similar to: [PATCH 0/2] Enable changing PCIe link on G92

704a6c008b7942bb7f30bb43d2a6bcad7f543662 broke pci msi rearm for g92 GPUs. g92 needs the nv46_pci_msi_rearm, where g94+ gpus used nv40_pci_msi_rearm. Reported-by: Andrew Randrianasulu <randrianasulu at gmail.com> Signed-off-by: Karol Herbst <karolherbst at gmail.com> --- drm/nouveau/include/nvkm/subdev/pci.h | 1 + drm/nouveau/nvkm/engine/device/base.c | 20 +++++++-------

overall it is for the most part the same as my older version. I cleaned up some copyright things, so that it is more like the others. Also I moved the print about the max speed supported into preinit and did some other minor cleanups in the 3rd commit. Happy testing (and performance for prime offloading setups) Karol Herbst (9): pci: add gk104 variant pci: add gf106 variant pci: implement

this patch series implements PCIe speed changes for Tesla and newer. The Kepler and Fermi bits are tested on my cards at home. Karol Herbst (9): pci: add gk104 variant pci: add gf106 variant pci: implement generic code for PCIe speed change pci: implement pcie speed change for tesla pci: implement pcie speed change on Fermi pci: implement PCIe speed change for kepler+ bios/perf:

overall the same as the old stuff, but with better namings and tirivialy improved code here and there Karol Herbst (9): pci: add gk104 variant pci: add gf106 variant pci: implement generic code for PCIe speed change pci: implement pcie speed change for tesla pci: implement pcie speed change on Fermi pci: implement PCIe speed change for kepler+ bios/perf: parse the pci speed from the

This adds support for enabling automatic clockgating on nvidia GPUs for Fermi and later generations. This saves a little bit of power, bringing my fermi GPU's power consumption from ~28.3W on idle to ~27W, and my kepler's idle power consumption from ~23.6W to ~21.65W. Similar to how the nvidia driver seems to handle this, we enable clockgating for each engine that supports it after

On Wed, 2017-04-26 at 00:49 +0200, Karol Herbst wrote: > Hi Lyude, > > thanks for the great work. Just a view comments inline. > > 2017-04-25 20:38 GMT+02:00 Lyude <lyude at redhat.com>: > > This adds support for enabling automatic clockgating on nvidia GPUs > > for > > Fermi and later generations. This saves a little bit of power, > > bringing >

On Fri, Jan 26, 2018 at 4:35 AM, Lyude Paul <lyude at redhat.com> wrote: > This adds support for enabling automatic clockgating on nvidia GPUs for > Kepler1. While this is not technically a clockgating level, it does > enable clockgating using the clockgating values initially set by the > vbios (which should be safe to use). > > This introduces two therm helpers for

Next version of my patchseries for adding clockgating support for kepler1 and 2 on nouveau. The first version of this series can be found here: https://patchwork.freedesktop.org/series/36504/ Some minor changes: - Clarified that SLCG stands for 'secondary level clockgating', thanks for the small tip nvidia! - Removed the concept of levels, this was more useful for debugging then

It's here! After a lot of investigation, rewrites, and traces, I present the patch series to implement all known levels of clockgating for Kepler1 and Kepler2 GPUs. Starting with Fermi GPUs (this is probably present on earlier GPUs as well, but with a far less easy to manage interface), nvidia added two clockgating levels that are handled mostly in firmware (with the exception of course, of

Next version of my patchseries for adding clockgating support for kepler1 and 2 on nouveau. The first version of this series can be found here: https://patchwork.freedesktop.org/series/36504/ Some very important changes: - Fix gf100_clkgate_init() to actually write registers! This got broken in the last version by accident - Dump the register packs and the resulting register writes into

Next version of my patchseries for adding clockgating support for kepler1 and 2 on nouveau. The first version of this series can be found here: https://patchwork.freedesktop.org/series/36504/ One small change: - Set therm->clkgate_enabled to false until the last patch, where we introduce the NvPmEnableGating option Lyude Paul (5): drm/nouveau: Add support for basic clockgating on

Next version of my patchseries for adding clockgating support for kepler1 and 2 on nouveau. The first version of this series can be found here: https://patchwork.freedesktop.org/series/36504/ One small change: - Add Martin's R-B, whoops Lyude Paul (5): drm/nouveau: Add support for basic clockgating on Kepler1 drm/nouveau: Add support for BLCG on Kepler1 drm/nouveau: Add support for

Next version of my patchseries for adding clockgating support for kepler1 and 2 on nouveau. The first version of this series can be found here: https://patchwork.freedesktop.org/series/36504/ Some small changes (shouldn't change anything functionally): - Made gf100_therm_new, gk104_clkgate_pack, and gk110_fb_clkgate_blcg_init_unk_0 static (re: kbuild test bot) - Making all three of

before we can let nouveau fully reclock the gpu automatically, we should have a fail safe mechanism to prevent the card from overheating. Starting with G84 GPUs the so called FSRM does the job and automatically downclocks the GPU when specific temperatures thresholds are hit. Lucky for us the needed bits are already configured through a script inside the vbios at POST time and we only need to

I've splitted my big series between the part which actually fixes the engine reclocking bits and the part handling voltage/clock updates on temperature change, so that the more reviewed parts can be merged in faster. This series fixes a lot of Engine reclocking issues found on Fermi, Kepler and all Maxwell generation GPUs. It does _not_ fix memory reclocking on Fermi. It mostly contains of

We are slowly getting there! v4 of the series with some realy good improvements, so I am sure this is like 95% done and only needs some proper polishing and proper Reviews! I also added the NvVoltOffsetmV module parameter, so that a user is able to over and !under!-volt the GPU. Overvolting makes sense, when there are still some reclocking issues left, which might be solved by a higher voltage.

GF117 appears to use the same register as GK104 (but still with the general Fermi readout mechanism). Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108980 Signed-off-by: Ilia Mirkin <imirkin at alum.mit.edu> --- v1 -> v2: split out different regid into separate file. .../drm/nouveau/include/nvkm/subdev/volt.h | 1 + .../gpu/drm/nouveau/nvkm/engine/device/base.c | 2 +-

This adds support for enabling automatic clockgating on nvidia GPUs for Fermi and later generations. This saves a little bit of power, bringing my fermi GPU's power consumption from ~28.3W on idle to ~27W, and my kepler's idle power consumption from ~23.6W to ~21.65W. Similar to how the nvidia driver seems to handle this, we enable clockgating for each engine that supports it after

Hi Lyude, thanks for the great work. Just a view comments inline. 2017-04-25 20:38 GMT+02:00 Lyude <lyude at redhat.com>: > This adds support for enabling automatic clockgating on nvidia GPUs for > Fermi and later generations. This saves a little bit of power, bringing > my fermi GPU's power consumption from ~28.3W on idle to ~27W, and my > kepler's idle power

This adds support for enabling automatic clockgating on nvidia GPUs for Kepler1. While this is not technically a clockgating level, it does enable clockgating using the clockgating values initially set by the vbios (which should be safe to use). This introduces two therm helpers for controlling basic clockgating: nvkm_therm_clkgate_enable() - enables clockgating through CG_CTRL, done after