similar to: Tripp Lite 1300LCDT

I am not sure if this is a polling/communication problem or not. Running NUT 2.7.4 Driver used usbhid-ups Driver version 2.7.4 Driver version internal 0.41 This is the information the driver is able to pull UPS status OL UPS model TRIPP LITE UPS Manufacturer Tripp Lite Vendor ID 09ae Product ID 3016 OS is FreeBSD/XigmaNAS v11.2 The issue is that for every 30sec that the driver is able to

If you'd like, shoot me over your serial number and the corner-cases you don't have answers for and I can look into it. Thank you, David Zomaya Tripp Lite david_zomaya at tripplite.com -----Original Message----- From: Nut-upsuser <nut-upsuser-bounces+david_zomaya=tripplite.com at alioth-lists.debian.net> On Behalf Of Ken Olum Sent: Tuesday, January 14, 2020 11:24 AM To: Layne

Will do. Ball in my court for now. Thank you, David Zomaya Tripp Lite<http://www.tripplite.com/> ________________________________ From: Tom Cooper <tom at cooperfamily.xyz> Sent: Wednesday, May 20, 2020 8:47:28 AM To: David Zomaya Cc: nut-upsuser Subject: Re: [EXTERNAL] Re: [Nut-upsuser] Help with Tripp Lite Internet600U That would be great. If there is something I can do to

I'm obviously biased but I like Tripp Lite stuff. I try to pitch in and help with Network UPS Tools issues related to Tripp Lite when I can too (albeit the developers and users on this list are usually more helpful than me). Just to confirm, it sounds like you are looking at the SU5000RT4UHV, correct?

Does the github link not come through (https://github.com/networkupstools/nut/issues/799)? All the documentation that Tripp-Lite sent me on the 2012 protocol and my configuration files are on that issue. I doubt this mailing list will allow me to attach any files. It's the NUT github page. At any rate ups.conf just has this in it. No offdelay or ondelay entries: [ups] driver =

I'm still working remotely, but I should be able to get something set up soon. I'll reply all here once I have something to report. Thank you, David Zomaya Tripp Lite<http://www.tripplite.com/> ________________________________ From: Tom Cooper <tom at cooperfamily.xyz> Sent: Wednesday, May 20, 2020 7:48:32 AM To: David Zomaya Cc: nut-upsuser Subject: Re: [EXTERNAL] Re:

Charles, thank you for that link to David's earlier message. I tried adding those udev rules and changing the pollinterval. I need to do some tinkering but I don't think the part RUN+="/sbin/upsdrvctl stop; /sbin/upsdrvctl start" is working right. If I manually run the commands then the USB disconnects stop and there are no kernel messages. Running "sudo /lib/nut/usbhid-ups

Re: "Does it work well with NUT?" Assuming it is the SU5000RT4UHV, the similar units I've tried seemed to work fine. For reference, the SU5000RT4UHV should be a 4004 USB protocol. ________________________________ From: David Zomaya Sent: Wednesday, March 25, 2020 5:21 PM To: Lee Damon; nut-upsuser Mailing List Subject: Re: [EXTERNAL] [Nut-upsuser] thoughts on tripp lite Smart

Thank's David, really appreciate your answer, and your time. Just a yes or a no, can I upgrade the firmware on this UPS ? Cheers jrb On Fri, Jan 3, 2020, 19:06 David Zomaya, <David_Zomaya at tripplite.com> wrote: > > After a quick glance, it looks like that older version of the INTERNET750U > supports only a few controls Shutdown of the inverter, cancelling that >

Ok thank's for your time David, the PSUs, I have two old ones, are working very well. I simply put in new batteries and on they go :-). I'm using the PSUs mostly to secure my Raspberry PIs, which are notorious to fail (SD card) on power failures. Bye, jrb. On Fri, Jan 3, 2020 at 7:35 PM David Zomaya <David_Zomaya at tripplite.com> wrote: > > Hi Jean-Roch, > No. There is no

On 12/8/19 8:18 PM, David Zomaya wrote: > > I haven't tried it on RaspberryPi, but if there's some specific Tripp > Lite information I can help with, let me know. > We had that discussion about the SMART1500LCDT  & USB a long time ago:-( I bought mine in 2013 (still going strong on the second set of batteries) and in August 2016 we had some discussions about the USB

Thanks. Looks like an older SKU, so I'll look into it when I am back in the office later this week. ________________________________ From: Jean-Roch Blais <blaisjeanroch at gmail.com> Sent: Tuesday, December 31, 2019 8:04:34 PM To: David Zomaya Cc: nut-upsuser at alioth-lists.debian.net Subject: Re: [EXTERNAL] [Nut-upsuser] Tripp Lite INTERNET750U instant commands ? Hello List, David:

Hi Mauel, No dice. The config does not show up config: --8<-- [tripp] driver = usbhid-ups port = auto vendorid = 09ae productid = 2009 bus = 001 desc = "Tripp Lite SMX1000LCD" runtimecal = 660,100,180,50 -->8-- output: --8<-- upsc tripp Init SSL without certificate database battery.charge: 100 battery.runtime: 736 battery.type: PbAc

Others on the list may have quicker answers, but I can look into this a bit when I am back in the office. What driver are you using? Can you provide the SKU portion of your serial number? https://www.tripplite.com/support/identify-products <https://www.tripplite.com/support/identify-products> Thank you, David Zomaya Tripp Lite ________________________________ From: Nut-upsuser

David, That's exciting - but I am not seeing similar results.  I *must* be doing something dumb - but I can't see it. I've got nut-2.7.4-8 installed on my pi Hope you can help. Tom pi at elmer:/home/macbackup $ lsusb | grep ipp Bus 001 Device 004: ID 09ae:3024 Tripp Lite pi at elmer:/home/macbackup $ sudo cat /etc/nut/nut.conf # Network UPS Tools: example nut.conf #

Hi all, I'm from Tripp Lite. Many of our smaller standby and line-interactive have recently changed from 20xx protocol numbers to 302x protocol numbers. This has caused issues for a few people on the users mailing list, for example: https://alioth-lists.debian.net/pipermail/nut-upsuser/2020-June/011876.html https://alioth-lists.debian.net/pipermail/nut-upsuser/2020-June/011878.html

David, I appreciate the quick feedback! If I didn't fat finger any of the parameters you sent me, it's still not working. Here's the output from the attempt to start.  (BTW - nothing appears in the daemon.log when I use the upsdrvctl command.) pi at elmer:/home/macbackup $ sudo vi /etc/nut/nut.conf pi at elmer:/home/macbackup $ sudo vi /etc/nut/ups.conf pi at

Funny - I thought of that  and had tried it.  Didn't work I also moved it from the USB2 ports to the USB3 ports. Same result. I have not heard of udev, but after quick googling and glancing at an example, /etc/udev/rules.d/99-com.rules I am not convinced that I coule come up with a formula to make a working rule. Is there a simple sample I can copy to help figure out elevated

I'm running Raspbian Buster, but given that the error seems to be "higher order" than a hardware issue - one of parsing the protocol?  I suspect that Ubuntu would be a decent "lookalike" to model the issue.  ---- On Tue, 19 May 2020 22:31:56 -0400 David Zomaya <David_Zomaya at tripplite.com> wrote ---- If I installed and tested against Ubuntu, how useful would

Sorry, neglected to mention: You'll need to either reload the udev rules or reboot to make the new rule "active". Thank you, David Zomaya Tripp Lite ________________________________ From: David Zomaya Sent: Wednesday, May 20, 2020 2:11:24 PM To: Tom Cooper Cc: nut-upsuser Subject: Re: [POSSIBLE FRAUD] Re: [Nut-upsuser] [EXTERNAL] Re: Help with Tripp Lite Internet600U