similar to: Freenas configuration Legrand Daker DK1kVA

> I have an UPS by Legrand, model Daker DK 1 kVA, i have tried to use > "nutdrv_qx" driver with usb but have no success. It should be supported out-of-the-box in the next release: https://github.com/networkupstools/nut/issues/616 Meanwhile, you could try the `blazer_usb` driver, with the `krauler` USB subdriver.

Dear Daniele, nice to meet you, I'm a collegue of Gabriele. The problem with "blazer_usb" driver ("blazer_ser" works correctly) is related to the following commands: - "F" and "I": when the KRAULER subdriver check these UPS answers it uses wrong constants to check the lenght of the received packets, so these commands are considered as "not

Dear Daniele, i understand perfectly, i'd like to explain you why we choosed to clone the blazer_usb driver: some of our devices uses Voltronic Q1 protocol and we tried the Krauler Subdriver (it was the one with the right "commands", Q1, F, etc.), but the issues were 2: - first: the Krauler Subdriver expects a different number of bytes in answer because in debug i see "Short

Dear Daniele, I'm trying to create a subdriver for 'nutdrv_qx' instead of modifying the Blazer as you suggested, but i honestly don't understand how to integrate usb-serial devices (some of our UPSs have USB but serial protocol Q1). i understand the serial version but not the USB one. i also checked the "Claim" function, but i can't see drivers that uses the VID

[apparently the list didn't get the message, probably because it exceeds the 40kb threshold, so here it is in all its glory with my reply] On Mon, 3 Sep 2018 at 14:32, Gabriele TAORMINA <gabriele.taormina at legrand.com> wrote: > > Dear Daniele, > > > "I fixed a few issues, and pushed your changes (amended) to this > > temporary branch:

Dear Admin, I'm working for Legrand UPS and i would like to know the correct procedure to send you some drivers source files to be added in the NUT software, this to extend support also to our UPSs. Thanks in advance, waiting for a response! Best Regards, Gabriele Taormina UPS Strategic Business Unit Field Application Engineer Phone: +39 0522/207046 Fax: +39 0522/207005

Good morning, my name is Stefano Pongiluppi and I'm a Legrand marketing manager, specialized in UPS management systems. About two years ago, my ex colleague Gabriele Taormina, that was in touch with Daniele Pezzini, sent to you the drivers for Legrand UPS (a copy of them are in attachment), but I see that these drivers are not yet included in the Master branch of the NUT project. Could you

Hello, I would like to monitor my UPS Legrand Niky S from a Raspberry Pi3 but I have not found it in the compatibility list. Has anyone been able to monitor an UPS Legrand using NUT? Your help would be greatly appreciated. Thanks, Daniele

Dear Daniele, thanks a lot for your support, i have some things that are not so clear for me: - I can send you the whole sources for our UPSs, do you need only Headers and C files or also other files (i suppose Driver list)? - Seen that we had some problems with the Blazer driver (the battery voltage calculation were not correct for our UPSs) we copied it and modified a bit while changing the

hello, i've got a problem with the notifycmd here is a part of my upsmon.conf : NOTIFYCMD /usr/local/ups/bin/nut_notify NOTIFYMSG ONLINE "UPS %s is getting line power" NOTIFYMSG ONBATT "UPS %s is on battery" NOTIFYMSG REPLBATT "The UPS %s battery is bad and needs to be replaced" NOTIFYMSG LOWBATT "UPS %s is being shutdown by the master" NOTIFYMSG FSD

hello i've got a problem with the "message command "option here is my config in smb.conf message command = /usr/local/samba/var/popup/get_popup "%f" "%t" "%s" "%I" & and the get_popup script date=`date +%d-%m-%Y` heure=`date +%H:%M` machine=$1 destinataire=$2 message=`cat $3` ip=$4 infos=`/usr/local/samba/bin/nmblookup -A $ip | grep

hello in first i made a test with a single machine with samba and ldap authentication, everything works fine. my qestion is the following : we have 2 samba server (pdc 2domains), one for the teachers population, and another for the students/teachers population. i dont know how to do to make it works with an ldap authentication. how to "tell" to ldap that the user "teacher1"

Hello, i've got a problem with boot pxe on pc, all my pc works fine except in a room where all the same pc doesnt works : my configuration (dhcp tftp etc...) works fine also here is a part of my tftpboot directory ghost/ memdisk menu.c32 pxelinux.0 pxelinux.cfg/ ./ghost: ghost288.IMA ghost_geii_101.IMA ghost_MM.IMA ghost_MM.IMA.old ./pxelinux.cfg: default here is a part of my default

Hello, a few years ago, I had encountered a problem regarding the inclusion of "%G" in logon script (logon script = %G.bat). The logon script with %G" was not executed I have this problem again with samba Version: 2:4.9.5+dfsg-5 on debian stable. Is it the same bug? For the moment i use this kind of script to use group definition : logon script = logon.bat logon.bat script :

hello, i'm looking for a script to launch upsdrvctl, upsd and upsmon. i dont find anything for a mandrake. does anybody have this kind of script thank you -- ---------------------------------------------------- Pascal Legrand *IUT de Chartres* - _Service Informatique_ ---------------------------------------------------- 1, place Roger Joly 28000 Chartres Tel : 02 37 91 83 36 - Fax: 02 37

Hello, i've got a problem on lenny with tftpd-hpa When i launch it from /etc/init.d/tftpd-hpa start, there is no pidfile created. what is the way to get it ? thank you -- --------------------------------------------------------------- Pascal Legrand *IUT de Chartres* - _Service Informatique_ --------------------------------------------------------------- 1, place Roger Joly 28000 Chartres

Hello, I'm trying to use "deliver" as a LDA for some users. I found the page http://wiki.dovecot.org/LDA where i read that i can use the ".forward" file in the user HOME directory. However, when i try, i get the following error in the maillog file : ... deliver(...): mbox: We need root IMAP folder, but can't find it or HOME environment ...deliver(...): Failed to

Helle and thanks for your answer You should never modify/update/create files under the /etc/libvirt/qemu directory. The correct way to do this is virsh dumpxml $domain > $domain.xml and virsh define $domain.xml. I didnt modify or create anything i just copied xml file from the old server to the new server Debug log from virt-manager (virt-manager --debug) would be helpful. Cf

Hello, i'm using samba 4.1 on a debian stable, samba act as a NT4 PDC. i have a permission problem in a samba share. It's a public share where everybody can read/write and it works fine. In this share, there is a directory with "specials" permissions drwxrwx--- 20 root grp2 4096 nov. 16 14:36 Dossier For me, these permissions allows someone from "grp2" group to

i've got a problem about a windows xp station : i change this machine from a domain to another, but when the user, wich use this machine, connect on it he lost his parameters and data (cause of the different sid). is there an easy way to make this user keep his parameters and data ? thanks