similar to: tftpd: write(ack): Operation not permitted

I configure the system of remote boot. Almost all was done. But one simple problem. tftp doesn't download pxelinux.0 from boot-server, in.tftpd is running at. Problem isn't in pxelinux.0, but in protocol itself. I've created test file "test" in /tftpboot and tried to download it but "Timeout occured". From /var/log/messages: Mar 27 16:32:27 dk in.tftpd[26576]:

Uploading a >32MB file from a recent curl to tftpd fails because when the block number rolls back to 0, tftpd transmits the option ack again, instead of transmitting an acknowledgment for the block received. You don't see this problem when using the bundled tftp client because it doesn't set any of the options when uploading a file. Attached is a patch that fixes this, tested against

On Sun, Jan 29, 2017 at 12:09:43PM +0100, Uwe Kleine-K?nig wrote: > AI_CANONNAME is only relevant when the resulting official name is used, > which is not the case in tftpd for the address to bind to. Also > AI_ADDRCONFIG isn't helpful. This flag is good for sockets used to > connect(2) somewhere. But for listening sockets it makes tftpd fail to > start when -a 0.0.0.0:69 is

Hello, I need help in setting up tftpd-hpa to send a kernel to a client, on a debian woody installation. I did manage the feat when using tftpd to send a kernel to a client which had a separate network interface card, but I would like to do it with integrated LAN. Trials with tftpd failed with error messages starting with 'PXE', and later I learned that tftpd-hpa is needed for the PXE

Op 2013-08-26 om 09:35 schreef John McDonnell: > On Behalf Of Geert Stappers > Sent: Sunday, August 25, 2013 6:42 AM > > > > On my previous TFTP server I had logging. I did see all requests > > in logfiles. > > > > On my current TFTP server I have also added the options '-v -v -v', > > but no logging. At least I can't find it them in

On my registration form I have a checkbox for a waiver. In the model I have the statement: validates_acceptance_of :waiver, :on => :create, :message => "must be accepted" In the view: <%= check_box_tag("waiver") %> <%= error_message_on "user", "waiver", "Waiver "%> For some reason validate is accepting everything when the

This is more a question than a serious proposal. The name of the pid file should probably be configurable, and it should be unlinked on normal termination, but no such thing exists in standalone mode. SIGTERM and SIGINT should be catched and considered normal, I guess. Signed-off-by: Ferenc Wagner <wferi at niif.hu> --- tftpd/tftpd.c | 7 +++++++ 1 files changed, 7 insertions(+), 0

Signed-off-by: Ferenc Wagner <wferi at niif.hu> --- tftpd/tftpd.c | 8 ++++---- 1 files changed, 4 insertions(+), 4 deletions(-) diff --git a/tftpd/tftpd.c b/tftpd/tftpd.c index 1f5d9d6..ff39c85 100644 --- a/tftpd/tftpd.c +++ b/tftpd/tftpd.c @@ -364,7 +364,7 @@ int main(int argc, char **argv) srand(time(NULL) ^ getpid()); while ((c = getopt_long(argc, argv, short_options,

I believe I have encountered a problem with tftpd-hpa very similar to the problem described in the following link: http://syslinux.zytor.com/archives/2003-May/001955.html We were running tftpd-hpa version 0.29 on RedHat 8.0 (on an older Dell desktop), and upgraded to tftpd-hpa version 0.42 when the problem was discovered; however, we are seeing the same thing after the upgrade. The TFTP

The default path is /var/run/tftpd-hpa.pid, which can be overridden by the newly introduced -P option. On normal termination (SIGTERM or SIGINT) the pid file is automatically removed. Moved setting the umask later, right before entering the select loop, so that it does not affect the permissions of the pid file. Signed-off-by: Ferenc Wagner <wferi at niif.hu> --- tftpd/tftpd.c | 38

Hi, This patch implements a minimal getpwnam() function in tftpd.c. The reason for the patch is that I needed tftpd to work in my embedded system, which are without libnss*. The patch has been tested, and works for me. Please consider it. Best regards, jules -- Jules Colding <JuBColding at yorkref.com> York Refrigeration diff -urN tftp-hpa-0.34.orig/tftpd/Makefile

Hi, when i look in my syslog i see. (syslog) Mar 12 04:40:49 linuxdev in.tftpd[15218]: RRQ from 10.1.5.121 filename scx.elf.gz Mar 12 04:40:49 linuxdev in.tftpd[15218]: sending NAK (1, File not found) to 10.1.5.121 here my client has asked for a file, and tftpd has said that it does not exist in its path (or cannot access it). looking in the tftpd.c (from 0.36) i see that on line 779 this

Hi, I've been struggling with this problem for the last couple of hours and am nowhere near solving the problem. I am trying to run a tftp server in a chroot jail. Now perhaps I am being paranoid, but I would like to have it launched from within its own jail even if it supposedly does a chroot itself and runs with a parameterizable user. I downloaded the atftp-server package and tried

On 07/29/2015 01:45 AM, Ron via Syslinux wrote: > > Take 2 at bouncing this to the rest of the original recipients through a > different MTA, since mail.zytor.com refused to accept it the first time. > > Please re-add Jason Gunthorpe <jgg at obsidianresearch.com> and > 793921 at bugs.debian.org to the CC for replies. > > > On Wed, Jul 29, 2015 at 05:34:00PM

> Correct. Like most UDP-based inetd services, tftpd is intended to be run in 'wait' mode. When the first request arrives, inetd starts the service but does not read the incoming packet (it can't, because it has no way to pass it along to the server). After that, inetd ignores that socket until the server exits. This isn't critical for tftp, but it does help to keep down the

I cannot seem to get the remap-file function of tftpd working right. I can sucessfully place files on the server but the remap feature is not working. I look in the logfile and it has an entry in there for tftpd. remap: input: startup-config Jan 13 21:47:50 proxy in.tftpd[25438]: remap: done Jan 13 21:47:50 proxy in.tftpd[25438]: RRQ from 192.168.0.12 filename startup-config I think that I

If I omit --secure from the tftpd-hpa command line, I then need to e.g. `tftp -c get /var/lib/tftpboot/vmlinuz` instead of plain /vmlinuz, even though I pass /var/lib/tftpboot as the tftp dir in the tftpd-hpa command line. That essentially means that I'm exporting my whole /, which is clearly something I don't want to do. I basically want tftpd-hpa to serve files from /var/lib/tftpboot

Hi! I am using OpenBSD 4.4 with the build-in TFTP-Daemon for PXE. Distributing OpenBSD works fine. Now I want to distribute OpenBSD and WinPE. I've installed PXELinux 3.72 and configured it. Works also fine for PXELinux and distributing OpenBSD. To distribute WinPE I need a remap rule (\ -> /) for the TFTP-Daemon. I've created a file /etc/tftpd.remap with the following rule: rgG \\ /

Hello, we have two diskless machines in a routed network. Both get their IP adresse and tftp configuration via dhcp. When we start one machine all works well, when the second machine tries to download the kernel via tftp we get this error: Jul 8 09:49:52 voyager2 in.tftpd[8374]: RRQ from 10.63.5.122 filename /andreas/pxelinux.0 Jul 8 09:49:53 voyager2 in.tftpd[8374]: tftpd: read: Connection

On Thu, 2014-01-30 at 11:25 -0500, Dan Swartzendruber wrote: > Hopefully I'm not out to lunch here. I ported tftp-hpa to our proprietary > OS, VOS (at stratus.com). We've always runs the old legacy tftpd from > inetd, so I wanted to continue doing so with tftp-hpa. It seems to work > okay, but I noticed that the code in tftpd.c has a 'while (1)' loop that > has