similar to: [REGRESSION] nouveau: 30 second boot hang after commit 2b700825e

Hi, It would seem like it (attachments are from 4.9-rc1, btw), but it doesn't look like there is any support in the Xorg driver. How can I help with that? Best regards, Sune Mølgaard Translucent ApS On 2016-04-22 09:33, Pierre Moreau wrote: > Hello, > > A patch was merged yesterday to recognise GM108 (see >

Hi again, It works :-) Reclocking, however, is another kettle of fish. Trying #echo 0f > /sys/kernel/debug/dri/0/pstate hangs X. Trying the same with no X running reveals: Dec 7 10:08:42 dell-smo kernel: [ 728.831020] nouveau 0000:08:00.0: clk: unable to find matching pll values a number of time as then soft lockup. Very much akin to

Hi, With drm-next from http://kernel.ubuntu.com/~kernel-ppa/mainline/drm-next/2016-12-08/ I don't get the error messages, but I still get a soft cpu lockup. What info would you need from me to get it working? Best regards, Sune Mølgaard On 2016-12-08 08:10, Karol Herbst wrote: > hi, > > give the drm-next kernel tree a try. Sadly the reclocking improvements didn't land with

Aha! That seems to do it. If I interpret correctly, it doesn't set it quite to full power, though, but it's certainly an improvement: 07: core 405 MHz memory 810 MHz 0a: core 270-1124 MHz memory 1600 MHz 0f: core 270-1124 MHz memory 2002 MHz AC DC * AC: core 1012 MHz memory 2002 MHz A short run of glmark2 shows aver 100% improvement to ~550 FPS. Interestingly, it's still nowhere

http://bugs.freedesktop.org/show_bug.cgi?id=26980 Summary: GT230M/nouveau: X server hangs spontaneously Product: xorg Version: 7.5 Platform: x86-64 (AMD64) OS/Version: Linux (All) Status: NEW Severity: normal Priority: medium Component: Driver/nouveau AssignedTo: nouveau at lists.freedesktop.org

I am doing a large and long transfer and twice now i have gotten this error killing the transfer, anyone know what/how i can fix this? root@denali [/etc/rsync]# Received disconnect from 66.160.191.130: 2: Corrupted MAC on input. rsync: writefd_unbuffered failed to write 4 bytes: phase "unknown" [sender]: Broken pipe (32) rsync: connection unexpectedly closed (1055144 bytes received so

Package: xen-utils-3.4 Version: 3.4.0-0~ct Severity: important After installation of linux 2.6.26-2-xen-686 and xen-utils-3.4 the 2 onboard NICs 82574L (driver e1000e) are not working. ping results always in unreachable hostname ethtool seems fine for the eth's mii-tool has no transceiver for the eth's ip link show shows an UNKNOWN state for the eth's With linux 2.6.26-2-xen-686 and

in dom0, how does one get and set the link information for a NIC? In a non-xen kernel, we could get this info by simply running: # ethtool eth0 Settings for eth0: Supported ports: [ TP MII ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Supports auto-negotiation: Yes Advertised link modes:

My system is: Intel CC820 motherboard (which supports PME# wake up for wake on LAN) 3com 3C905C which also supports wake on LAN via PME# Linux 5.5 The motherboard BIOS is later than one that reports an issue with WOL and this particular network card was fixed. But when I turn off the PC (shutdown or poweroff commands or front panel button), it cannot be restarted via WOL. The network light on

CentOS 6.2......... Why do the physical interfaces report (correctly) that they're negotiated at 1000Mb/s, but when I `cat /proc/net/bonding/bond0` I get 100Mbps for the member interfaces, and when I ` mii-tool bond0` I get 10Mbps for the bond? ----------------------------------------------------------------------------------------- ethtool em1 Settings for em1: Supported ports: [

https://bugs.freedesktop.org/show_bug.cgi?id=100567 Bug ID: 100567 Summary: Nouveau system freeze fifo: SCHED_ERROR 0a [CTXSW_TIMEOUT] Product: xorg Version: unspecified Hardware: Other OS: All Status: NEW Severity: normal Priority: medium Component: Driver/nouveau

We have an HP DL360 server with dual on-board Tigon3 ethernet cards. We are using eth0, eth1 is unused at the moment. Sometimes when the network interface is under heavy load, for example moving large file transfers over rsync or NFS, the network interface stops working and we lose all connection to the server. The only solution at this point is to jump on the console and restart the network

On Mon, Nov 12, 2018 at 04:07:47PM -0800, Gordon Messmer wrote: > On 11/11/18 4:31 PM, Fred Smith wrote: > >Can any of you remind me how to find out the Synaptics model it is, > >and/or figure out if it would be expected (or not) to support two- > >finger scrolling? > > Start with: > > ?dmesg | egrep -i 'input:|mouse|synapt' looking in dmesg output for

I want to check the speed like features of my Ethernet in dom0 and domUs. But in virtualized environment it gives strange output why is that so? how to check it otherwise? Non-virtualized FC11 [root@fasiha home]# ethtool eth0 Settings for eth0:     Supported ports: [ TP ]     Supported link modes:   10baseT/Half 10baseT/Full                             100baseT/Half 100baseT/Full    

I want to check the speed like features of my Ethernet in dom0 and domUs. But in virtualized environment it gives strange output why is that so? how to check it otherwise? Non-virtualized FC11 [root@fasiha home]# ethtool eth0 Settings for eth0:     Supported ports: [ TP ]     Supported link modes:   10baseT/Half 10baseT/Full                             100baseT/Half 100baseT/Full    

I''m trying to build out a test cloud using XCP 1.0.0 beta with 3 machines of 18 cores total (Phenom II 1090s). I''ve built three machines, installed XCP 1.0.0 beta on them and they all three have the same problem - the Realtek network cards don''t work. The following is the output from lspci 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI

Hello everyone: Over the past few years I have been a happy samba user, running samba on Redhat / FC platforms. Recently I upgraded hardware, and Samba hasn't been performing well at all.. which makes me sad :-( The new hardware is Asus P5B board with a dual-core intel processor. This board has an onboard Realtek RTL8111/8168B gigabit ethernet controller, which was a hassle to setup.

I have the xensource 3.1.0 x86_64 tarball installed over a RHEL5 clone distribution. The "ethtool" utility only returns the following information: [root@fermigrid5 etc]# ethtool eth0 Settings for eth0: Link detected: yes [root@fermigrid5 etc]# Since I have no vanilla-installed rhel5 machines with which to compare, I am not sure if I am dealing with a bug in the ethtool (whose

----- Forwarded Message ----- From: "Andrew Holway" <a.holway at syseleven.de> To: "Alex Jia" <ajia at redhat.com> Cc: kvm at vger.kernel.org Sent: Friday, August 17, 2012 4:24:33 PM Subject: Re: [libvirt-users] vm pxe fail Hello, On Aug 17, 2012, at 4:34 AM, Alex Jia wrote: > Hi Andrew, > I can't confirm a root reason based on your information, perhaps

Hello, Just did a fresh install of xen-4.0 and using the 2.6.31.13 dom0 kernel. I have 6 linux debian guests running, and on my host console i am getting these errors rolling pretty constantly. "Attempting to checksum a non-TCP/UDP packet, dropping a protocol 1 packet" I tried doing the ethtool -K eth0 tx off and same thing on peth0, using bridged mode for network config. Any tips?