similar to: [ANNOUNCE] libdrm 2.4.82

I have found a: HPE 873830-S01 ProLiant MicroServer Gen10 for <$300 without drives.? If I can believe the seller, it has a AMD Opteron X3216 Dual-core (2 Core) 1.6GHz and 8GB Installed. It has 4 3.5" bays. and 1? "Media" bay? https://www.servertechsupply.com/873830-s01/ this could well be acceptable.? Got to find out power draw.? Looks like ~40W. Any input on issues of OS

Just starting and trying to boot off the SPP firmware update ISO image on a USB stick. I made the stick with: # mkfs.vfat /dev/sdb # dd bs=4M if=P52581_001_gen10spp-2022.09.01.00-SPP2022090100.2022_0930.1.iso of=/dev/sdb status=progress The usb drive is 16GB and the iso is 9GB. seem to boot from it and go into auto install of firmware then died with starting initrd... warning!!! Unable to

> Just starting and trying to boot off the SPP firmware update ISO image > on a USB stick. > > I made the stick with: > > # mkfs.vfat /dev/sdb ^^^^^^^^^^^^^^^^^^^^ Why create an MS-DOS filesystem on the stick which gets immediately overwritten in the next step? > # dd bs=4M > if=P52581_001_gen10spp-2022.09.01.00-SPP2022090100.2022_0930.1.iso > of=/dev/sdb

On 1/9/23 01:37, Simon Matter wrote: >> Just starting and trying to boot off the SPP firmware update ISO image >> on a USB stick. >> >> I made the stick with: >> >> # mkfs.vfat /dev/sdb > ^^^^^^^^^^^^^^^^^^^^ > Why create an MS-DOS filesystem on the stick which gets immediately > overwritten in the next step? I think the idea is to get that first

Hi > Continuing this thread, and focusing on RAID1. > > I got an HPE Proliant gen10+ that has hardware RAID support.? (can turn > it off if I want). What exact model of RAID controller is this? If it's a S100i SR Gen10 then it's not hardware RAID at all. > > I am planning two groupings of RAID1 (it has 4 bays). > > There is also an internal USB boot port. >

A new intel-gpu-tools quarterly release is available with the following changes: Library changes: - Added helpers for launching external processes and capturing their outputs. (Abdiel Janulgue) - Increased max pipe count to 6 to support AMD GPUs. (Leo (Sunpeng) Li) - Various improvements for Chamelium support. (Paul Kocialkowski) - Added Coffeelake platform support. (Rodrigo Vivi, Anusha

This release adds a fallback for realpath() which was blocked by the web-browser sand-boxing. While the browsers are fixed-up they seem to have little incentive to roll bugfix releases :-\ -Emil Ayan Kumar Halder (1): libdrm: headers: Sync with drm-next Christian König (4): tests/amdgpu: add unaligned VM test amdgpu: remove invalid check in amdgpu_bo_alloc test/amdgpu:

Hello, I am a user of CentOS 7.6. I came here for help. I recently bought a microserver called HPE Proliant MicroServer Gen10(X3216 APU). CentOS 7.6 was installed for it. I found that the fan of the machine would keep turning and the noise was very loud. I searched everywhere but I couldn't find any way out. Pardon my ignorance showing. I don?t know where to seek help. When I use

I have installed spamassassin, per the instructions on Scalix's wiki, and it is working, with some important caviats. So I asked for help on the spamassassin user list, and got some, but I think I am butting up against some Centos specific issues... This is what I am seeing in the maillog: Aug 17 14:39:59 z9m9z sendmail[13082]: l7HIdvGf013082: Milter add: header: X-Spam-Checker-Version:

hi guys, what I would like to ask is DDR4 3200Mhz in these server - has anybody tried? many thanks, L.

Hello, A new intel-gpu-tools quarterly release is available with the following changes: - New KMS test: tests/kms_cursor_legacy (Stress legacy cursor ioctl) (Chris Wilson) - Several GEM tests have been removed from BAT: tests/gem_exec_whisper, tests/gem_sync (dropped individual engines), test/gem_cs_prefetch (replaced by test/gem_exec_gttfill), tests/gem_ctx_param_basic (got relabeled to

Hello Guys, in the mean while i compiled and tested fallow http://centos.cms4all.org/repo/7/kernel/ Kernel 4.12.4, feels more stable as 4.12.0 (+ RadeonSI Flags) Drivers Libdrm 2.4.82, added a patch from git (intel and dri2) xorg-x11-drv-intel Added btrfs-progs 4.12. to my driver section, because fedora coopr doesn't compile i686 for centos. By the next release of intel drivers I rename

https://bugs.freedesktop.org/show_bug.cgi?id=104237 Bug ID: 104237 Summary: nouveau-related kmail crash Product: xorg Version: unspecified Hardware: Other OS: All Status: NEW Severity: normal Priority: medium Component: Driver/nouveau Assignee: nouveau at lists.freedesktop.org

hi guys does anybody here runs on HPE ProLiant? I was hoping you can tell whether HPE support Linux Vendor Firmware Service and you actually get to upgrade ProLiants' BIOS/firmware via fwupdmgr? many thanks, L.

Continuing this thread, and focusing on RAID1. I got an HPE Proliant gen10+ that has hardware RAID support.? (can turn it off if I want). I am planning two groupings of RAID1 (it has 4 bays). There is also an internal USB boot port. So I am really a newbie in working with RAID.? From this thread it sounds like I want /boot and /boot/efi on that USBVV boot device. Will it work to put / on

Once upon a time, Simon Matter <simon.matter at invoca.ch> said: > Are you sure that's still true? I've done it that way in the past but it > seems at least with EL8 you can put /boot/efi on md raid1 with metadata > format 1.0. That way the EFI firmware will see it as two independent FAT > filesystems. Only thing you have to be sure is that nothing ever writes to >

https://bugs.freedesktop.org/show_bug.cgi?id=102192 Bug ID: 102192 Summary: Dell XPS 15 9560: PU: 1 PID: 58 at drivers/gpu/drm/nouveau/nvkm/subdev/mmu/gf100.c:190 gf100_vm_flush+0x1b3/0x1c0 [nouveau] Product: xorg Version: unspecified Hardware: x86-64 (AMD64) OS: Linux (All)