similar to: Trying to boot a SSD of 500GB

> Yes, I tried to dd the mbr.bin and use both --install and --stupid parameters. > > The FAT32 partition is bootable. > > > Here is what I did: > > $ sudo fdisk /dev/sda -l > > Disk /dev/sda: 500.1 GB, 500107862016 bytes > 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors > Units = sectors of 1 * 512 = 512 bytes > Sector size

Yes, I tried to dd the mbr.bin and use both --install and --stupid parameters. The FAT32 partition is bootable. Here is what I did: $ sudo fdisk /dev/sda -l Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal):

I am trying to mount a FAT32 partition in CentOS. I'm following the instructions on this page: http://www.linuxforum.com/linux_tutorials/14/1.php This is the line I put into /etc/fstab /dev/hda /mnt/windows vfat users,owner,rw,umask=000 0 0 And this is the error I get: [root at localhost mnt]# mount -a mount: wrong fs type, bad option, bad superblock on

Hi all I have a remote server (i.e SSH access only) which was incorrectly partitioned and I urgently need to get it up and running. It's got a 500GB HDD, but the PV is only 10GB big, so I can't add more LV's to to. P.S. This is on LVM, btw. [root at nd11176 ~]# fdisk -l /dev/sda Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders

Hi, I'm trying to install debian-6.0.5-amd64-CD-1.iso from USB memory-stick. The problem is, that Debian-Installer is not able to "Detect and mount CD-ROM" during the installation process. The USB memory-stick is a 2GB model containing MBR and FAT32 file system: # fdisk -lu /dev/sdb Disk /dev/sdb: 2013 MB, 2013265920 bytes 62 heads, 62 sectors/track, 1022 cylinders, total 3932160

Greetings, I''ve had no success with mounting a vfat file system created by a Windows XP guest on a lvm volume. # mount -t vfat /dev/vg1/win1 /mnt/ mount: wrong fs type, bad option, bad superblock on /dev/vg1/win1, missing codepage or other error In some cases useful info is found in syslog - try dmesg | tail or so # dmesg FAT: invalid media value (0xb9) VFS:

Hi All I've just shifteed over to linux,form Windows.I 'm having 5 partations for use by my windows XP Professional and another one by linux.The partation table is as shown : ------------------------------------------------------------------------------------------------------------------------------------------ [root at localhost6 ~]# fdisk -l Disk /dev/hdc: 250.0 GB, 250059350016

I am trying to install CentOS 4.6 to a pair of 750GB hard drives. I can successfully install to either of the drives as a single drive, but when I try to use both drives and mirror the partitions, I start having problems. Anaconda crashes as it is trying to format the drives. This is what I'm trying to create: /dev/md0: 200MB, /boot /dev/md1: 2GB, swap /dev/md2: rest of the

greetings, since i have a test server in front of me and i have never tried it i request your assistance please. ive always been a fdisk and lilo person i have a fresh CentOS 4 "test" install on a WD120 sata /dev/sda /dev/sda1 / /dev/sda2 /boot /dev/sda3 swap and it just so happens i have a old test 17Gig Maxtor PATA with a fresh Win98 on it from helping my father migrate to a newer

Hi, I bought a 16GB Transcend JetFlash V10 yesterday and am trying to put the fc8 livecd on it (after filling it up with all sorts of other junk :) I've only plugged it into an fc8 machine (from unopened) - nothing else. I also have a Toshiba U3 2GB USB. The OS is fc8 fully updated except the kernel (2.6.23.15-137.fc8) the livecd-iso-to-disk uses the command "syslinux -d syslinux

> > Both sticks show very unusual factors for heads and sectors > > which are hardly intentional. If BIOS gets confused like fdisk, > > then the failure to find files is quite plausible. > > > > ------------------------------------------------------------- > > > > Could you please exercise what is described for Linux in > >

My previous question: "can syslinux on a USBstik also boot installations on other USB devices ?" got no proper reply, so I'm now including more background detail. The new problem is that my 32bit partition of ETHOberon, only gives a proper font-size under Debian7:DVDinstaller:rescueMode, since I'm forced to use a laptop, after my previous systems were stolen. Neither gnome nor

> > In message <BLU0-SMTP2805E16A0E7A33B925EDF458BB80 at phx.gbl>, > Ady <ady-sf at hotmail.com> wrote: > > >Now, to move forward with Clonezilla in your USB drive, we need to > >proceed with some steps that are not as simple as dd'ing an image. > > Apologies for my impertinence, but I have one question: Why? > > I was under the impression

Hello Everyone, I have a CentOS 6.3 host running a few KVMs. One of them is a CentOS 6.3 KVM that I want to use for making backups with BackupPC. What I'm having a problem with is assigning the KVM an external drive. I used to run BackupPC on an Ubuntu box. The backups went to an external eSATA 1.5TB, ext4 format, single partition drive (regular 3.5" in an enclosure). I want to now

I am trying to setup vinum on a box using 4.8 RELENG_4 (as of about a week ago snapshot). This box was running 4.6 /w vinum on same hard drives for the last 4 months wonderfully... but since it is my current 'scratch/backup' box, I just reinstalled with -STABLE. # uname -a FreeBSD polya.axista.com 4.8-STABLE FreeBSD 4.8-STABLE #22: Tue Jun 24 17:01:07 EDT 2003

Hello, Im trying to learn syslinux and want to create a multiboot flashdrive, which will have more than one liveCD available for booting. I've installed a simple live cd (secure linux live cd disk#1) to my Fat32 partition. It boots well. Now i want to add another live CD (geexbox disk#2) to boot from the same Fat32 partition. I need to copy some files from live cd (geexbox) and add them

Sorry if this is a total noob question... I've searched the archives and haven't turned up much. Not turning up much on the web in general, either. I'm working on a project and I'd like to create a Linux bootable ISO disc with an extra chunk of data **outside** the ISO space. This chunk of data might be a 10MB tar/zip. The goal would be to boot into Linux in RAM off the disc

I've tried to create a Linux swap file, but when I run fdisk, it looks like this: Device Boot Start End Blocks Id System /dev/hdb1 * 1 3644 29270398+ 83 Linux /dev/hdb2 3645 3737 747022+ f W95 Ext'd (LBA) /dev/hdb5 3645 3737 746991 82 Linux swap Why is this W95 partition existing in the

Hi everyone, I just finished installing FreeBSD 6 RELEASE on my Toshiba Tecra A4 laptop and the installation was fine, however, when I rebooted the machine, I don't get the boot loader screen as if the machine can not see my drive! I tried the reinstalling and ensured that I set the slice to be bootable but that didn't change anything. Not sure if this is a common issue with FreeBSD 6 on

Hello listmates, Here's I am, trying to install Centos 6.2 64-bit on a server with 24 TB of disk RAIDed as RAID 6. So I get this 18 TB disk (the RAID is recognized as one disk) where I am trying to put my OS. And I can create a couple of partitions - let us say I defiine a 150 GB swap, a 150 GB "/", a 100 GB "/var". So far so good. Then I try to define the next one, say, a