similar to: [PATCH] device: call nvkm_device_fini if nvkm_device_init fails

Should these get back-ported to any released kernels? On Mon, Jan 25, 2016 at 4:44 AM, Alexandre Courbot <acourbot at nvidia.com> wrote: > nvkm_device_fini is never called if a failure occurs in > nvkm_device_init, even when unloading the module. This can lead to a > resources leak (one example is the Tegra interrupt which would never be > freed in that case). Fix this by

Am Montag, den 25.01.2016, 18:44 +0900 schrieb Alexandre Courbot: > nvkm_device_tegra_new initializes the irq member of the Tegra device > to -1 in order to signal that it is uninitialized. However, > nvkm_device_tegra_fini tests it against 0 to check whether an IRQ has > been allocated or not. This leads to free_irq being called on -1 > during > device initialization. > The

Changes since last sent: * add a patch to set the device into DRM_SWITCH_POWER_CHANGING state (can be dropped actually, I thought I was needing it, came up with a different approach and forgot to delete it, doesn't hurt though) * expose information about runtime suspending to nvkm so that we can run the pcie workaround only on runtime suspend Karol Herbst (8): pci: disable ASPM

From: Thierry Reding <treding at nvidia.com> The nouveau_fence_get_get_driver_name() function has a redundant _get in its name. Remove it. Signed-off-by: Thierry Reding <treding at nvidia.com> --- drivers/gpu/drm/nouveau/nouveau_fence.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_fence.c

These 4 patches fix two issues that existed on Tegra regarding DMA: 1) The bit indicating whether to use an IOMMU or not was hardcoded ; make this a platform property and use it in instmem 2) The DMA mask was not set for platform devices. Fix this by converting more pci_dma* to the DMA API, and use that more generic code to set the DMA mask properly for all platforms. Tested on both x86

On Tegra186, powergating is handled by the BPMP power domain provider and the "legacy" powergating API is not available. Therefore skip these calls if we are attached to a power domain. Signed-off-by: Mikko Perttunen <mperttunen at nvidia.com> --- drivers/gpu/drm/nouveau/nvkm/engine/device/tegra.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git

From: Thierry Reding <treding at nvidia.com> Hi, the GPU on Jetson TX2 (GP10B) does not work properly on all devices. Why exactly is not clear, but there are slight differences between the SKUs that were tested. It turns out that the biggest issue is that on some devices (e.g. the one that I have), pulsing the GPU reset twice as is done in the current code (once as part of the power-ungate

Hi Thierry, On 16/09/2019 16:04, Thierry Reding wrote: > From: Thierry Reding <treding at nvidia.com> > > If the GPU is already attached to an IOMMU, don't detach it and setup an > explicit IOMMU domain. Since Nouveau can now properly handle the case of > the DMA API being backed by an IOMMU, just continue using the DMA API. > > Signed-off-by: Thierry Reding

nvkm_device_tegra_new initializes the irq member of the Tegra device to -1 in order to signal that it is uninitialized. However, nvkm_device_tegra_fini tests it against 0 to check whether an IRQ has been allocated or not. This leads to free_irq being called on -1 during device initialization. Signed-off-by: Alexandre Courbot <acourbot at nvidia.com> ---

From: Thierry Reding <treding at nvidia.com> An unfortunate interaction between the 32-bit ARM DMA/IOMMU mapping code and Tegra SMMU driver changes to support IOMMU groups introduced a boot- time regression on Tegra124. This was caught very late because none of the standard configurations that are tested on Tegra enable the ARM DMA/ IOMMU mapping code since it is not needed. The reason for

With linux-next-2017-12-14, I get a crash when nouveau is loaded by systemd-udevd. [ 12.050625] Unable to handle kernel NULL pointer dereference at virtual address 00000058 [ 12.050627] Mem abort info: [ 12.050628] ESR = 0x96000004 [ 12.050630] Exception class = DABT (current EL), IL = 32 bits [ 12.050631] SET = 0, FnV = 0 [ 12.050632] EA = 0, S1PTW = 0 [ 12.050633] Data

On 16/09/2019 16:57, Thierry Reding wrote: > On Mon, Sep 16, 2019 at 04:29:18PM +0100, Robin Murphy wrote: >> Hi Thierry, >> >> On 16/09/2019 16:04, Thierry Reding wrote: >>> From: Thierry Reding <treding at nvidia.com> >>> >>> If the GPU is already attached to an IOMMU, don't detach it and setup an >>> explicit IOMMU domain. Since

This is 4.16-rc1+todays git ona lowly P4 with NV5, worked fine in 4.15: [ 7.361155] nouveau 0000:01:00.0: NVIDIA NV05 (20154000) [ 7.386601] nouveau 0000:01:00.0: bios: version 02.05.19.03.00 [ 7.386715] nouveau 0000:01:00.0: bios: DCB table not found [ 7.386983] nouveau 0000:01:00.0: bios: DCB table not found [ 7.387166] nouveau 0000:01:00.0: bios: DCB table not found [

From: Thierry Reding <treding at nvidia.com> Depending on the kernel configuration, early ARM architecture setup code may have attached the GPU to a DMA/IOMMU mapping that transparently uses the IOMMU to back the DMA API. Tegra requires special handling for IOMMU backed buffers (a special bit in the GPU's MMU page tables indicates the memory path to take: via the SMMU or directly to the

From: Thierry Reding <treding at nvidia.com> An unfortunate interaction between the 32-bit ARM DMA/IOMMU mapping code and Tegra SMMU driver changes to support IOMMU groups introduced a boot- time regression on Tegra124. This was caught very late because none of the standard configurations that are tested on Tegra enable the ARM DMA/ IOMMU mapping code since it is not needed. The reason for

Hello, There is a trouble on ARM with DMA allocations made by device drivers, the trouble is that DMA allocations are getting implicitly backed with IOMMU mapping by the driver core if IOMMU presents in a system and IOMMU could handle device. This is an undesired behaviour for drivers that manage IOMMU by themselves, like NVIDIA Tegra GPU driver. On arm32 the implicit backing happens if

From: Thierry Reding <treding at nvidia.com> Hi Ben, here's a revised subset of the patches I had sent out a couple of weeks ago. I've reworked the BAR2 accesses in the way that you had suggested, which at least for GP10B turned out to be fairly trivial to do. I have not looked in detail at this for GV11B yet, but a cursory look showed that BAR2 is accessed in more places, so the

From: Thierry Reding <treding at nvidia.com> Hi Ben, here's a revised subset of the patches I had sent out a couple of weeks ago. I've reworked the BAR2 accesses in the way that you had suggested, which at least for GP10B turned out to be fairly trivial to do. I have not looked in detail at this for GV11B yet, but a cursory look showed that BAR2 is accessed in more places, so the

On 30/05/18 09:03, Thierry Reding wrote: > From: Thierry Reding <treding at nvidia.com> > > Depending on the kernel configuration, early ARM architecture setup code > may have attached the GPU to a DMA/IOMMU mapping that transparently uses > the IOMMU to back the DMA API. Tegra requires special handling for IOMMU > backed buffers (a special bit in the GPU's MMU page

This series adds support for GM20B PLL's Maxwell features, namely glitchless switch and (more importantly) DFS support. DFS lets the PLL lower its output speed according to input current variations, making the clock more stable and allowing it to run safely at lower voltage. All GM20B additions are done in the last patch, which consequently ends up being considerably big ; fortunately, it