similar to: Timer doesn't appear to start

The time and upssched-cmd are now working. Here are the issues I had: 1) Did not define NOTIFYCMD in upsmon.conf Added NOTIFYCMD /sbin/upssched 2) Added +EXEC to NOTIFYMSG rules I am using 3) Change ownership of upssched.conf to my nut user nutmom. I had added nutmon to the group nut but it didn't work. Thanks again for all your guidance On Tue, Jan 28, 2020 at 7:00 AM

If you look closer at: > pi at nutpi:~ $ sudo ls -alt /home/nutmon > total 32 > -rw------- 1 nutmon nutmon 172 Jan 26 12:32 .bash_history > drwxrwx--- 2 nutmon nutmon 4096 Jan 26 12:32 upssched there is a d in the first position of the upssched permissions showing this is a directory. This is the directory location for PIPEFN and LOCKFN as defined in

One last update. I needed to log out and in to get the group add of my user nutmon to be recognized. My permissions are now root:nut on upssched.conf and it works. On Tue, Jan 28, 2020 at 7:00 AM <nut-upsuser-request at alioth-lists.debian.net> wrote: > Send Nut-upsuser mailing list submissions to > nut-upsuser at alioth-lists.debian.net > > To subscribe or unsubscribe

Here are my permissions and user info. Let me know if there is anything else I should check pi at nutpi:~ $ ls -alt /etc/nut total 56 drwxr-xr-x 87 root root 4096 Jan 26 15:22 .. drwxr-xr-x 2 root nut 4096 Jan 26 13:53 . -rw-r----- 1 root nut 4719 Jan 26 13:15 upssched.conf -rw-r----- 1 root nut 15347 Jan 26 11:25 upsmon.conf -rw-r----- 1 root nut 1543 Jan 26 10:02 nut.conf -rw-r-----

I only pasted a subset of my upsmon.conf. NOTIFYCMD is in my upsmon.conf AFA nutmon user. I was trying different things I had the directory as nutmon nut but changed it to nutmon nutmon to see if that worked. It didn't make a difference. Sorry about the digest this. I needed to hit a line in gmail web client to see the subject line. Know I know. Thanks for the heads up.. [root at donner

I have a Raspberry PI that I have connected to a Deltec UPS via serial (upscode2 driver). I had an older version of Rasbian running. The nut configuration worked fine but I had mail issues I couldn't resolve when gmail changed how it handled MTAs. Plus it was running an old version of Deb that is no longer supported. It was broken enough I could not upgrade to a never version so I started from

Roger, here is my output of ps -elf |grep upssched root at nutpi:~# ps -elf |grep upssched 0 S root 1242 1191 0 80 0 - 1834 pipe_w 05:23 pts/0 00:00:00 grep upssched No timer, just the grep of upssched.. On Mon, Jan 27, 2020 at 4:27 AM <nut-upsuser-request at alioth-lists.debian.net> wrote: > Send Nut-upsuser mailing list submissions to >

The nut ups daemons seem to be communicating with the UPS but upscmd gives me no joy. Running commands do nothing and produce no output. Using the web interface returns an authentication failure and that is the only clue I have. I believe I have everything setup correctly but it's not working. Can someone review this and give me clues as to what I should research next?

I recently bought new batteries for this old "Compaq" Deltec PRA 1500 ups and downloaded LanSafe3 and haven't had much luck communicating with the UPS via a serial cable. Does anyone out there have a manual on this UPS? Or has anyone else gotten this to work with LanSafe3 and/or upsd? Any help would be greatly appreciated! Jon Moss __________________________________

Hi. I have an improvement suggestion. Say that a careless user starts editing upsmon.conf before having read the complete documentation (not that I know of any such users of course) and starts by adding "RUN_AS_USER = nutmon" and then creates this user. Later he discovers that the rpm package already has created a "nut" user and therefore deletes the nutmon user but forgets to

Hello all, I'm having problems with what I'm told should be a straightforward issue. The message in /var/log/daemon is: <quote> Feb 13 10:37:57 lupin upsmon[31324]: Master privileges unavailable on UPS [lupin1500AVR@localhost]

This will sound a bit odd. I have a current server running with a UPS. I'm in the process of replacing that server with another and obviously want Nut to monitor the new server. The new/old servers are in different locations, so I don't have access to the UPS while configuring the replacement server. I think I have the config ok, but what errors would you expect to see? Typically I'm

Ok rebooted All running ok now. Great thanks a lot! In system.log Jun 15 21:38:54 c01 com.apple.xpc.launchd[1] (org.networkupstools.upsmon): Unknown key for Boolean: SuccessfulExit Jun 15 21:38:54 c01 com.apple.xpc.launchd[1] (org.networkupstools.upsmon): This service is defined to be constantly running and is inherently inefficient. What is the purpose of Boolean: SuccessfulExit?

[As posted as Ubuntu Question #184284 on Launchpad] Hi, I try to set up nut (2.4.3) on my Lucid (10.04.3 LTS) to make use of my old but very trusty UPS (Best Power Fortress 660 LI). Yes, this UPS is old (about 16 years), but with its third battery pack last week it is as good as new. It runs perfectly well with Windows XP, Vista and even Windows 7. But not so with Ubuntu and nut. After

>I just went through the same issue. Take a look at my thread. >Double check that upsmon.conf:NOTIFYCMD /sbin/upssched is not still commented. Thanks for the response, can you link to it? I'm not finding it in the search. I'm not using /sbin/upssched, I have NOTIFYCMD set up as: NOTIFYCMD /home/pi/Documents/scripts/ups-log.py and it's not commented out. On Tue, Feb 11, 2020

I've been wanting to build the trunk since Arjen added the powerpanel driver... been having a little trouble... after running these commands: /usr/local/libexec/automake19/aclocal -I m4 /usr/local/libexec/autoconf259/autoheader /usr/local/libexec/automake19/automake -ac /usr/local/libexec/autoconf259/autoconf ./configure --with-cgi --with-user=nutmon

Hello all, Some time ago, you all were very helpful in getting nut running on an OpenBSD system, using--for what it's worth--a CyberPower 1500AVR. So I finally got my FreeBSD system's UPS, also a CyberPower 1500AVR, within reach of its serial cable and I'm trying to get nut running here. I'm going nuts. Basically, I copied the OpenBSD configuration over to the FreeBSD system

---> On 15/03/2009 8:00 AM, nut-upsuser-request at lists.alioth.debian.org wrote: > Message: 1 > Date: Sat, 14 Mar 2009 21:47:08 +0100 > From: Arjen de Korte <nut+users at de-korte.org> > Subject: Re: [Nut-upsuser] Weird Load and Battery Temp Readings > To: nut-upsuser at lists.alioth.debian.org > Message-ID: <20090314214708.37122w00w79l6u9s at mail.de-korte.org>

Hi, You don't check for malloc failure. I've made a patch that is possibly wrong but it saves the program from SIGSEGV and replaces it with SIGABRT. -peter diff -ru icecast-2.3.2-ORIG/src/admin.c icecast-2.3.2/src/admin.c --- icecast-2.3.2-ORIG/src/admin.c Fri May 2 17:40:00 2008 +++ icecast-2.3.2/src/admin.c Thu Apr 28 19:53:03 2011 @@ -291,6 +291,9 @@

Hello, I'm looking for a way in which R can make my live easier. Currently i'm using R convert data from a dataframe to json's and then sending these json's to a rest api using a curl command in the terminal (i'm on a mac). I've been looking for a way to use R for sending data from R to the rest api. My primairy focus was on using R for executing the curl command,