similar to: next/master boot bisection: Oops in nouveau driver on jetson-tk1

uhhhhhhhhhhhhh didn't we fix this weeks ago? with "drm/nouveau: tegra: Call nouveau_drm_device_init()" On Fri, 2018-12-07 at 23:31 +0000, Guillaume Tucker wrote: > Please find below an automated bisection report for a kernel Oops > seen during the initialisation of the nouveau GPU driver on > jetson-tk1. > > > All the LAVA test jobs for this bisection can be

On 08/12/2018 00:08, Lyude Paul wrote: > uhhhhhhhhhhhhh > didn't we fix this weeks ago? with "drm/nouveau: tegra: Call > nouveau_drm_device_init()" Yes here's the fix from Thierry: https://patchwork.freedesktop.org/patch/263587/ and I can confirm that it does fix the Oops when applied on top of next-20181206 (what I used for the bisection last week):

This series is intended to add support for shutting down the GPU on kernel shutdown/reboot using the ->shutdown() hook, similar to what amdgpu does. This is mainly intended to workaround a bios issue on the P50 that was preventing nouveau from initializing the dedicated GM107 GPU on that system properly. You can find more details on this issue in the patch labeled "Shut down GPU on kernel

It simplifies nouveau code by removal of detection which region to pass to kick vesafb/efifb. Signed-off-by: Marcin Slusarz <marcin.slusarz at gmail.com> Cc: Eric Anholt <eric at anholt.net> Cc: Ben Skeggs <bskeggs at redhat.com> Cc: Thomas Hellstrom <thellstrom at vmware.com> Cc: Dave Airlie <airlied at redhat.com> Cc: Peter Jones <pjones at redhat.com> Cc:

On Fri, Nov 6, 2020 at 3:17 AM Jeremy Cline <jcline at redhat.com> wrote: > > Make use of the devm_drm_dev_alloc() API to bind the lifetime of > nouveau_drm structure to the drm_device. This is important because a > reference to nouveau_drm is accessible from drm_device, which is > provided to a number of DRM layer callbacks that can run after the > deallocation of

On Wed, Aug 07, 2013 at 08:04:07PM -0700, Sudeep Dutt wrote: > +/** > + * struct mic_device - MIC device information for each card. > + * > + * @name: Unique name for this MIC device. > + * @mmio: MMIO bar information. > + * @pdev: The PCI device structure. > + * @family: The MIC family to which this device belongs. > + * @ops: MIC HW specific operations. > + * @id: The

On Wed, Aug 07, 2013 at 08:04:07PM -0700, Sudeep Dutt wrote: > +/** > + * struct mic_device - MIC device information for each card. > + * > + * @name: Unique name for this MIC device. > + * @mmio: MMIO bar information. > + * @pdev: The PCI device structure. > + * @family: The MIC family to which this device belongs. > + * @ops: MIC HW specific operations. > + * @id: The

fb_do_apertures_overlap is returning wrong value when one aperture is completely whithin the other. Add generic ranges_overlap macro (probably kernel.h candidate) and use it here. Signed-off-by: Marcin Slusarz <marcin.slusarz at gmail.com> Cc: Dave Airlie <airlied at redhat.com> Cc: Peter Jones <pjones at redhat.com> Cc: Andrew Morton <akpm at linux-foundation.org> ---

Hi folks, Currently, when the device is removed (or the driver is unbound) the nouveau_drm structure de-allocated. However, it's still accessible from and used by some DRM layer callbacks. For example, file handles can be closed after the device has been removed (physically or otherwise). This series converts the Nouveau device structure to be allocated and de-allocated with the

From: Thierry Reding <treding at nvidia.com> As part of commit cfea88a4d866 ("drm/nouveau: Start using new drm_dev initialization helpers"), the initialization of the Nouveau DRM device was reworked and along the way the platform driver initialization was left incomplete. Add a call to nouveau_drm_device_init() to make sure all of the structures are properly initialized.

This patch series is the final (?) step towards the initial support of GK20A, allowing it to be probed and used (currently at a very slow speed, and for offscreen rendering only) on the Jetson TK1 and Venice 2 boards. The main piece if the first patch which adds platform devices probing support to Nouveau. There are probably lots of things that need to be discussed about it, e.g.: * The way the

Currently vesafb/efifb/... is kicked when hardware driver is registering framebuffer. To do it hardware must be fully functional, so there's a short window between start of initialisation and framebuffer registration when two drivers touch the hardware. Unfortunately sometimes it breaks nouveau initialisation. Fix it by kicking firmware driver(s) before we start touching the hardware.

It removes a hack from nouveau code which had to detect which region to pass to kick vesafb/efifb. Signed-off-by: Marcin Slusarz <marcin.slusarz at gmail.com> Cc: Eric Anholt <eric at anholt.net> Cc: Ben Skeggs <bskeggs at redhat.com> Cc: Thomas Hellstrom <thellstrom at vmware.com> Cc: Dave Airlie <airlied at redhat.com> Cc: Peter Jones <pjones at redhat.com>

On Tue, 17 Sep 2019 at 01:18, Thierry Reding <thierry.reding at gmail.com> wrote: > > From: Thierry Reding <treding at nvidia.com> > > The gk20a (as well as all subsequent Tegra instantiations of the GPU) do > in fact use the same apertures as regular GPUs. Prior to gv11b there are > no checks in hardware for the aperture, so we get away with setting VRAM > as the

Make use of the devm_drm_dev_alloc() API to bind the lifetime of nouveau_drm structure to the drm_device. This is important because a reference to nouveau_drm is accessible from drm_device, which is provided to a number of DRM layer callbacks that can run after the deallocation of nouveau_drm currently occurs. Signed-off-by: Jeremy Cline <jcline at redhat.com> ---

Turing introduced a new simplified page kind scheme, reducing the number of possible page kinds from 256 to 16. It also is the first NVIDIA GPU in which the highest possible page kind value is not reserved as an "invalid" page kind. To address this, the invalid page kind is made an explicit property of the MMU HAL, and a new table of page kinds is added to the tu102 MMU HAL. One

This series cleans up duplicated code for replacing firmware FB driver with proper DRI driver and adds handover support to Tegra driver. This is a sligtly updated version of a series sent on 24 Nov 2017. --- v2: - rebased on current drm-next - dropped staging/sm750fb changes - added kernel docs for DRM helpers v3: - move kerneldoc to fbdev, where functions are implemented - split kerneldoc

This series cleans up duplicated code for replacing firmware FB driver with proper DRI driver and adds handover support to Tegra driver. This is a sligtly updated version of a series sent on 24 Nov 2017. --- v2: - rebased on current drm-next - dropped staging/sm750fb changes - added kernel docs for DRM helpers v3: - move kerneldoc to fbdev, where functions are implemented - split kerneldoc

This v4 is now a 3 piece series, after Alexandre pointed out that both GF 100 and NV50 are affected by the same issue, and that a related issue has been solved already for Tegra in commit 9d0394c6bed5 ("drm/nouveau/instmem/gk20a: set DMA mask early"). The issue that this series addresses is the fact that the Nouveau driver invokes the DMA API before setting the DMA mask. In both cases

From: Thierry Reding <treding at nvidia.com> Hi Ben, these are a couple of patches that are in preparation for adding GV11B support. The fundamental issue that these are trying to solve is that the GV11B is the first Tegra incarnation of the GPU where the aperture really matters. All prior generations would accept any of them. For dGPUs we usually allocate memory in VRAM, so the default