similar to: TrippLite SMX1500LCDT FreeBSD 11.2 trouble

Here is what I get: # usbconfig -u 1 -a 3 dump_curr_config_desc ugen1.3: <Tripp Lite TRIPP LITE UPS> at usbus1, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON (100mA) Configuration index 0 bLength = 0x0009 bDescriptorType = 0x0002 wTotalLength = 0x0022 bNumInterfaces = 0x0001 bConfigurationValue = 0x0001 iConfiguration = 0x0000 <no string> bmAttributes =

Here are all the usbconfig outputs you have requested. I have left a message with the Dev for NAS4Free to give up the ./configure for NUT portion.? I am hoping they will... usbconfig -u 0 -a 5 dump_device_desc? datanas: ~# usbconfig -u 0 -a 5 dump_device_desc ugen0.5: <TRIPP LITE UPS Tripp Lite> at usbus0, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON (100mA)? bLength = 0x0012 ? bDescriptorType =

> What does that revision number correspond to in FreeBSD release numbers? (e.g. 9.3, 10.0) FreeBSD 10.2-RELEASE #0 r286738M the last person probably wasn't able to give the ./configure probably because most people uses the precompiled iso to install NAS4Free.? if you need the ./configure I might have to look for their source on GitHub or something. /usr/local/libexec/nut/usbhid-ups -a

>> >> The output was also not as big as you made it out to be. > > Well, I didn't expect the driver to fail *that* badly :-) > > Assuming the UPS is still at /dev/ugen4.2, can you try the following command? (Probably needs to be run as root, with the driver stopped.) > > usbconfig -u 4 -a 2 dump_curr_config_desc Here is output of the command. Thank you for

Attached are config.log and usbhid-ups output with -u root (gzipped). Now driver output looks a lot like the one from port build. On Mon, Aug 20, 2018 at 1:42 PM, Charles Lepple <clepple at gmail.com> wrote: > On Aug 20, 2018, at 1:03 AM, Valentin Merkulov <schnobel at ickis.net> wrote: >> >> 0.033412 [D3] nut_usb_claim_interface: failed to claim USB >>

> >> usbconfig -u 4 -a 2 dump_curr_config_desc > > Here is output of the command. Thank you for your help with this. > > ugen4.2: <product 0x0601 CyberPower Systems> at usbus4, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON (50mA) > [...] > bLength = 0x09 > bDescriptorType = 0x21 > bDescriptorSubType = 0x10 >> RAW dump: >> 0x00 | 0x09, 0x21,

On Aug 19, 2018, at 2:04 AM, Valentin Merkulov <schnobel at ickis.net> wrote: > > Hi Everyone, > > I'm having trouble getting TrippLite SMX1500LCDT to work on FreeBSD > 11.2, nut 2.7.4 installed from FreeBSD port. > > The debug output is rather big when I'm starting usbhid-ups initially, > Please find that attached (gzipped to comply with message size

After "No device" error the driver does not seem to be able to communicate with the UPS (as seen before with the port build): # /usr/local/ups/bin/usbhid-ups -a ups -DDDD -u root Network UPS Tools - Generic HID driver 0.53 (v2.7.4-603-gb14c3b42.7.4.1) USB communication driver 0.37 0.000000 [D1] debug level is '4' 0.002560 [D1] upsdrv_initups... 0.002748

On Aug 19, 2018, at 3:03 PM, Valentin Merkulov <schnobel at ickis.net> wrote: > > Here is what I get: > > # usbconfig -u 1 -a 3 dump_curr_config_desc > ugen1.3: <Tripp Lite TRIPP LITE UPS> at usbus1, cfg=0 md=HOST spd=LOW > (1.5Mbps) pwr=ON (100mA) > [...] Hmm, that may be an issue on the NUT side, then. (You might see issues if you run those commands

OK, from this build I get the following: # /usr/local/ups/bin/usbhid-ups -a ups -DDDD Network UPS Tools - Generic HID driver 0.53 (v2.7.4-603-gb14c3b42.7.4.1) USB communication driver 0.37 0.000000 [D1] debug level is '4' 0.001299 [D1] upsdrv_initups... 0.001450 [D2] nut_libusb_open: checking device 1 of 1. 0.033333 [D2] nut_libusb_open: - VendorID: 09ae.

----- On Sep 23, 2015, at 9:26 AM, Charles Lepple clepple at gmail.com wrote: > On Sep 23, 2015, at 9:22 AM, Louis G. <louis at frentzgzesh.info> wrote: >> >> >Can you open up a root shell, kill the old `usbhid-ups` process, and run it from >> >the command line? >> > >> > /usr/local/libexec/nut/usbhid-ups -a ups -DDD >> > >>

Thx for the info Charles. Here is what I am seeing from 'usbconfig list' ugen0.1: <EHCI root HUB Intel> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE ugen1.1: <EHCI root HUB Intel> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE ugen0.2: <product 0x0024 vendor 0x8087> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE ugen1.2: <product 0x0024 vendor

On Aug 20, 2018, at 7:40 AM, Valentin Merkulov <schnobel at ickis.net> wrote: > > Attached are config.log and usbhid-ups output with -u root (gzipped). > Now driver output looks a lot like the one from port build. If memory serves, this was the sort of error we were seeing from 3016 devices on Linux: 0.154899 [D1] Path: UPS.PowerSummary.iManufacturer, Type: Feature,

On Feb 3, 2014, at 9:05 PM, Chris Duffy wrote: > Thx for the info Charles. > > Here is what I am seeing from > 'usbconfig list' [...] > ugen1.3: <USB UPS PPC> at usbus1, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON > > > The last line I guess is key. Unfortunately, it is not very unique: the vendor can pick the string "USB UPS PPC", but the drivers

>Just for grins, can you try adding "usb_set_altinterface" to the ups.conf section for your UPS, and see if that changes this part of the log? (That is, after "[upstl1300]"). Here is the output with the usb_set_altinterface?added to ups.conf or at least partially output because it keeps going in a loop. ? 46.820206???? Checking device (09AE/3016) (/dev/usb//dev/ugen0.5) ?

Understood about unplugging USB - others with the 3016 devices have proposed various methods with USB hubs that have per-port power switching, etc. to simulate unplugging. I am not a fan of the concept, but I recognize that others have made more significant investments than the single UPS that I bought. After you get access to the UPS, what if you try running the driver with

On Jan 31, 2014, at 3:14 PM, Chris Duffy wrote: > The current one I am looking is support for: > > Upsonic Commercial UPS CXR 2000 - 2000VA/1200W - Rack/Tower > > What seems to be supported in Freebsd is: Small clarification: the hardware compatibility list isn't broken down by operating system (theoretically, the drivers should work on any POSIX system, with additional

I am working with a number of our customers to ensure that NUT works with different UPS's on Freebsd 9.1. The current one I am looking is support for: *Upsonic Commercial UPS CXR 2000 - 2000VA/1200W - Rack/Tower* What seems to be supported in Freebsd is: CXR1000 blazer_ser LAN Saver 600 genericups upstype=0 Power Guardian genericups upstype=7 PrOffice 650 USB blazer_usb DS-800 USB

On Aug 20, 2018, at 1:03 AM, Valentin Merkulov <schnobel at ickis.net> wrote: > > 0.033412 [D3] nut_usb_claim_interface: failed to claim USB > device (Other error). > 0.033417 [D3] nut_usb_claim_interface: failed to detach kernel > driver from USB device (Other error). I am not as familiar with this branch (I mostly worked with the older libusb-1.0+0.1 branch

I cannot unplug/re-plug USB though, because currently I'm away from the hardware location. On Mon, Aug 20, 2018 at 4:07 PM, Valentin Merkulov <schnobel at ickis.net> wrote: > After "No device" error the driver does not seem to be able to > communicate with the UPS (as seen before with the port build):