similar to: Bug#776742: xen-utils-common: no support for VGA Passthrough

Package: xen-utils-common Version: 4.4.1-6 Severity: normal Dear Maintainer, (There appear to be several reports on the BTS with concerns relating to this report. Some unarchiving/merging may be necessary. Reassignment may be needed as well since I'm not sure which package this problem would fall under. Ultimately decided to file with xen-utils-common with 'xl' being the frontend

Hi! On 10/19/21 5:44 AM, Chuck Zmudzinski wrote: > On 5/10/2021 1:33 PM, Chuck Zmudzinski wrote: >> [...] with buster and bullseye running as the Dom0, I can only get the VGA/Passthrough feature to work with Windows Xen HVMs. I would expect both Windows and Linux HVMs to work comparably well. You don't mention the used Xen version (Debian package version) for buster and bullseye

On 5/10/2021 1:33 PM, Chuck Zmudzinski wrote: > Package: src:linux > Version: 5.10.28-1 > Severity: normal > Tags: upstream > > Dear Maintainer, > > I have been using Xen's PCI and VGA passthrough feature since wheezy and jessie were the stable versions, and back then both Windows HVMs and Linux HVMs would function with the Intel Integrated Graphics Device (IGD), the

Hi, How come gfx_passthru is now an invalid option? Does it mean Xen-unstable 4.4 changeset 27214 no longer supports vga passthrough? -- Yours sincerely, Singapore Citizen Mr. Teo En Ming (Zhang Enming)

Hi, How come gfx_passthru is now an invalid option? Does it mean Xen-unstable 4.4 changeset 27214 no longer supports vga passthrough? -- Yours sincerely, Singapore Citizen Mr. Teo En Ming (Zhang Enming)

This patch set mainly allows the user to build a seabios or rombios only version of hvmloader. In addition, when building a seabios only hvmloader, Option ROMs like vgabios and etherboot are no longer required, and therefore can be disabled from the build. Dependency on the bcc compiler can also be avoided the same way. v2: Separate patches for separate issues Introduced config option to

Hi, My Windows 8 Enterprise HVM domU configuration is as follows. I have to *disable* gfx_passthru, that is, gfx_passthru=0. Please take note. # XL domain configuration file for Windows 8 64-bit English HVM domU # Please refer to "man xl.cfg" for further explanations. # See also docs/misc/xl-network-configuration.markdown and # docs/misc/xl-disk-configuration.txt # Written by Teo En

Hi, My Windows 8 Enterprise HVM domU configuration is as follows. I have to *disable* gfx_passthru, that is, gfx_passthru=0. Please take note. # XL domain configuration file for Windows 8 64-bit English HVM domU # Please refer to "man xl.cfg" for further explanations. # See also docs/misc/xl-network-configuration.markdown and # docs/misc/xl-disk-configuration.txt # Written by Teo En

On 10/23/2021 11:11 AM, Hans van Kranenburg wrote: > Hi! > > On 10/19/21 5:44 AM, Chuck Zmudzinski wrote: >> On 5/10/2021 1:33 PM, Chuck Zmudzinski wrote: >>> [...] with buster and bullseye running as the Dom0, I can only get the VGA/Passthrough feature to work with Windows Xen HVMs. I would expect both Windows and Linux HVMs to work comparably well. > You don't

Hi all I''m trying to enable VGA passthrough in linux domU without success. I want to pass through AMD Radeon HD 4850 - 03:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV770 [Radeon HD 4850] as a _primary_ VGA for the VM. Nothing is showing up on the monitor that I have connected to graphics card''s HDMI port. I have IOMMU enabled. I searched mailing lists

Gordan & David, Read about your latest work, and was thrilled to learn that both soft and hard mods are working. I bought the GTX 670 model in David''s article, I will be giving this a shot in a week. I was hoping to ask a few questions. 1. Is there a specific qemu version required (traditional or the new default)? 2. What (if anything) should be done after removing the resistors

This patch supports basic gfx passthrough on QEMU: - disable emulated VGA adpater if there is passthroughed gfx - register/unregister legacy VGA I/O ports and MMIOs for passthroughed gfx Signed-off-by: Ben Lin <ben.y.lin@intel.com> Signed-off-by: Weidong Han <weidong.han@intel.com> _______________________________________________ Xen-devel mailing list

Hi all, I have an i7-3770 which has the Intel HD 4000 graphics. I''ve been trying to pass it through to DomU with no success. With a Linux DomU, the i915 module simply will not load because intel_agp is not loaded properly when it cannot find the AGP bridge. ( With a Win7 DomU, it BSODs straight away during the boot with SYSTEM_SERVICE_EXCEPTION. With a WinXP DomU, it got further

Hi everyone, after following in the footsteps of the following discussion (http://lists.xenproject.org/archives/html/xen-users/2013-09/msg00106.html) I had been able to turn my GTX 480 into a Quadro 6000. When I VT-d passthrough it to a Debian jessie VM it shows up fine and CUDA 5.5 seems to function properly up to a point: lspci -v: 00:04.0 VGA compatible controller: NVIDIA Corporation GF100GL

Hi Gordan, I wanted to let you know that today I decided to have a try for my GTX 680. Gigabite GTX 680 2048 MB GDDR5. I know that this particular card could be hard-moded to GRID K2 so VGA passthrough could work. Following instructions found on http://www.eevblog.com/forum/chat/hacking-nvidia-cards-into-their-professional-counterparts/420/ I just removed two resistors. Here is a screenshot

Hi Gordan, I wanted to let you know that today I decided to have a try for my GTX 680. Gigabite GTX 680 2048 MB GDDR5. I know that this particular card could be hard-moded to GRID K2 so VGA passthrough could work. Following instructions found on http://www.eevblog.com/forum/chat/hacking-nvidia-cards-into-their-professional-counterparts/420/ I just removed two resistors. Here is a screenshot

I''m using Xen 4.3, installed from source on Ubuntu 13.04. I''ve successfully installed a Windows 8 guest, and had Xen pass it an AMD FirePro W7000 GPU (technically 2 PCI devices - the second is for the sound), as well as the virtualised graphics adapter. Windows finds the card fine, and I''ve installed AMD''s drivers. Device Manager says that the card cannot

On 01/02/2014 11:56 AM, Ian Campbell wrote: > You can select a non-default model use by using the > "device_model_version" directive in your config. From what I gather, for now, you MUST select a non-default model, using something like: device_model_version="qemu-xen" device_model_override="/usr/bin/qemu-system-x86_64" > In the context of Debian the

On Wed, 2014-01-01 at 09:52 -0600, Marc F. Clemente wrote: > I have seen posts mentioning "traditional" and "upstream" qemu-dm. > But it is not clear to me what the difference is between "traditional" > and "upstream", or how to select either one. This is explained in the xl.cfg(5) man page. http://xenbits.xen.org/docs/unstable/man/xl.cfg.5.html

Hello, I would like to report to the group that I have been successful with VGA passthrough using the following configuration: Gigabyte GA-890FXA-UD5 ASUS EAH5750 1GB GDDR5 video Fedora 13 XEN 4.0.1 Windows 7 64 bit HVM guest Xen was installed per Pasi''s Fedora 13 Xen 4.0 Tutorial found here: http://wiki.xen.org/xenwiki/Fedora13Xen4Tutorial The tutorial was very helpful and many