similar to: [PATCH 0/3] MST BPC fixes for nouveau

I -thought- I had fixed this entirely, but it looks like that I didn't test this thoroughly enough as we apparently still make one big mistake with nv50_msto_atomic_check() - we don't handle the following scenario: * CRTC #1 has n VCPI allocated to it, is attached to connector DP-4 which is attached to encoder #1. enabled=y active=n * CRTC #1 is changed from DP-4 to DP-5, causing: *

This fixes the extra issues I discovered upstream after the introduction of my rework of the atomic VCPI helpers that occur during suspend/resume. This time around, we use a slightly different but much less complicated approach for fixing said issues. Cc: Daniel Vetter <daniel at ffwll.ch> Lyude Paul (4): drm/dp_mst: Fix unbalanced malloc ref in drm_dp_mst_deallocate_vcpi()

I -thought- I had fixed this entirely, but it looks like that I didn't test this thoroughly enough as we apparently still make one big mistake with nv50_msto_atomic_check() - we don't handle the following scenario: * CRTC #1 has n VCPI allocated to it, is attached to connector DP-4 which is attached to encoder #1. enabled=y active=n * CRTC #1 is changed from DP-4 to DP-5, causing: *

On Thu, 2019-08-08 at 18:17 +0000, William Lewis wrote: > On 8/8/19 1:04 PM, Lyude Paul wrote: > > I -thought- I had fixed this entirely, but it looks like that I didn't > > test this thoroughly enough as we apparently still make one big mistake > > with nv50_msto_atomic_check() - we don't handle the following scenario: > > > > * CRTC #1 has n VCPI

Currently, nouveau doesn't actually bother to try probing whether or not it can actually handle interlaced modes over DisplayPort. As a result, on volta and later we'll end up trying to set an interlaced mode even when it's not supported and cause the front end for the display engine to hang. So, let's teach nouveau to reject interlaced modes on hardware that can't actually

This fixes the extra issues I discovered upstream after the introduction of my rework of the atomic VCPI helpers that occur during suspend/resume. This time around, we use a slightly different but much less complicated approach for fixing said issues. Cc: Daniel Vetter <daniel at ffwll.ch> Lyude Paul (4): drm/dp_mst: Fix unbalanced malloc ref in drm_dp_mst_deallocate_vcpi()

This allows us to advertise more modes especially on HDR displays. Fixes using 4K at 60 modes on my TV and main display both using a HDMI to DP adapter. Also fixes similiar issues for users running into this. Cc: stable at vger.kernel.org # 5.10+ Signed-off-by: Karol Herbst <kherbst at redhat.com> --- drivers/gpu/drm/nouveau/dispnv50/disp.c | 32 +++++++++++++++++++++++++

Looks like a regression got introduced into nv50_mstc_atomic_check() that somehow didn't get found until now. If userspace changes crtc_state->active to false but leaves the CRTC enabled, we end up calling drm_dp_atomic_find_vcpi_slots() using the PBN calculated in asyh->dp.pbn. However, if the display is inactive we end up calculating a PBN of 0, which inadvertently causes us to have an

Currently, nouveau doesn't actually bother to try probing whether or not it can actually handle interlaced modes over DisplayPort. As a result, on volta and later we'll end up trying to set an interlaced mode even when it's not supported and cause the front end for the display engine to hang. So, let's teach nouveau to reject interlaced modes on hardware that can't actually

Currently, nouveau doesn't actually bother to try probing whether or not it can actually handle interlaced modes over DisplayPort. As a result, on volta and later we'll end up trying to set an interlaced mode even when it's not supported and cause the front end for the display engine to hang. So, let's teach nouveau to reject interlaced modes on hardware that can't actually

This patchset does some cleaning up of the atomic VCPI helpers for MST, and converts nouveau over to using them. I would have included amdgpu in this patch as well, but at the moment moving them over to the atomic helpers is nontrivial. Cc: Daniel Vetter <daniel at ffwll.ch> Lyude Paul (4): drm/dp_mst: Add some atomic state iterator macros drm/dp_mst: Start tracking per-port VCPI

[sorry about the resend-copy pasted the wrong header and I want to make sure this doesn't get missed!] This patchset does some cleaning up of the atomic VCPI helpers for MST, and converts nouveau over to using them. I would have included amdgpu in this patch as well, but at the moment moving them over to the atomic helpers is nontrivial. Cc: Daniel Vetter <daniel at ffwll.ch> Lyude

This patchset does some cleaning up of the atomic VCPI helpers for MST, and converts nouveau over to using them. I would have included amdgpu in this patch as well, but at the moment moving them over to the atomic helpers is nontrivial. Cc: Daniel Vetter <daniel at ffwll.ch> Lyude Paul (5): drm/dp_mst: Add some atomic state iterator macros drm/dp_mst: Start tracking per-port VCPI

This patchset does some cleaning up of the atomic VCPI helpers for MST, and converts nouveau over to using them. I would have included amdgpu in this patch as well, but at the moment moving them over to the atomic helpers is nontrivial. Cc: Daniel Vetter <daniel at ffwll.ch> Lyude Paul (5): drm/dp_mst: Add some atomic state iterator macros drm/dp_mst: Start tracking per-port VCPI

This is the series I've been working on for a while now to get all of the atomic DRM drivers in the tree to use the atomic MST helpers, and to make the atomic MST helpers actually idempotent. Turns out it's a lot more difficult to do that without also fixing how port and branch device refcounting works so that it actually makes sense, since the current upstream implementation requires a

This is the series I've been working on for a while now to get all of the atomic DRM drivers in the tree to use the atomic MST helpers, and to make the atomic MST helpers actually idempotent. Turns out it's a lot more difficult to do that without also fixing how port and branch device refcounting works so that it actually makes sense, since the current upstream implementation requires a

This is the series I've been working on for a while now to get all of the atomic DRM drivers in the tree to use the atomic MST helpers, and to make the atomic MST helpers actually idempotent. Turns out it's a lot more difficult to do that without also fixing how port and branch device refcounting works so that it actually makes sense, since the current upstream implementation requires a

Prefer the parsed results for is_hdmi and has_audio in display info over calling drm_detect_hdmi_monitor() and drm_detect_monitor_audio(), respectively. Conveniently, this also removes the need to use edid_blob_ptr. Cc: Karol Herbst <kherbst at redhat.com> Cc: Lyude Paul <lyude at redhat.com> Cc: Danilo Krummrich <dakr at redhat.com> Cc: nouveau at lists.freedesktop.org

This is the series I've been working on for a while now to get all of the atomic DRM drivers in the tree to use the atomic MST helpers, and to make the atomic MST helpers actually idempotent. Turns out it's a lot more difficult to do that without also fixing how port and branch device refcounting works so that it actually makes sense, since the current upstream implementation requires a

This patchset does some cleaning up of the atomic VCPI helpers for MST, and converts nouveau over to using them. I would have included amdgpu in this patch as well, but at the moment moving them over to the atomic helpers is nontrivial. Cc: Daniel Vetter <daniel at ffwll.ch> Lyude Paul (5): drm/dp_mst: Add some atomic state iterator macros drm/dp_mst: Start tracking per-port VCPI