similar to: [PATCH 0/2] drm/nouveau: add support for 2560x1440@56 over HDMI

These patches are adding support for outputting 2560x1440 at 56 over HDMI. This needs a pixel clock of 225 MHz which was not supported before. This was tested in a dual monitor setup with a GF114 (GTX 560 TI) and one HDMI monitor running with 2560x1440 at 56 and one DVI monitor running with 1920x1200 at 60. This still needs testing on other graphics cards and with dual link DVI. There is no

From: Hauke Mehrtens <hauke at hauke-m.de> Without this patch a pixel clock rate above 165 MHz on a TMDS link is assumed to be dual link. This is true for DVI, but not for HDMI. HDMI supports no dual link, but it supports pixel clock rates above 165 MHz. Only activate Dual Link mode when it is actual possible. Signed-off-by: Hauke Mehrtens <hauke at hauke-m.de> Signed-off-by: Ilia

On Tue, Nov 3, 2015 at 7:02 PM, Ben Skeggs <skeggsb at gmail.com> wrote: > On 11/04/2015 08:41 AM, Ilia Mirkin wrote: >> From: Hauke Mehrtens <hauke at hauke-m.de> >> >> Without this patch a pixel clock rate above 165 MHz on a TMDS link is >> assumed to be dual link. This is true for DVI, but not for HDMI. HDMI >> supports no dual link, but it supports

From: Hauke Mehrtens <hauke at hauke-m.de> Without this patch a pixel clock rate above 165 MHz on a TMDS link is assumed to be dual link. This is true for DVI, but not for HDMI. HDMI supports no dual link, but it supports pixel clock rates above 165 MHz. Only activate Dual Link mode when it is actually possible and requested. Signed-off-by: Hauke Mehrtens <hauke at hauke-m.de>

From: Hauke Mehrtens <hauke at hauke-m.de> Without this patch a pixel clock rate above 165 MHz on a TMDS link is assumed to be dual link. This is true for DVI, but not for HDMI. HDMI supports no dual link, but it supports pixel clock rates above 165 MHz. Only activate Dual Link mode when it is actually possible and requested. Signed-off-by: Hauke Mehrtens <hauke at hauke-m.de>

On 11/04/2015 08:41 AM, Ilia Mirkin wrote: > From: Hauke Mehrtens <hauke at hauke-m.de> > > Without this patch a pixel clock rate above 165 MHz on a TMDS link is > assumed to be dual link. This is true for DVI, but not for HDMI. HDMI > supports no dual link, but it supports pixel clock rates above 165 MHz. > Only activate Dual Link mode when it is actual possible. >

Hi, Distribution: openSUSE 42.2 Beta, Kernel: 4.4. The box is a Dell Precision T7500 with an nVidia Quadro 4000 card and a displayport connected iiyama B2783QSU 2560x1440 monitor identified as DP-1. Problem: The monitor is detected as 1920x1080 and not 2560x1440. See Xorg log file at http://rogerprice.org/Xorg.0.log . There is no file /etc/X11/xorg.conf and in the directory

On Mon, Nov 24, 2014 at 8:33 PM, Andy Ritger <aritger at nvidia.com> wrote: > On Fri, Nov 21, 2014 at 01:39:55AM -0500, Ilia Mirkin wrote: >> On Fri, Nov 21, 2014 at 1:16 AM, Andy Ritger <aritger at nvidia.com> wrote: >> > Hi Ilia, >> > >> > Actually 0x90b8 is different than copy engine. I'm not very familiar >> > with it, but 0x90b8 is

Prefer the parsed results for is_hdmi and has_audio in display info over calling drm_detect_hdmi_monitor() and drm_detect_monitor_audio(), respectively. Conveniently, this also removes the need to use edid_blob_ptr. Cc: Karol Herbst <kherbst at redhat.com> Cc: Lyude Paul <lyude at redhat.com> Cc: Danilo Krummrich <dakr at redhat.com> Cc: nouveau at lists.freedesktop.org

On Fri, Nov 21, 2014 at 1:16 AM, Andy Ritger <aritger at nvidia.com> wrote: > Hi Ilia, > > Actually 0x90b8 is different than copy engine. I'm not very familiar > with it, but 0x90b8 is an engine for performing LZO decompression as > part of performing the copy. It has a variety of limitations (e.g., > cannot handle blocklinear format), and was only in a few Fermi

On 25/11/14 22:05, Andy Ritger wrote: > On Tue, Nov 25, 2014 at 10:57:44AM -0500, Ilia Mirkin wrote: >> On Mon, Nov 24, 2014 at 8:33 PM, Andy Ritger <aritger at nvidia.com> wrote: >>> On Fri, Nov 21, 2014 at 01:39:55AM -0500, Ilia Mirkin wrote: >>>> On Fri, Nov 21, 2014 at 1:16 AM, Andy Ritger <aritger at nvidia.com> wrote: >>>>> Hi Ilia,

- Use driver level (0x2) for NV_DEBUG instead of all levels - Create a NV_DEBUG_KMS for KMS level (04) and use them in modesetting code - Remove a few odd NV_TRACE calls and replace with NV_DEBUG_KMS Signed-off-by: Maarten Maathuis <madman2003 at gmail.com> --- drivers/gpu/drm/nouveau/nouveau_bios.c | 12 +++++----- drivers/gpu/drm/nouveau/nouveau_connector.c | 8 +++---

On Fri, Jan 12, 2024 at 11:50?AM Jani Nikula <jani.nikula at intel.com> wrote: > > Prefer the parsed results for is_hdmi and has_audio in display info over > calling drm_detect_hdmi_monitor() and drm_detect_monitor_audio(), > respectively. > > Conveniently, this also removes the need to use edid_blob_ptr. > > Cc: Karol Herbst <kherbst at redhat.com> > Cc:

--- man/nouveau.man | 9 ++++++++- src/nv_driver.c | 8 ++++++-- 2 files changed, 14 insertions(+), 3 deletions(-) diff --git a/man/nouveau.man b/man/nouveau.man index 07d53c8..4878f24 100644 --- a/man/nouveau.man +++ b/man/nouveau.man @@ -63,7 +63,14 @@ GF100, GF104, GF106, GF108, GF110, GF114, GF116, GF117, GF119 GK104, GK106, GK107, GK110, GK208 .TP 22 .B GeForce GTX 750 -GM107 +GM107,

Due to popular demand, I have finally found time to write this up. I had to rush it a little, but hopefully you get the gist. http://www.altechnative.net/2013/11/25/virtualized-gaming-nvidia-cards-part-3-how-to-modify-a-fermi-based-geforce-into-a-quadro-geforce-gts450gtx470gtx480-to-quadro-200050006000/ Any questions, please ask away, and I''ll update the article to expand on those

Hi, Here is my patch queue I accumulated over quite a long time. Patches 1-6 are bugfixes, and rest is mostly RFC. Comments are welcome. Best regards, Maxim Levitsky

THIS IS UNTESTED for anything other than i915. Use previously parsed EDID where possible for display audio/hdmi detection. This in turn reduces edid_blob_ptr usage in a number of places. Further reduce edid_blob_ptr usage, and document that it should not be used by drivers directly. BR, Jani. Cc: Alain Volmat <alain.volmat at foss.st.com> Cc: Alex Deucher <alexander.deucher at

We want to be able to guarantee the location of the allocated buffer object if we're going to be able to reliably allocate the existing framebuffer at startup. Add an argument to do so and pass that through to the ttm core. Signed-off-by: Matthew Garrett <mjg at redhat.com> --- drivers/bcma/main.c | 1 - drivers/gpu/drm/nouveau/nouveau_bo.c | 8 +++++++-

some chipset have working engine reclocking, but broken memory reclocking like Fermi. We should for now, add the functionality to allow partly reclocking for those. Allthough this doesn't give as much performance as one might wish, it is till noticeable and may improve performance enough to be noted. Karol Herbst (2): clk: seperate engine and memory reclock toggles clk: allow engine

NVIDIA provided the documentation for mp error 0x10, INVALID_ADDR_SPACE, which apparently happens when trying to use an atomic operation on local or shared memory (instead of global memory). Signed-off-by: Ilia Mirkin <imirkin at alum.mit.edu> --- drm/nouveau/nvkm/engine/gr/gf100.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drm/nouveau/nvkm/engine/gr/gf100.c