similar to: raspberry pi and tripplite_usb

On Sep 10, 2019, at 10:40 AM, grumpy at mailfence.com wrote: > > i have a OMNIVS1500XL > i have used nut for several years on a full sized pc with no problems > i am trying to get nut working with this ups on a raspberry pi > i tried with a pi 3b running raspbian stretch > i tried with a pi 3b running raspbian buster The “unable to handle kernel paging request” points to a

> > > 2.117586 send_cmd(msg_len=2, type='G') > > 3.219418 libusb_get_interrupt: Connection timed out > > 3.219474 libusb_get_interrupt() returned 0 instead of 8 while > sending 3a 47 b8 0d 00 00 00 00 '.G......' > > 4.219593 libusb_get_interrupt: Connection timed out > > 4.219661 libusb_get_interrupt() returned

this probably has no relevance to the subject but i have run a OMNIVS1500XL with the tripplite_usb driver for several years with no problem i am using a a powered usb hub if that make any difference

Please ignore the previous message as I sent it before it was complete. Hello, I have a Tripplite SMART2200VS that isn't being shut down when the nut master asks it to. My initial test was simply upsmon -c fsd which did cause the system to shut down, however the UPS remained on and providing power to its loads. Looking in the logs (daemon and syslog) it was not clear to me that NUT was

On Mon, 10 Aug 2020, Todd Benivegna wrote: > synoups: https://hastebin.com/xexafofiha.bash Wow! What a mess. It looks as if Synology wanted to write their own "NUT", but decided it would be easier to put their ideas in a script when they saw they could use upssched.conf to call it. NUT intends such a script for timer management. Synology use it for general system management.

Hello all, Here is build instructions for putting NUT on a Raspberry Pi. Charles - Feel free to put this on your docs list. # Do an rpi-update to prevent USB strangeness #some dependencies from repo sudo apt-get -y install m4 libtool libudev-dev automake #fixing autoconf for later sudo ln -s /usr/share/autoconf/Autom4te /usr/local/share/autoreconf/Autom4te sudo ln -s /usr/bin/autom4te

Roger, I get 4.3.8(1)-release There was good reason, BTW, for the script to NOT fine the journal script on my machine. I had not downloaded it yet. On 7/14/2019 9:06 AM, Roger Price wrote: > On Sun, 14 Jul 2019, David White wrote: > >> ... I saw nothing that looked like a problem with the report save the >> sections <scriptname> "Cannot access <scriptname>.

So I finally got a test in after I changed my RPi to the master and everything else (including my Synology) to slaves.  Before I did that though, I timed the shutdown of my Synology since it is the slowest slave to shutdown.  It took 40 seconds to shutdown, so I changed HOSTSYNC in upsmon.conf on the master (“Proton”) to 60.  I then did a test ("sudo upsmon -c fsd”). The slaves shutdown, then

Hi all, Someone should be able to help me - I think this is an easy one. I have a Raspberry Pi successfully running nut-server talking via USB to a Liebert UPS. It is running Version 2.6.4 which was installed ages ago following instructions freely available on the internet by A. Bakalidis I now see that the directory containing 2.6.4 in the repository at

Hello, I am attempting to run tinc on a raspberry pi (version 1 B HW, 512mb ram). Tinc starts, but then the tinc daemon crashes. # cat /etc/issue Raspbian GNU/Linux 7 \n \l # cat /etc/debian_version 7.8 $ apt-cache showpkg tinc Package: tinc Versions: 1.0.19-3 (/var/lib/apt/lists/mirrordirector.raspbian.org_raspbian_dists_wheezy_main_binary-armhf_Packages) Description Language:

I was able to make NUT and my Powercom SPIDER UPS (USB port) work under the Raspberry Pi Desktop (Debian). Everything works in VMware Workstation 15 Player. But my Raspberry Pi 3b + (with raspbian last version) doesn’t work with the same UPS, and with same NUT configuration. Raspberry sees the UPS, but the driver does not cling. Here is the response of Raspberry 3b + to some commands. pi at

Everything runs fine for several hours, then communication is lost and nut doesn't reestablish communication on its own. Running sudo upsdrvctl stop then sudo upsdrvctl start reestablishes communication. OS Version: Linux piaware 4.9.35-v7+ #1014 SMP Fri Jun 30 14:47:43 BST 2017 armv7l GNU/Linux Nut Version: 2.7.2-4 Nut Installation Method: apt Device: CyberPower PR1500LCD Uses ? ? Generic

I've searched the listserv archive, to no avail, so I hope I'm not duplicating a previous problem. I am anxious to get this working, so I'm open to uninstalling what I have and starting over. One note which may not be meaningful is that this UPS pre-dates the Raspberry Pi I've got connected to it, and I used to use it with the CyberPower software, which requires logging in with a

>> [Roger wrote:] >>> By the way, do you have offdelay and ondelay values in your ups.conf ? >> >> No, I haven’t. I just added. Should I add more lines here? >> >> maxretry = 3 >> >> [ups] >> driver = usbhid-ups >> port = auto >> desc = "CPS" >> pollinterval = 15 >Yes, ondelay

>I wonder how difficult it would be to rip off their modifications and revert to a.standard, functional nut. I think it should be preatty simple. just rename Synology files and replacewith what you think is the best there... it's just a banch of scripts nothing more...

    Lately I replaced my 10+-year-old server with a nano-ITX-type one that has USB but not old serial ports.  I connected my FE700VA to DB25-to-9-to-USB cables, but haven't been able to set it up. Apparently my DB9-to-USB cable (Prolific Technology, Inc. PL2303 Serial Port) has issues needing old software (setserial?) and some new software (fconfigure) being changed.  Has anyone managed

Is there a version of Samba that will run on a Raspberry Pi 2? If so, can somebody point me to it? If not can, Samba be compiled on a Raspberry Pi 2? Thanks for your help. -- Paul (ganci at nurdog.com) Cell: (303)257-5208

On 5/28/19 3:39 PM, Julian H. Stacey wrote: > grumpy at mailfence.com wrote: >> a friend gave me an old apc smart-ups 1250 >> it has a rs232 interface but i have no pc with a rs232 port >> i attempted to use a rs232 to usb adapter but the ups goes nuts >> i connected the ups to batteries and verified it was working properly >> when i plug the usb cable into the pc

a friend gave me an old apc smart-ups 1250 it has a rs232 interface but i have no pc with a rs232 port i attempted to use a rs232 to usb adapter but the ups goes nuts i connected the ups to batteries and verified it was working properly when i plug the usb cable into the pc the ups shuts down when i attempt to turn it on it beeps twice and shuts down this all occurs before i start the nut software

Targetting the raspberry pi, what triple/flags should I set? I tried triple: armv4t-unknown-linux-gnueabi and ld fails with: a.out uses VFP register arguments if i set hardfloat (using optdata.FloatABIType = FloatABI::Hard), ld fails with an assertion: 2.22 assertion fail ../../bfd/elf32-arm.c:11477 what am I missing?