similar to: "battery is low" logged

On Sep 6, 2019, at 6:28 PM, James wrote: > > I got around to unplugging my UPS and I found it doesn't last nearly as long as estimated. The estimates are typically less accurate when the load is light (output is showing 5%). Also, as Eyal mentioned, five years is getting old for a lead-acid battery. > > Is the "upsmon[1446]: UPS desktop_ups at localhost battery is

This is part UPS and part nut question. I had a (intentional) power outage. The UPS/nut properly shut the system down when battery was down to 20%. It ran for only 18 minutes rather than the expected 40 (see later). After it charged to 37% I removed power from the UPS. After 4-5 minutes the system shut down. However, when I restored power to the UPS the machine powered up immediately (no delay).

My UPS has an LCD that says the battery is 100% and the estimated run time is 12min. The uspc has similar results. The problem is when line power is lost the UPS batter goes to 0% very quickly (seconds). It charged to 85% when power was restored. 86-100% is slower. I did: $ upscmd desktop_ups test.battery.start.deep Username (admin): Password: OK Now the ups.test.result says there is a

Hi BACKGROUND INFO:I have a new Eaton 5E 1100i USB UPS which their website claims is supported on Linux. They don't provide software for it for Linux, only for Windows.Referring links: https://www.eaton.com/za/en-gb/catalog/backup-power-ups-surge-it-power-distribution/Eaton_5E_UPS.html https://www.eaton.com/za/en-gb/skuPage.5E1100IUSB.specifications.html It was manufactured in May 2020

On 2018-12-16 8:04 a.m., Charles Lepple wrote: > On Dec 15, 2018, at 10:32 PM, James <bjlockie at lockie.ca> wrote: >> >> My UPS has an LCD that says the battery is 100% and the estimated run time is 12min. >> The uspc has similar results. >> The problem is when line power is lost the UPS batter goes to 0% very quickly (seconds). >> >> It charged to 85%

I switched my desktop with my raspberry pi because I thought my desktop ups had a larger capacity. Now the ups.load of each is not what it was (it should be). The battery.runtime is better for my desktop (it's supposed to be worse) and my raspberry pi is worse (I hoped for hours better). What am I seeing? I switched them for longer raspberry pi time and the APC battery is getting old. :-)

Maybe a kernel USB issue, but people on this list may have encountered this issue. I am testing a new UPS (EATON 5E 1500iUSB) and am having a problem with the USB connection failing. My old UPS (EATON Ellipse MAX 1500) works just fine with the latest f30. Both devices identify as ID 0463:ffff MGE UPS Systems UPS To narrow the focus I booted recent live CDs on a PC that has no other USB devices

On Tue, 7 Jan 2020, Eyal Lebedinsky wrote: > On 2020-01-07 23:01, Roger Price wrote: >> There is no report for variable "ups.delay.start" in your upsc output. >> What does command "upsc <ups> ups.delay.start" report? > > $ upsc eaton ups.delay.start > Init SSL without certificate database > Error: Variable not supported by UPS I am surprised

On up-to-date f36, with latest kernel 6.1.7-100.fc36.x86_64. After receiving a few of these messages Broadcast message from nut at e7.eyal.emu.id.au (somewhere) UPS ups at ups is unavailable I noticed and ran sudo systemctl restart nut-driver at ups.service which triggered Broadcast message from nut at e7.eyal.emu.id.au (somewhere) Communications with UPS ups at ups established I now added

Hi Users NUT, I want monitor a UPS of brand SMS (Sinus Double 8 KVA) using a raspberry-pi. In compatibility list, is listed to use the blazer_ser driver. I use a USB adapter to RS-232 conected in to the No-Breake. Follow the comands e confs. root at rasp:/home/pi# lsusb *Bus 001 Device 004: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port* Bus 001 Device 003: ID 0424:ec00 Standard

On 07/09/2019 08.28, James wrote: > I got around to unplugging my UPS and I found it doesn't last nearly as long as estimated. > > Is the "upsmon[1446]: UPS desktop_ups at localhost battery is low" logged when "battery.runtime:" = "battery.runtime.low: 120"? > > Does any make better batteries that don't go down faster when they get old? In my

I am new to SAMBA. I am using it with LINUX and I love it! Nice change from you know who. I am sorry if this is a lame question, but I am setting up a Primary Domain Controller and a Backup Domain Controller. All the clients are Windows 2K or XP. I need the clients to reset their passwords every 30 days. I am having a hard time locating a procedure to set this feature. LINUX has 'chage'

Hi, I have a trivial peace of dialplan for exten 100. I try to change it to _1XX and the asterisk act according to a different (Default??) dial plan and not the one I want? Is that possible? Where is the other dialplan sits? In my extention.conf I can't see something that look like what asterisk is dialing. How can I trace\debug my dialplan? Thanks, Eyal -------------- next part

The battery was replaced in December and the output from upsc was: $ upsc desktop_ups battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 20 battery.mfr.date: CPS battery.runtime: 1020 battery.runtime.low: 300 battery.type: PbAcid battery.voltage: 13.5 battery.voltage.nominal: 12 device.mfr: CPS device.model: UPS CP850AVRLCD device.type: ups driver.name: usbhid-ups

Hi, I try to create a new table using MYSQL command in asterisk. This is what i write: Query resultid ${connid} CREATE TABLE IF NOT EXISTS "conference_600" ("id" int(11) NOT NULL auto_increment, "channel_id" varchar(40), "number_in_line" int(2), PRIMARY KEY("id")") and this is the warning that i get in the cli: app_addon_sql_mysql.c:383

Hi, I create Chat room with MEETME and now I have a problem. I want that the host of the room could identify the participants in the room by their speech, so that if a participant uses language the host could kick him from the room. Is there a way to do it? thanks. Eyal Mahalal -------------- next part -------------- An HTML attachment was scrubbed... URL:

On Dec 15, 2018, at 10:32 PM, James <bjlockie at lockie.ca> wrote: > > My UPS has an LCD that says the battery is 100% and the estimated run time is 12min. > The uspc has similar results. > The problem is when line power is lost the UPS batter goes to 0% very quickly (seconds). > > It charged to 85% when power was restored. > 86-100% is slower. It is common for an UPS

I am trying to debug a wine crash I am having when using GDI rendering for Starcraft BNet (Bug 5253). This bug does not happen in OpenGL mode, but my purpose is to understand the source of the bug and not to workaround it. (Bug link: http://bugs.winehq.org/show_bug.cgi?id=5253) The crash is in some unrolled memcpy loop that writes to screen memory, and as the bug description says, crashes after

Hi, I want to dial a party, play him a message and wait for his input, i.e. DTMF digits and use them to control the rest of the dial plan. How do I do it? If I use Dial it will not return until the end of the call, isn't it? Thanks, Eyal -------------- next part -------------- An HTML attachment was scrubbed... URL:

While working on the mge-hid subdriver, I wanted to add the 'beeper.mute' command. Unfortunately, the description I intended to use was used already by the 'beeper.off' instcmd: CMDDESC beeper.off "Temporarily mute the UPS beeper" Now of course we could add another instcmd 'beeper.reallyoff', but instead I would prefer to bite the buller and do the following: