similar to: [Radeon] PA-RISC (hppa) video cards init failure loading the device driver kernel module

Not sure about the radeon issue, but "DRM: GPU lockup - switching to software fbcon" basically means "the CPU isn't able to submit commands, or the GPU isn't executing the commands". Basically the GPU can only have so many commands outstanding [well, command buffers], and we hit that limit. >From what I understand, PA-RISC has a "funny" architecture that

Dear Ilia, this page summarize all the possible options of the "nouveau" kernel module: https://nouveau.freedesktop.org/wiki/KernelModuleParameters/ I will test the options that you have suggested as soon as possible. Try a PCI video card is a very good advice because the AGP/FX1(chipset) is on the top of the "usual suspects" list; unfortunately the c8000 has 3.3 PCI slots

Dear "nouveau" developers, I know that many very competent guys have already spent a lot of time and efforts on this issue without success. I have started to play with "hppa" two weeks ago and, with the support of the linux-parisc mailing list people, now I have a - almost fully - working workstation (hp c8000). Everythings work perfectly BUT the video card. No matter the

Hello, since few weeks i have problems with the command: doveadm expunge -A mailbox Trash savedbefore 7d => kernel: doveadm[11609]: segfault at 10 ip b75f146a sp bf856ad0 error 4 in libdovecot.so.0.0.0[b7585000+c8000] but for a single user it's works fine: doveadm expunge -u test at vtlx.de mailbox Trash savedbefore 30h I hope there is a solution for this. with regards Mario --

Right now I'm building a 2.4.17 kernel on an HPPA Linux system. The kernel it ships with supports ext2 only. Has anybody tried ext3 on HPPA? -- Ralf Hildebrandt (Im Auftrag des Referat V A) Ralf.Hildebrandt@charite.de Charite Campus Virchow-Klinikum Tel. +49 (0)30-450 570-155 Referat V A - Kommunikationsnetze - Fax. +49 (0)30-450 570-916 "A man who

--- src/kernel.ml | 2 ++ src/utils.ml | 2 ++ 2 files changed, 4 insertions(+) diff --git a/src/kernel.ml b/src/kernel.ml index 356ac4b..9b0e8a2 100644 --- a/src/kernel.ml +++ b/src/kernel.ml @@ -30,6 +30,8 @@ let patt_of_cpu host_cpu = | "ppc" | "powerpc" | "powerpc64" -> ["ppc"; "powerpc"; "powerpc64"] |

Hi, no mailing list for powerpcspe? What?s the progress of your architectures? I don?t see much happening on debian-ports.org, and taking your architectures off that infrastructure hurts others (I?ve ?revived? m68k and kept it running on d-p.o which helps a bit). Anyway: a new klibc (2.0~rc5-1) has been uploaded, and an mksh companion version (40.9.20120518-1) depending on it and trying to use

It looks like libplugin_common.a is being linked into the shared object libxmms-flac.so. In that case, all of the objects in libplugin_common.a must be compiled with -fPIC. ----- Forwarded message from lamont+buildd@hp.com ----- Date: Sat, 28 Sep 2002 18:54:08 -0600 From: lamont+buildd@hp.com Resent-From: lamont+buildd@hp.com To: submit@bugs.debian.org Subject: Bug#162718:

Hi All, We just bought a sip based PA setup here with the intention of hooking it into our existing asterisk (1.4) setup. It works as expected when I dial it's extension, but I want to have system generated speech played based on some action (using cepstral, which is already installed and working). My first thought was to DIAL to the extension, and then have cepstral play the audio. The

bcbride bette-ann cgnlhm Am..eri`ca me__di_~cine & f^ast shi-pping M W http://fvb.hmi.sonorant463pills.us/f74/ I got an engagement ring for Christmas. My boyfriend and I had been dating for almost a year and both felt the time was right to join our lives together in holy matrimony. An American man with silver-grey hair,baseball cap and a strong handshake is saying,'Hi,I'm

hi, I have a problem in the gssapi patch. I have applied the gssapi patch for 3.4 version on OpenSSH-3.5 and built the source on HP-UX 11.11 (32 bit hardware). When I run ssh using the "-l" option such as "ssh -l <username> <hostname>", I am getting a SIGBUS error. That is the function "gss_release_buffer()" is causing this error. Any views on this?

/SNIP/ I cannot for the life of me get it to register with the asterisk server, nor upgrade the firmware to the latest (1.41) i'm still using 1.37. /SNIP/ You will never be able to upload the firmware - as long as you try to upload the firmware in 'debug' mode. This is the safe process to make sure thhat your firmware is not bad. Here is the way to upload the firmware coirrectly:

Hi: We were wondering if SAMBA can be used to make a windows share look like a UNIX filesystem to the UNIX server? I know it works in reversre. Just checking to see if there were new functionality I was not privy to. Joe Imbimbo Oracle Lead DBA Hudson Global Resources 412-517-7732, x150 412-512-0507 (cell) ****This e-mail is sent by Hudson Highland Group, Inc., or one of its subsidiaries,

Job Description: Stevens Capital Management LP ("SCM") is a registered investment adviser that manages a multi-billion dollar hedge fund that has been in business for 20+ years. SCM specializes in the rigorous development and disciplined implementation of empirically based quantitative trading strategies. Our highly productive team works in a fast-paced collegial environment,

Stevens Capital Management LP ("SCM") is a registered investment adviser that manages a multi-billion dollar hedge fund that has been in business for 20+ years. SCM specializes in the rigorous development and disciplined implementation of empirically based quantitative trading strategies. Our highly productive team works in a fast-paced collegial environment, utilizing extensive data

I need to be able to connect an old PA system to an asterisk box, which basically works as a couple of amplifiers taking an analogue phone signal and playing whatever it produces out of some speakers. There is no on-hook state in the whole setup. Obviously If I just connect the input to a port on an ATA, I'll just get a dialtone played through the speakers. Can anyone think of a way I can

Perhaps this question has been asked before: but using the function predict( fit,type="terms",se.fit=T), where fit is a coxph object in S-plus, the estimated standard errors are different. It may be different estimators of the variance of the residuals? Which one is the default in R, I don't find that too easily in the documentation. Does anybody know? I'll be very grateful

Hi, Some users can't logon to their workstation if the session is negotiating with samba domain controller, the password is requested again and again. Samba is joined as a Domain Controller in a windows domain controllers. The users' s computers are joined also to the domain. But for some users the kerberos ticket is failing. Samba version 4.1.15 - Debian 7.8 Samba debug logs, level 3:

Greetings, I just received some netweb-301 phones frm Seshu down in NJ. I cannot for the life of me get it to register with the asterisk server, nor upgrade the firmware to the latest (1.41) i'm still using 1.37. The packets are traversing the router, going into the other subnet, hitting the asterisk box, but not actually making it to asterisk. Nothing in the asterisk logs, but tcpdump

Claus-Juergen Neumann/BASF-AG/B ASF An r-help at r-project.org 23.09.2008 12:49 Kopie