similar to: [PATCH] drm/nouveau: Make clock gate support conditional

On Fri, Jan 26, 2018 at 4:35 AM, Lyude Paul <lyude at redhat.com> wrote: > This adds support for enabling automatic clockgating on nvidia GPUs for > Kepler1. While this is not technically a clockgating level, it does > enable clockgating using the clockgating values initially set by the > vbios (which should be safe to use). > > This introduces two therm helpers for

Next version of my patchseries for adding clockgating support for kepler1 and 2 on nouveau. The first version of this series can be found here: https://patchwork.freedesktop.org/series/36504/ Some very important changes: - Fix gf100_clkgate_init() to actually write registers! This got broken in the last version by accident - Dump the register packs and the resulting register writes into

Next version of my patchseries for adding clockgating support for kepler1 and 2 on nouveau. The first version of this series can be found here: https://patchwork.freedesktop.org/series/36504/ One small change: - Set therm->clkgate_enabled to false until the last patch, where we introduce the NvPmEnableGating option Lyude Paul (5): drm/nouveau: Add support for basic clockgating on

Next version of my patchseries for adding clockgating support for kepler1 and 2 on nouveau. The first version of this series can be found here: https://patchwork.freedesktop.org/series/36504/ Some minor changes: - Clarified that SLCG stands for 'secondary level clockgating', thanks for the small tip nvidia! - Removed the concept of levels, this was more useful for debugging then

Next version of my patchseries for adding clockgating support for kepler1 and 2 on nouveau. The first version of this series can be found here: https://patchwork.freedesktop.org/series/36504/ One small change: - Add Martin's R-B, whoops Lyude Paul (5): drm/nouveau: Add support for basic clockgating on Kepler1 drm/nouveau: Add support for BLCG on Kepler1 drm/nouveau: Add support for

Next version of my patchseries for adding clockgating support for kepler1 and 2 on nouveau. The first version of this series can be found here: https://patchwork.freedesktop.org/series/36504/ Some small changes (shouldn't change anything functionally): - Made gf100_therm_new, gk104_clkgate_pack, and gk110_fb_clkgate_blcg_init_unk_0 static (re: kbuild test bot) - Making all three of

It's here! After a lot of investigation, rewrites, and traces, I present the patch series to implement all known levels of clockgating for Kepler1 and Kepler2 GPUs. Starting with Fermi GPUs (this is probably present on earlier GPUs as well, but with a far less easy to manage interface), nvidia added two clockgating levels that are handled mostly in firmware (with the exception of course, of

This adds support for enabling automatic clockgating on nvidia GPUs for Kepler1. While this is not technically a clockgating level, it does enable clockgating using the clockgating values initially set by the vbios (which should be safe to use). This introduces two therm helpers for controlling basic clockgating: nvkm_therm_clkgate_enable() - enables clockgating through CG_CTRL, done after

This adds support for enabling automatic clockgating on nvidia GPUs for Kepler1. While this is not technically a clockgating level, it does enable clockgating using the clockgating values initially set by the vbios (which should be safe to use). This introduces two therm helpers for controlling basic clockgating: nvkm_therm_clkgate_enable() - enables clockgating through CG_CTRL, done after

This enables BLCG optimization for kepler1. When using clockgating, nvidia's firmware has a set of registers which are initially programmed by the vbios with various engine delays and other mysterious settings that are safe enough to bring up the GPU. However, the values used by the vbios are more power hungry then they need to be, so the nvidia driver writes it's own more optimized set of

This adds support for enabling automatic clockgating on nvidia GPUs for Kepler1, referred to as "CG" throughout the driver. This is one of two powersaving levels that Kepler1 supports. This introduces two therm helpers for controlling basic clockgating: nvkm_therm_clkgate_enable() - enables clockgating through CG_CTRL, done after initializing the GPU fully nvkm_therm_clkgate_fini() -

The temp_get() function currently returns negative error numbers or a temperature. However, the thermal sensors can (in theory) measure negative temperatures. Some implementations of temp_get() correctly clamp negative temperature readings to 0 so that users do not mistake them for errors, but some, like gp100_temp_get(), do not. Rather than relying on implementations remembering to clamp values,

On 2018-02-14 — 09:36, Ilia Mirkin wrote: > On Wed, Feb 14, 2018 at 9:35 AM, Ilia Mirkin <imirkin at alum.mit.edu> wrote: > > On Wed, Feb 14, 2018 at 9:29 AM, Meelis Roos <mroos at linux.ee> wrote: > >>> This is 4.16-rc1+todays git on a lowly P4 with NV5, worked fine in 4.15: > >> > >> NV5 in another PC (secondary card in x86-64) made the systrem

On Wed, Sep 16, 2020 at 10:01 PM Karol Herbst <kherbst at redhat.com> wrote: > > On Wed, Sep 16, 2020 at 9:47 PM Jeremy Cline <jcline at redhat.com> wrote: > > > > The temp_get() function currently returns negative error numbers or a > > temperature. However, the thermal sensors can (in theory) measure > > negative temperatures. Some implementations of

Commit d32656373857 ("drm/nouveau/therm/gp100: initial implementation of new gp1xx temperature sensor") added support for reading finer-grain temperatures, but continued to report temperatures in 1 degree Celsius increments via nvkm_therm_temp_get(). Rather than altering nvkm_therm_temp_get() to report finer-grain temperatures, which would be inconvenient for other users of the

On Wed, Feb 14, 2018 at 9:29 AM, Meelis Roos <mroos at linux.ee> wrote: >> This is 4.16-rc1+todays git on a lowly P4 with NV5, worked fine in 4.15: > > NV5 in another PC (secondary card in x86-64) made the systrem crash on > boot, in nvkm_therm_clkgate_fini. Mind booting with nouveau.debug=trace? That should hopefully tell us more exactly which thing is dying. If you have a

When a fan is controlled via linear fallback without cstate, we shouldn't stop polling. Otherwise it won't be adjusted again and keeps running at an initial crazy pace. Fixes: 800efb4c2857 ("drm/nouveau/drm/therm/fan: add a fallback if no fan control is specified in the vbios") Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1103356 Bugzilla:

On 14/09/2018 10:28, Ben Skeggs wrote: > On Wed, 12 Sep 2018 at 20:59, Takashi Iwai <tiwai at suse.de> wrote: >> >> When a fan is controlled via linear fallback without cstate, we >> shouldn't stop polling. Otherwise it won't be adjusted again and >> keeps running at an initial crazy pace. > Martin, > > Any thoughts on this? > > Ben. Wow,

We should simply return errors while the GPU is turned off, because the sensors aren't accessable and setting any kind of value doesn't make any sense. Fixes sensors values reported by "sensors" Before: nouveau-pci-0100 Adapter: PCI adapter GPU core: +0.60 V (min = +0.60 V, max = +1.20 V) temp1: -0.0°C (high = +95.0°C, hyst = +3.0°C) (crit

On 17/11/17 02:04, Karol Herbst wrote: > The current hwmon code doesn't check if the returned value was actually an > error. > > Since Kepler temperature sensors are able to report negative values. Those > negative values are not for error reporting, but rather when you buried > your GPU in snow somewhere in Antarctica and still want a valid > temperature to be reported