similar to: Nut OpenBSD

Bonjour serveur : Fujitsu TX1310 M1 - OpenBSD 6.6 UPS : Eaton Ellipse pro 1200 Serveur en fonctionnement normal. Installation classique sur le serveur par pkg_add nut-2.7.4p5 : quirks-3.16 signed on 2018-10-12T15:26:25Z nut-2.7.4p5: ok The following new rcscripts were installed: /etc/rc.d/nut /etc/rc.d/upsd /etc/rc.d/upsmon See rcctl(8) for details. New and changed readme(s):

Bonjour Openbsd 6.6 - NUT 2.7.4 from source - Eaton Ellipse Pro Installation OK upsc OK upsmon -c fsd OK (shutdown effective) I suppose mistake in upsmon config : # upsmon.conf MONITOR ellipse at localhost 1 upsmon pass master MINSUPPLIES 1 SHUTDOWNCMD "/sbin/shutdown -p -h now 'Sylvebarbe killed'" POLLFREQ 60 POLLFREQALERT 60 HOSTSYNC 120 DEADTIME 180 POWERDOWNFLAG

On 09/11/14 22:34, Charles Lepple wrote: > On Sep 11, 2014, at 11:04 PM, Stan Gammons <sg063015 at gmail.com> wrote: > >> I see a libusb_get_interrupt message in the log. Could that be the problem? > Yes, it seems related. > > 1.126896 upsdrv_initinfo... > 1.126906 upsdrv_updateinfo... > 1.127023 libusb_get_interrupt: Function not implemented >

On Sep 11, 2014, at 11:04 PM, Stan Gammons <sg063015 at gmail.com> wrote: > I see a libusb_get_interrupt message in the log. Could that be the problem? Yes, it seems related. 1.126896 upsdrv_initinfo... 1.126906 upsdrv_updateinfo... 1.127023 libusb_get_interrupt: Function not implemented 1.127030 Got 0 HID objects... 1.127036 Quick update... Come to think of it, this

On 09/11/14 21:43, Charles Lepple wrote: > On Sep 11, 2014, at 9:48 PM, Stan Gammons <sg063015 at gmail.com> wrote: > >> I have an APC USB UPS that was working on OpenBSD 5.5 with NUT 2.7.1 When I installed the latest 5.6 snapshot with NUT 2.7.2 the UPS no longer sends status messages when it loses line power. I asked over on the OpenBSD ports list and so far haven't had

I have installed samba on openbsd 3.1 with a pkg_add and everything went fine but for some reason it seems as if the executable to start samba is not there, what am I missing here is the install docs I followed but still can't get it started. Smbd and nmbd is under /usr/local/libexec but samba will not start. http://nomoa.com/bsd/samba.htm <http://nomoa.com/bsd/samba.htm>

Hi, Has anyone had any success? After a clean install of OpenBSD, I do the following:- pkg_add ftp://rt.fm/pub/OpenBSD/3.5/packages/i386/gmake-3.80.tgz pkg_add ftp://rt.fm/pub/OpenBSD/3.5/packages/i386/bison-1.35p1.tgz pkg_add ftp://rt.fm/pub/OpenBSD/3.5/packages/i386/ruby-ncurses-0.8.tgz Then, I get (via CVS) the asterisk source.. cd /usr/src/asterisk /usr/local/bin/gmake clean

On Sep 12, 2014, at 5:15 PM, Stan Gammons <sg063015 at gmail.com> wrote: > On 09/11/14 22:34, Charles Lepple wrote: >> On Sep 11, 2014, at 11:04 PM, Stan Gammons <sg063015 at gmail.com> wrote: >> >>> I see a libusb_get_interrupt message in the log. Could that be the problem? >> Yes, it seems related. >> >> 1.126896 upsdrv_initinfo...

On May 12, 2017, at 10:06 AM, Mike <the.lists at mgm51.com> wrote: > > > OpenBSD 6.1/amd64 > nut-2.7.4p0 (from OpenBSD package) > UPS: Tripp-Lite OMNI1500LCDT > > I cannot get the driver for the UPS to load without error. > > Here are the commands, with the output, and the config files: > > ======================================================= > #

On 09/17/14 22:31, Charles Lepple wrote: > On Sep 12, 2014, at 5:15 PM, Stan Gammons <sg063015 at gmail.com> wrote: > >> On 09/11/14 22:34, Charles Lepple wrote: >>> On Sep 11, 2014, at 11:04 PM, Stan Gammons <sg063015 at gmail.com> wrote: >>> >>>> I see a libusb_get_interrupt message in the log. Could that be the problem? >>> Yes, it

Howdy, I had this working with lots of help for a developer before (Charles Lepple), but after upgrading to a somewhat more current version of FreeBSD the patched-up version stopped working. Seeing as this was more than a few years ago, I thought I'd give a new libusb and NUT a try to see if it might work out of the box. So far, no luck. Some info: FreeBSD 6.3 libusb 0.1.12 NUT 2.4.1

I'm running a new install of 4.8-RELEASE on i386. Running "pkg_add -r gnome2", the following errors are reported: (I've defined the BATCH environment variable). Fetching ftp://ftp.freebsd.org/pub/FreeBSD/ports/i386/packages-4.8-release/All/gdm2-2.4.1.3.tgz...Syntax error: end of file unexpected (expecting "then") pkg_add: command 'if [ ! -f

-----BEGIN PGP SIGNED MESSAGE----- ============================================================================= FreeBSD-SA-02:01 Security Advisory FreeBSD, Inc. Topic: Directory permission vulnerability in pkg_add [REVISED] Category: core Module: pkg_install

On 5/13/2017 10:20 AM, Charles Lepple wrote: > On May 12, 2017, at 10:06 AM, Mike <the.lists at mgm51.com> wrote: >> >> >> OpenBSD 6.1/amd64 >> nut-2.7.4p0 (from OpenBSD package) >> UPS: Tripp-Lite OMNI1500LCDT >> >> I cannot get the driver for the UPS to load without error. >> >> Here are the commands, with the output, and the config

Hey Charles, Many months ago you assisted me in making some code changes to get my Tripp Lite up and running. Thank you for that. Those changes you committed to the repository work very well. I just built a new image for a Raspberry Pi running the latest Raspbian OS and the latest nut-master. I have everything working ... except I seem to be losing my device periodically. So if I enable my

Charles, It starts out good, then goes into a Connection timed out loop. If I can provide any information to fix a driver I'll do my best. Here's the output: # /usr/local/ups/bin/usbhid-ups -DD -a eaton Network UPS Tools - Generic HID driver 0.41 (2.7.4) USB communication driver 0.33 0.000000 debug level is '2' 0.002550 upsdrv_initups... 0.288229 Checking device

I have several Tripplite SU2200RMXL2U and SU3000RM2U units that I would like to monitor using Nut. I have tried to attach to the units using a serial cable with the tripplite and tripplitesu drivers with no success. The drivers simply seem to not recognize the UPS. I then tried using the tripplite_usb driver with the usb cable. It definitely sees the UPS but I am getting errors which told me

My manifest includes this snippet class app_client_openbsd { $app_client_pkgs_obsd = [ ''glib2-2.24.1p2'', ''gtar-1.23p1'' ] package { "${app_client_pkgs_obsd}": ensure => ''installed'', source => "http://${installserver}/openbsd/${operatingsystemrelease}/packages/${hardwaremodel}/${name}.tgz", } This

OpenBSD 6.1/amd64 nut-2.7.4p0 (from OpenBSD package) UPS: Tripp-Lite OMNI1500LCDT I cannot get the driver for the UPS to load without error. Here are the commands, with the output, and the config files: ======================================================= # upsdrvctl start Network UPS Tools - UPS driver controller 2.7.4 Network UPS Tools - Generic HID driver 0.41 (2.7.4) USB communication

Hi, I'm trying to setup my Mustek 600 with USB (no serial ports on my computer) on Gentoo. The configuration I use is: [Mustek] driver = megatec_usb port = auto desc = "Power Mustek 600 USB" The NUT I use on my x86_64 machine is: sys-power/nut-2.4.3-r2 USE="bash-completion ssl usb xml -cgi -hal -snmp" When I start upsdrv I get: weasel ~ # /etc/init.d/upsdrv start