run/archiso/bootmnt/arch/libcom32.c32 not found > dnsmasq-tftp: file > /run/archiso/bootmnt/arch//arch//boot/syslinux/libcom32.c32 not found OK, here's the

Chris Adams writes: > Once upon a time, isdtor <isdtor at gmail.com> said: > > 11:06:51.413549 IP (tos 0x10, ttl 128, id 0, offset 0, flags [none], proto UDP (17), length 390) > > 10.1.2.2.67 > 255.255.255.255.68: [udp sum ok] BOOTP/DHCP, Reply, length 362, xid 0x4007adc6, Flags [Broadcast] (0x8000) > > Your-IP 10.1.2.57 > > Server-IP

On 06/18/2018 01:00 PM, Daniel. wrote: > Thanks for the reply Laine. My problem is that dnsmasq is masking > dhcpd, xCAT uses dhcpd for PXE stuff. If dnsmasq answer DHCP requests > the PXE boot won' t work. I want to see the logs for ensuring the > dnsmasq is not masking dhcpd. The dnsmasq run by libvirtd only listens on bridges that libvirt itself creates for libvirt virtual

Hello again, * TFTP and DHCP started using: dnsmasq --port=0 \ --no-daemon \ --enable-tftp \ --tftp-root=/run/archiso/bootmnt \ --dhcp-range=192.168.0.2,192.168.0.254,86400 \ --dhcp-boot=/arch/boot/syslinux/gpxelinux.0 \ --dhcp-option-force=209,boot/syslinux/archiso.cfg \ --dhcp-option-force=210,/arch * and for DHCP+HTTP

On Tue, 11 Jun, at 03:54:21AM, H. Peter Anvin wrote: > On 06/11/2013 01:03 AM, Matt Fleming wrote: > > On Mon, 10 Jun, at 07:57:50AM, H. Peter Anvin wrote: > >> Either that or make the path a list rather than a string, using the > >> normal word separators when entered on the command line, a bit like the > >> (t)csh does. That is a bigger change but is probably

>> Thanks. I've looked through all the links, and it seems everything is >> fine wrt. to what was mentioned there (I've disabled 64 bits in mke2fs, >> but it didn't help). I'd be glad to provide more details, but the error >> message is the only info I've got by now. It seems nothing else can be >> got from syslinux shell without modifiying the

On Wed, Jun 5, 2013 at 8:29 PM, Gerardo Exequiel Pozzi <vmlinuz386 at yahoo.com.ar> wrote: > Hello, > > First, this setup works fine without any error in syslinux 4.06 as show > below. > > For convenience, both versions of syslinux 4.06 [#1] and 5.10 [#2] > directories (~2MB each) are uploaded ready for test. > > As said before, this is tested on qemu-1.5.0 +

Once upon a time, isdtor <isdtor at gmail.com> said: > 11:06:51.413549 IP (tos 0x10, ttl 128, id 0, offset 0, flags [none], proto UDP (17), length 390) > 10.1.2.2.67 > 255.255.255.255.68: [udp sum ok] BOOTP/DHCP, Reply, length 362, xid 0x4007adc6, Flags [Broadcast] (0x8000) > Your-IP 10.1.2.57 > Server-IP 10.1.2.1

Hi. I have a machine with a local DHCP server and a couple of virtual networks and I've configured the server for each virtual interface, so that I would be able to install VMs on the corresponding subnets using PXE. The problem is that the two DHCP servers (my local server and dnsmasq) are conflicting with each other causing the boot process to either fails or takes ages untill a VM can

On Fri, 07 Jun, at 10:30:11AM, Matt Fleming wrote: > On Wed, 05 Jun, at 09:29:58PM, Gerardo Exequiel Pozzi wrote: > > dnsmasq-tftp: file /run/archiso/bootmnt/arch/libcom32.c32 not found > > dnsmasq-tftp: file /run/archiso/bootmnt/arch//libcom32.c32 not found > > dnsmasq-tftp: file /run/archiso/bootmnt/arch/libcom32.c32 not found > > dnsmasq-tftp: file > >