similar to: Monitor UPS Brand SMS

On 06/08/2019 23.14, Mario Michielin Neto wrote: > Hi Users NUT, > > I want monitor a UPS of brand SMS (Sinus Double 8 KVA) using a raspberry-pi. In compatibility list, is listed to use the blazer_ser driver. I use a USB adapter to RS-232 conected in to the No-Breake. Follow the comands e confs. > > root at rasp:/home/pi# lsusb > *Bus 001 Device 004: ID 067b:2303 Prolific

I am far from expert on these matters. But have a couple questions: 1. Are you sure that /dev/ttyUSB0 exists and is the result of the Prolific USB->serial converter? For example, if you yank the Prolific and reboot, is /ttyUSB0 there still? It is possible that there is another /dev/ttyUSBx out there.I doubt this but wonder. 2. I have recently been fuddled due to permission problems of

On 9/10/2017 6:41 PM, Sam Varshavchik wrote: > Dutchman01 writes: > >> Hello all, >> >> ? >> >> I request a new NUT release as current dates back to March 9, 2016: NUT 2.7.4 >> >> The fact stays that not all distro?s use latest snapshots/commits from github >> dev tree. >> >> ? >> >> So please do release a new up to

Dear list, since some days I own an APC Back-UPS BX1400U. Now I try to connect my Raspberry Pi to it using NUT, but ... ;) The UPS is connected via an USB-cable, and "lsusb" shows an APC device. NUT is installed via "sudo apt-get install nut". My goal: a Synology DiskStation DS1515+ should "read" UPS-data provided from the Raspberry an shut-down itselt at 30%

Yes I do have Linux. I have assigned the ups.conf file as seen below.. [testups] Driver = usbhid-ups Port = /dev/ttyUSB0 When I try to start the ups driver I get the following error... $ sudo upsdrvctl start Network Ups Tools - UPS driver controller 2.7.1 Network Ups Tools - Generic HID driver 0.38 (2.7.1) USB communication driver 0.32 No matching HID UPS found Driver failed to start (exit

Hello i need your help regarding the following issue : i have a hero touch ups from infosec. it is connected via USB to a raspberry pi 3. i?ve configure ups.conf file as below [HERO] driver = blazer_usb vendorid = 0665 productid = 5161 either with port = auto or port = /dev/hidraw0 or port = /dev/ttySo the connection never works i get the

hello everyone, I've been testing the NUT solution as opposed to the undocumented LanSafe application to control my Eaton UPS. I am on a Slackware 13.37 system with a 2.6.37.6 kernel. NUT version is 2.4.3 . I installed the tarball by compiling it directly on my system (as a slackbuild package). The UPS is an Eaton Powerware 9155, but I don't know how to obtain the manufacturing date. The

Greetings, I am trying to get 4.2.0 Installed on a raspberry pi 2, I can build and install, but upon running samba -D I get the following: root at pdc1:/home/pi# samba -D samba: relocation error: samba: symbol lpcfg_lock_directory, version SAMBA_HOSTCONFIG_0.0.1 not defined in file libsamba-hostconfig.so.0 with link time reference I used the following to configure and build waf configure

On 09/11/2017 10:49 AM, Sam Varshavchik wrote: > Mike writes: > >> On 9/10/2017 6:41 PM, Sam Varshavchik wrote: >> > Dutchman01 writes: >> > >> >> Hello all, >> >> >> >> >> >> >> >> I request a new NUT release as current dates back to March 9, >> 2016: NUT 2.7.4 >> >> >> >> The

Hi there, I have a question about a raspberry pi as NUT server and a "relay". I explain my situation: I have an UPS with USB port, so I connect it to the rasp. The problem is that I have a device manageable only via USB port. How can I handle this configuration? My assumptions are: 1) split the USB cable from UPS to rasp and device, but I don't know if it works 2) connect the UPS

I am trying to join an existing samba server but I get an error message that the DNS update failed. I have read that this doesn?t matter and the join is still successful. But the problem comes when I try to grant privileges to the unix admins. root at dna:/home/pi# net ads join -U administrator Enter administrator's password: Using short domain name -- DOMAIN Joined 'DNA' to dns

I am trying to use software to program a scanner radio (BCD396t and UASD software). The software installs and seems to run properly, reading and writing database files. But I cannot connect to the scanner, through a USB-to-serial cable. OS: ubuntu-8.10, kubuntu-8.10, debian/lenny (tried them all) lsusb identifies the cable as follows: Bus 002 Device 002: ID 067b:2303 Prolific Technology, Inc.

I am new to SAMBA. I am using it with LINUX and I love it! Nice change from you know who. I am sorry if this is a lame question, but I am setting up a Primary Domain Controller and a Backup Domain Controller. All the clients are Windows 2K or XP. I need the clients to reset their passwords every 30 days. I am having a hard time locating a procedure to set this feature. LINUX has 'chage'

Hi, /etc/resolv.conf looks exactly like this: domain family.rapsberry.local search family.rapsberry.local nameserver 192.168.178.222 So to answer your question: yes the only Nameserver the raspberry has is itself. Greetings Am 2015-01-03 um 7:40 PM schrieb Rowland Penny: > On 03/01/15 16:31, Robert Hartmann wrote: >> Hi, >> >> i am really depressed at this moment. I set

Hi, I have a trivial peace of dialplan for exten 100. I try to change it to _1XX and the asterisk act according to a different (Default??) dial plan and not the one I want? Is that possible? Where is the other dialplan sits? In my extention.conf I can't see something that look like what asterisk is dialing. How can I trace\debug my dialplan? Thanks, Eyal -------------- next part

Hi everybody! It has been a journey but I almost manage to make my UPS properly communicate. This is the config: UPS Mecer/Mustek 2000 VA connected via USB with blazer_usb driver. MASTER Raspberry PI-1 SLAVE Raspberry PI-2 SLAVE iMac OSX 10.10.3 I can get access to the UPS from any of the three devices successfully. Problems: 1. When I launch /usr/local/ups/sbin/upsmon -c fed for testing I see

This is part UPS and part nut question. I had a (intentional) power outage. The UPS/nut properly shut the system down when battery was down to 20%. It ran for only 18 minutes rather than the expected 40 (see later). After it charged to 37% I removed power from the UPS. After 4-5 minutes the system shut down. However, when I restored power to the UPS the machine powered up immediately (no delay).

Hi, i am really depressed at this moment. I set up an domain controller using samba4 and an raspberry pi. I can join the domain and everything works BUT kerberos has some strange problems resolving my raspberry hostname. First of all some information: Raspberry pi is DHCP Server and DNS-Server (BIND9). First of all the configurations: Code: /usr/local/samba/etc/smb.conf # Global

Hi BACKGROUND INFO:I have a new Eaton 5E 1100i USB UPS which their website claims is supported on Linux. They don't provide software for it for Linux, only for Windows.Referring links: https://www.eaton.com/za/en-gb/catalog/backup-power-ups-surge-it-power-distribution/Eaton_5E_UPS.html https://www.eaton.com/za/en-gb/skuPage.5E1100IUSB.specifications.html It was manufactured in May 2020

Thanks for your help! In red below. Cheers simone On Thu, Jun 4, 2015 at 2:45 PM, Charles Lepple <clepple at gmail.com> wrote: > On Jun 3, 2015, at 11:45 AM, Simone Severini <severini.simone at gmail.com> > wrote: > > Hi everybody! > It has been a journey but I almost manage to make my UPS properly > communicate. > > This is the config: > > UPS