similar to: Apple iMac OS X 10.13.5 | Powershield Defender 1200 UPS

I got my USB ups reporting on macOS, but it was quite a while ago, I’ll have to dig into how I did it.. I do remember is wasn’t simple.. ( actually is was long drawn out pain in the …. ) Maybe search for posts from me, I’ll check what I did on the weekend and get back to you.. Or, buy an APC.. as they will just appear in Energy Saver.. > On 6 Jun 2018, at 15:41, Charles Lepple

On Jun 6, 2018, at 5:18 AM, Walter HILL <hill at ieee.org> wrote: > > Does anyone know of a relatively recent guide to getting this UPS > running on a newer version of OS X? I am aware that Apple have been > re-engineering their startup process so I expect that getting the driver > to work may be the least of my problems. > To be honest, I have not seen much demand for

Hi Team, I've been experimenting with getting the PowerShield Defender 1200VA UPS working and it appears to be supported by the blazer_usb driver, although it did not have the correct permissions within udev to load the driver as the non-root user after an RPM install on Fedora Core 16. [root at localhost ~]# lsusb ... Bus 006 Device 005: ID 0665:5161 Cypress Semiconductor USB to Serial

Hi, Sometime ago I asked the question about getting nut to run on my iMac as I was having trouble getting the USB driver to behave with OS X. The same driver under LINUX is fine. It was suggested that the better option might be to run nut on a Rasberry PI instead and monitor the nut daemon from the iMac. Well I have bought a Rasberry PI, I have other things planned for it. I have installed nut

Hi, Can anyone help me out re how I change the startup options for mysql (v5.0) running on my Mac? (I just want to add the "--log" option is about it). I tried doing "sudo ./Library/StartupItems/MySQLCOM/MySQLCOM restart" however this started a 2nd instances of mysql & mysqld. Here is what I see start after Mac startup if this helps: $ ps aux | grep mysql _mysql 137 0.0

I've got tinc running happily on a couple linux and win computers, but no luck on OS X. I'm on Yosemite 10.10.5, and I think I followed the OS X tutorial exactly, but no luck. Here's my error message: > sudo tincd -n dpsf -D -d3 tincd 1.0.21 (Feb 3 2015 20:09:36) starting, debug level 3 Could not open /dev/tun0: No such file or directory Terminating And here's the contents

> kextload /Library/Extensions/tun.kext/ I didn't have a /Library/Extensions/tun.kext/ on my machine. I googled around, and downloaded and installed from http://tuntaposx.sourceforge.net/. Not sure why the macports install didn't work, but it seems I'm making progress. Now I get this: > sudo tincd -n dpsf -D -d3 tincd 1.0.21 (Feb 3 2015 20:09:36) starting, debug level 3

Hi, Sometime ago [ June 2018 ] I posted a message about getting trying to get NUT to work with a Power Shield Defender 1200VA UPS. This model appears in the HCL at https://networkupstools.org/stable-hcl.html That UPS reported the following when queried using 'lsusb' on an iMac running macOS [ 10.15 ] Bus 001 Device 008: ID 0665:5161 Cypress Semiconductor USB to Serial Device Descriptor:

Is there a particular reason why we are setting the alternate interface to 0 in drivers/libusb.c? I have seen some documentation which indicates that this should already done by the OS when the device is enumerated. If that is the case, then there is no reason why we should hardcode the alternate interface to 0. If I remove the following code, tripplite_usb seems to work*:

Hi All, I just upgraded to the new 1.1rc5 from 1.0 that I had been using and it advised me to increase the file descriptor limit. I'm not sure how to do this. There is a command built into tcsh that allows me to do this called limit, but sudo limit 4224 doesn't work, and usually dovecot is started from the rc.local file if I recall right, and I'm not sure how to set this up from

Thanks very much! It's alive! For others who are having problems, this is a summary of the differences I needed between Linux and OS X: You'll need to install http://tuntaposx.sourceforge.net/ manually. On tinc.conf: > Linux Name = ntwigg2014linux AddressFamily = ipv4 Interface = dpsfVPN ConnectTo = dpserver001 > Mac Same, but remove the Interface line entirely On tinc-up: >

Just downloaded Black Ice Defender for Ubuntu Linux, and I'm opening it up with wine, I get to the final stage of the Installation and i would get this error ( Failed to load dll: ICEinstallNT.dll ) Any help please?

Hi Charles, I am using the same configs as I have in Linux Mint. What do I need to change here? ups.conf [defender] ??? driver = blazer_usb ??? port = auto ??? pollinterval = 5 ??? desc = "PowerShield Defender 650" upsd ??? default.battery.voltage.high = 13.70 ??? default.battery.voltage.low = 10.40 upsd.users [local_mon] ??? ??? password = ******** ??? ??? allowfrom =

On Jun 11, 2017, at 7:15 AM, Robbie van der Walle <rvanderwalle at gmail.com> wrote: > > I see only a reboot. Not a shutdown. But is this normal because shutdown -u -h +0 is used? > To be honest, I haven't experimented much with this, but I saw a normal shutdown/reboot when I just tried this from the command line (10.12): reboot ~ Mon Jun 12 08:36

On Mar 7, 2020, at 2:02 AM, HILL Walter <hill at ieee.org> wrote: > > idVendor 0x0665 Cypress Semiconductor > idProduct 0x5161 USB to Serial [...] > N.B. the Product ID and Vendor ID are unchanged between the two models > despite the fact that they function and operate quite differently. > Thanks for the information - sorry to hear you are dealing

Hi Charles, Thanks for your help. Seems to be mostly ok except am getting error access denied. See below. I see from searching this is a common error but so far I can't find a fix. This is how I configured things before make and install. created group nut nut:x:103: created system user ups with group nut. ups:x:123:103::/home/ups:/bin/bash Create statepath directory. sudo mkdir -p

Hi list, I?ve spend a LOT of time reading and trying many versions, from Fink to Brew and also compiling source. OSX 10.11.3 NUT: v2.7.4 Driver: nutdrv_atcl_usb I have the same problem that has been reported, that Mac OSX grabs the USB device so NUT can?t use it. 0.001924 Starting UPS: UDups 0.001956 1 remaining attempts 0.001966 exec: /sw/lib/nut/nutdrv_atcl_usb -a UDups -u root

G'day, New toy, came with bundled software which is non-free, so I'm looking at whether NUT can be convinced to play with the toy. I've never used NUT before. OS name and version: Ubuntu 10.10 exact NUT version: 2.4.3-1ubuntu5 NUT installation method: Ubuntu package nut exact device name and related information: PowerShield Centurion 2000

Is it possible to create a Startup Item for WEBrick? My startup item, named swu, works fine when I run it from the command line, just not when the computer is starting up. I''m wondering if some resources are missing for ruby to load at this point... or something. Here''s output from /var/log/system.log... Any suggestions would be appreciated. Aug 18 21:18:58 localhost

I deleted the plist file and rebooted: sudo /sw/sbin/upsmon -D Network UPS Tools upsmon 2.7.4 0.000000 fopen /sw/var/run/upsmon.pid: No such file or directory 0.044649 UPS: ups at ip address (slave) (power value 1) 0.081597 Using power down flag file /etc/killpower 0.162720 debug level is '1' 0.538410 Trying to connect to UPS [ups at ip address] 0.540345 Logged into UPS