similar to: Default value for ondelay

Hello there. Have been experimenting with an APC Smart-UPS 1500 RM and would like to share the results of my research. I hope this could be of help to people having this kind of units. I would also like to give something back to the NUT community. :) Here are the details of the unit in question (a 1500 VA rack mountable one): Model: Smart-UPS 1500 RM Firmware revision: 617.3.I USB firmware

Hi, I have the Eaton 5E850iUSBDIN UPS connected via USB to a Raspberry Pi 3B+. It seems that everything but the ondelay parameter works so far. when I test the setup with this command: upsmon -c fsd The NUT server makes the NUT clients shut down properly and the Raspberry Pi running the NUT server shuts down correctly too. The problem is that after UPS shuts down, it immediatelly brings the

Are there plans to change the default offdelay/ondelay for the Windows versions of NUT since it can't be invoked at the end of shutdown? E.g. I have a Win2k3 server that takes just over 4min to shut down, so I set my offdelay to 600 (ondelay is +15 that) to be extra safe. Maybe a 2 min by default would be good? Most (all?) APC non-smart UPS's are hard-coded at an annoying 1min delay,

Thanks On Sat, 16 Mar 2024 at 18:57, Charles Lepple <clepple_at_gmail.com_chribonn at duck.com> wrote: > > On Mar 14, 2024, at 11:41?AM, Alan via Nut-upsuser <nut-upsuser at alioth-lists.debian.net> wrote: > > > Hi, > > > > My Cyber Power reports these two values. Each pair has the same value. > > > > Would they normally be the same thing? >

Angel Tsankov wrote, On 12/6/2013 12:31 PM: > Hello, Ren?. > >> You can change the parameter >> ups.delay.start into your UPS to set the "Interval to wait before >> (re)starting the load (seconds)" >> >> use upsset to change the value. > > So far, the ups.delay.start parameter in my MGE Protection Center 675 > has always been equal to the

2018-02-28 21:11 GMT+01:00 Jairo Rotava <jairo.rotava at gmail.com>: > Hello, > > I think that on this file nutdrv_qx_megatec.c the definition for > shutdown.stayoff may be wrong. In the file the definition is "S%sR0000\r"m > while on the megatec protocol description ( > http://networkupstools.org/protocols/megatec.html) the command is just > "S%s\r".

Hi! I have a MGE Pulsar ES 8+ UPS. Here is the response of some commands: - Si --> 3000 44 0 - Si 1 --> Pulsar ES8+ 0 - Ai --> 5 0 It's not recognized very well by the current (from CVS) mge-utalk driver: [root@srv01 ~]# /home/rog/src/nut/drivers/mge-utalk -i 20 -DDD -u root /dev/ttyS0 Network UPS Tools - MGE UPS SYSTEMS/U-Talk driver 0.86 (2.1.0) debug level is '3'

Thanks for help! Are you happy with your Eaton Elipse ECO 1600? Does it work well with ondelay? I will need some UPS that supports the ondelay parameter. Bartosz śr., 10 kwi 2019 o 13:06 Roger Price <roger at rogerprice.org> napisał(a): > On Wed, 10 Apr 2019, Bartosz wrote: > > > I don't see ups.delay.start anywhere. Here is the output of upsrw: > > > > upsrw

I'm trying to better understand OffDelay and OnDelay: http://networkupstools.org/docs/man/usbhid-ups.html#_extra_arguments My server requires ~3? minutes to shut itself down. Considering this I'm comfortable setting OffDelay to 300 (five minutes). How does this work in conjunction with the UPS hardware? Does NUT immediately send a command to the UPS to wait for 300 seconds and then shut

Welcome, Acctualy, I'm try to poweroff my ESXi (6.7). Virtual machine with Ubuntu and redirected USB port with APC Back UPS CS 650, have nut-server and send info to ESXi. When battery is low, ESXi poweroff gracefully all VM and same ESX go down. This work fine and don't have any problem. But important to me, is set to more offdelay on UPS than the default 60 sec. (cut off power socket

On Oct 3, 2018, at 8:13 PM, Gabriel <jarod125 at gmail.com> wrote: > > On Tue, Oct 2, 2018 at 3:59 PM Charles Lepple <clepple at gmail.com> wrote: >> >> On Sep 27, 2018, at 6:59 PM, Gabriel <jarod125 at gmail.com> wrote: >>> >>> Hi, >>> >>> I'm struggling with a peculiar issue with my UPS. After a power >>>

BTW, does it have passive cooling? Bartosz śr., 10 kwi 2019 o 16:53 Bartosz <bartoszmail at gmail.com> napisał(a): > Thanks for help! > Are you happy with your Eaton Elipse ECO 1600? > Does it work well with ondelay? > I will need some UPS that supports the ondelay parameter. > Bartosz > > śr., 10 kwi 2019 o 13:06 Roger Price <roger at rogerprice.org> napisał(a):

On Wed, 5 Oct 2016, Jeff Bowman wrote: > I?m trying to better understand OffDelay and OnDelay: > http://networkupstools.org/docs/man/usbhid-ups.html#_extra_arguments > > My server requires ~3? minutes to shut itself down. Considering this I?m > comfortable setting OffDelay to 300 (five minutes). > > How does this work in conjunction with the UPS hardware? Does NUT >

On Tue, Oct 2, 2018 at 3:59 PM Charles Lepple <clepple at gmail.com> wrote: > > On Sep 27, 2018, at 6:59 PM, Gabriel <jarod125 at gmail.com> wrote: > > > > Hi, > > > > I'm struggling with a peculiar issue with my UPS. After a power > > outage, the devices powered by it properly shut down via nut. > > Eventually, the UPS also goes down.

Does the github link not come through (https://github.com/networkupstools/nut/issues/799)? All the documentation that Tripp-Lite sent me on the 2012 protocol and my configuration files are on that issue. I doubt this mailing list will allow me to attach any files. It's the NUT github page. At any rate ups.conf just has this in it. No offdelay or ondelay entries: [ups] driver =

>> [Roger wrote:] >>> By the way, do you have offdelay and ondelay values in your ups.conf ? >> >> No, I haven’t. I just added. Should I add more lines here? >> >> maxretry = 3 >> >> [ups] >> driver = usbhid-ups >> port = auto >> desc = "CPS" >> pollinterval = 15 >Yes, ondelay

Hi, I try to install the newhidups driver for a MGE Pulsar M2200 connected to a USB port under Linux Red Hat 4 Upd 4. I have compiled and installed the usb driver (make usb && make install-usb). I followed the instructions in /nut-2.0.5/scripts/hotplug-ng/README abour the /etc/udev/rules.d/025_nut-usbups.rules. The ups is recognized by the kernel: Mar 12 14:52:03 serveur1 kernel: usb

Hi, I try to install the newhidups driver for a MGE Pulsar M2200 connected to a USB port under Linux Red Hat 4 Upd 4. I have compiled and installed the usb driver (make usb && make install-usb). I followed the instructions in /nut-2.0.5/scripts/hotplug-ng/README abour the /etc/udev/rules.d/025_nut-usbups.rules. The ups is recognized by the kernel: Mar 12 14:52:03 serveur1 kernel: usb

On Wed, 10 Apr 2019, Bartosz wrote: > BTW,does it have passive cooling? In the sense that there is no fan, The Eaton Ellipse ECO 1600 has passive cooling. It gets warm but not hot. > Are you happy with your Eaton Elipse ECO 1600? Does it work well with ondelay? "ECO" means that it does not have "buck and boost" or a fancy control panel. I replace my batteries

> When a UPS unit performs a delayed power off (NUT sets the delay to 20 seconds > by default) it deconnects its power outlets which in some UPS units produces an > audible "clunk". The display of lights on the front panel changes, and the > beeping stops. The delayed power off can be demonstrated with a light bulb or a > mains circuit tester connected to one of the