similar to: warnung: base variable (battery.runtime.low) is immutable

Hello list, I've installed NUT on an HP blade server, and I try to get it communicating via SNMP with 2 HP R3000 UPSes, each fitted with a AF465A management card. To do this, I used the snmp-ups driver, and configured it for the "cpqpower" MIB. Communication with the UPSes is established. My problem is that both UPSes constantly return the "OL OB" status which, in

Hello We have an Socomec Sicon Netys PR3000 UPS equipped with NetVision Web/SNMP adaptor. I try to monitor the ups using snmp-ups driver and netvision mibs set. The snmp-ups driver starts correctly and connects to the UPS, upsd confirms it, but upsmon constantly shows "No communication" error I think the cause is the SNMP adapter reports the UPS status as "ECO mode"

Hi Here is a very minor patch for the bcmxcp.c driver, mainly fixing the function name used in debug statement, and at the same time fix indentation. Regards Alf Hogemark From 86c7940d0ea11b5b38a7f4518095ee2428d658c7 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Alf=20H=C3=B8gemark?= <alf at i100.no> Date: Mon, 1 Jul 2013 21:11:40 +0200 Subject: [PATCH] bcmxcp: Fix method name outputted in

Charles Lepple wrote: > On 8/2/06, Didrik Pinte <dpinte@itae.be> wrote: > > Le mercredi 02 ao=FBt 2006 =E0 08:08 -0400, Charles Lepple a =E9crit : > > > On 8/2/06, Didrik Pinte <dpinte@itae.be> wrote: > > > > Can you start the driver like this: "/sw/bin/newhidups -u root -DDD" > > > and paste some of the output? > > > > Here

Hi Arnaud, Hi Scott, Hi list, Here is a patch to support the Zinto D from ONLINE USV-Systeme AG. I already sent a version to Russell Kroll (2006-04-09), without no response and I cannot find support for Zinto in svn until now. I found a discussion on this list about the Xanto from ONLINE, but the Zinto seems to use different commands. The commands are quite similar to those for Opti-UPS, so I

Best fortress support was understandably dropped, but we still use them, and someone else may want the driver I ported to nut-2.0. We also often attach the serial cable from a UPS to a network terminal server, since servers these days don't come with very many serial ports. (They call them "legacy" ports.) I submitted a patch to support these for nut-1.x, and it was rejected

Hi, I have a problem with asterisk-0.5.0 which I don't understand. The monitor says when making a call: *CLI> -- Executing Dial("SIP/roger-c456", "Modem/ttyI0:BYEXTENSION|60|tTm") in new stack -- Called ttyI0:1234567890 WARNING[196621]: File dsp.c, Line 1198 (ast_dsp_process): Unable to detect process 2 frames WARNING[196621]: File dsp.c, Line 1198

Here's the first update of ups.status: 0.102449 getting data: ups.status (.1.3.6.1.4.1.232.165.3.4.5.0) 0.102546 su_ups_get: ups.status .1.3.6.1.4.1.232.165.3.4.5.0 0.102646 nut_snmp_get(.1.3.6.1.4.1.232.165.3.4.5.0) 0.104539 SNMP UPS driver : entering su_status_set() 0.104641 su_find_infoval: found OL (value: 3) 0.104730 => value: 3 0.104823 getting data: ups.status

Hi, I've got a apc Smart-UPS DP 8000 XL and a 940-0024c cable., and when I launch upsdrvctl, I've got the following message : Network UPS Tools - UPS driver controller 2.0.2 Network UPS Tools (version 2.0.2) - APC Smart protocol driver Driver version 1.99.7, command table version 2.0 dstate_setflags: base variable (input.transfer.high) does not exist dstate_addenum: base

Gentlemen, Please note that what follows pre-dates the latest changes from Arnaud (just thought someone might want to look at these before I can test the latest!). When running newhidups with -D -D -D I saw messages that looked like errors, and it took me a while to understand that they were not really errors. I therefore added two new entries in apc-hid.h, and I modified a couple of diagnistic

Hi Henning, you should get in touch with Carlos, who his developing a generic megatec driver (available from svn: http://eu1.networkupstools.org/source.html) Arnaud -- Linux / Unix Expert - MGE UPS SYSTEMS - R&D Dpt Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/ Debian Developer - http://people.debian.org/~aquette/ OpenSource Developer -

Hi NUT-Team, I have an effekta MKD1000 USV and I want to connect with NUT over serial device to this USV.I have used blazer_ser as driver but I cannot get a connection to the USV. When I have a look to the driverlist then the effekta MKD1000 is not listed.In a window-System I can connect to the USV with the UPS management system from generex. Can you please help me to connect with NUT to the USV.

Hi, the following UPS isnt supported by the driver "usbhid-ups". Manufacturer: APC Model: Back-UPS 950 (https://www.apc.com/shop/de/de/products/APC-BACK-UPS-950VA-230V-AVR-Schuko- Sockets/P-BX950U-GR) Config: [USV] driver = usbhid-ups port = auto desc = "USV" . MODE=standalone Terminal: root at debian-jessie-final:~# sudo upsd -u root

Hey, I have the problem that my timer daemon doesn't start. I checked my configuration more than two times and I don't find the failure. Maybe someone can help me and tell me where the failure could be. --- syslog --- May 13 21:50:34 s-monitor1 upsmon[1674]: UPS usv3 at localhost on battery May 13 21:50:34 s-monitor1 upssched[855]: Executing command: ONBATT May 13 21:50:34 s-monitor1

Hi, I cant get it working. Here is my terminal output: root at debian-jessie-final:~# lsusb -d 051d:0002 Bus 001 Device 010: ID 051d:0002 American Power Conversion Uninterruptible Power Supply root at debian-jessie-final:~# ls -l /dev/bus/usb/001/010 crw-rw-r-- 1 root nut 189, 9 Mai 6 15:35 /dev/bus/usb/001/010 root at debian-jessie-final:~# sudo upsdrvctl start Network UPS Tools - UPS driver

Arnaud: in today's commits, I removed three lines that you apparently added on August 10: 1.1.1.1.8.1 (aquette 04-May-05): if (mode == HU_WALKMODE_INIT) 1.1.1.1.8.1 (aquette 04-May-05): { 1.1.1.1.8.1 (aquette 04-May-05): dstate_setflags(item->info_type, item->info_flags); 1.1.1.1.8.6.2.5 (aquette 10-Aug-05): /* Verify variable setability/RW */

On May 2, 2019, at 4:08 PM, Mathias Passow wrote: > > Hi, the following UPS isnt supported by the driver „usbhid-ups“. > > Manufacturer: APC > Model: Back-UPS 950 (https://www.apc.com/shop/de/de/products/APC-BACK-UPS-950VA-230V-AVR-Schuko-Sockets/P-BX950U-GR) > > Config: > [USV] > driver = usbhid-ups > port = auto > desc = "USV"

Hi there, i have a problem with the NOTIFYCMD in the upsmon.conf file. My line in the config looks like this: NOTIFYCMD "/etc/nut/upsnotify.sh" Now this ist my "/etc/nut/upsnotify.sh": #!/bin/bash EMAIL='mail at domain.de' SMS1='+49123456789' SMS2='+491987654231' #eMail versenden echo -e "Die USV mit dem Namen '$UPSNAME' hat seinen

Good morning, i have an Xanto S1000 USV the Manufactor is ONLINE USV-Systeme AG. I tried all the buildin drivers, also the driver for the driver for the Generic UPS, nothing worked for this UPS so now my question has anyone else this UPS and functional driver? Thanks and Greets Dennis

Dear Nut-Devs, I have general question to the contribution and the handling of new code in the NUT-Project. We would like to implement our USV-Solution as a driver to NUT, but we are having the problem, that we need a powerful “C”-based gpio library for it. We discussed this topic internally, and we are having the opinion, that it does make sense, to write this library separate from a