similar to: Copeland Engineering Dockmaster

Thank you - I have included the capture, and attached it here. USB is new to me. I am a good sysadmin, but terrible programmer. I was able to use the usbhid-dump utility using -e stream, the last octet will report the state of the detected power (1/2 for ignition on, 3 for ignition off, 0 for powered-off). 4th one seems to be voltage, and the 5th and 6th I believe are timers:

On Feb 23, 2017, at 2:55 PM, Drew from Zhrodague <drewzhrodague at zhrodague.net> wrote: > > Thank you - I have included the capture, and attached it here. USB is new to me. I am a good sysadmin, but terrible programmer. > > I was able to use the usbhid-dump utility using -e stream, the last octet will report the state of the detected power (1/2 for ignition on, 3 for

On Feb 21, 2017, at 10:21 AM, Drew from Zhrodague <drewzhrodague at zhrodague.net> wrote: > > > Hello! I have a Dockmaster from Copeland Engineering. This is a battery saver used for a laptop docking station in a police car, which has a USB port for relaying its internal timers and state. > > hid-generic 0003:04D8:0500.0001: hiddev0,hidraw0: USB HID v1.10 Device [Copeland

On 3/2/17 10:02 AM, Charles Lepple wrote: > Can you provide a pointer to details on the usbhid-dump tool? Not > familiar with that one. I'm using Ubuntu 14.04 Server on an i686 Dell/Wyse CX0 thin-client - usbhid-dump was available as part of usbhid-utils, if I am not mistaken. https://github.com/DIGImend/usbhid-dump > Depending on how much of the Power Device Class (PDC) HID

[moved to nut-upsdev while we figure out the protocol] > On Mar 9, 2017, at 11:22 AM, Drew from Zhrodague <drewzhrodague at zhrodague.net> wrote: > > I'm able to cat /dev/usb/hiddev0 and /dev/hidraw0 - I pipe this through hexdump and I get different types of data from each: > > > hiddev: > > 0002420 00a7 ffa0 00ff 0000 00a7 ffa0 00ff 0000 > 0002430 00a7

On Mar 19, 2017, at 10:56 AM, Drew from Zhrodague <drewzhrodague at zhrodague.net> wrote: > > [] I've spoken with one of the developers, and he's offered to share some technical documentation with me. I'll report here with whatever I can. He's on vacation in China. Hopefully this documentation will lead to fewer surprises down the road. > [] I found this

On 3/11/17 9:15 AM, Charles Lepple wrote: > [moved to nut-upsdev while we figure out the protocol] > >> On Mar 9, 2017, at 11:22 AM, Drew from Zhrodague <drewzhrodague at zhrodague.net> wrote: >> >> I'm able to cat /dev/usb/hiddev0 and /dev/hidraw0 - I pipe this through hexdump and I get different types of data from each: >> > I was trying to reconcile

Drew, Another thing to consider is the NUT driver documentation. This is the template, but since it originally predated the USB drivers, feel free to draw on the other man pages for inspiration: https://github.com/networkupstools/nut/blob/master/docs/man/skel.txt - Charles

Hello, We had an incident recently where a call was in queue for an extended period of time. We use queuemetrics for reporting, and it reports that the call was waiting for 20 minutes. The different thing about it is that the disconnect reason is stated as Timeout. Is there a set maximum time a call will wait in the queue before being automatically disconnected? I tried looking through the code

As part of a project to move a clients Cisco phones to SIP to work with an Avaya system, I'm taking a Cisco 7961 we bought and adding it to our Asterisk setup. Now, I've gotten the firmware files from the site, the latest version is 8.4 which contains the following files: apps41.8-4-3-16.sbn cnu41.8-4-3-16.sbn cvm41sip.8-4-3-16.sbn dsp41.8-4-3-16.sbn jar41sip.8-4-3-16.sbn

Is it possible to configure libvirt to generate "predictable" MAC addresses for virtual NICS? (A configuration which accomplishes this by limiting the pool of available addresses would be acceptable for my use case.) Read on for why I want to do this ... I have a somewhat unusual use case. I am working with the OpenShift bare metal "IPI" installation process, which is

I currently have 3 tables/models: 1) Clients, 2) Charges, and 3) Court_Dates. Clients 1..n Charges 1..n Court_Dates I am trying to find all clients that have a court_date on a certain day: something along the lines of (@client.charge.court_date.date == Date.today). I have had success preloading child rows using the :include parameter, but that only works with a parent and a child, or a

Support Requests item #1813, was opened at 2005-04-20 23:48 You can respond by visiting: http://rubyforge.org/tracker/?func=detail&atid=412&aid=1813&group_id=85 Category: None Group: None Status: Open Resolution: None Priority: 5 Submitted By: Tom Copeland (tom) Assigned to: Nobody (None) Summary: Merely a test Initial Comment: Hm, did this go to to win32utils-devel? Tom

Anyone know how to restore a Wiki other than manually? Nick

Hello, I'm supporting an Asterisk setup in the Cayman Islands(I'm in Canada), which is running a PRI to a local telecom provider. We are looking at improving the setup, setting up high availability etc. My manager is interested in putting a TDMOE device in place, so we can easily switch the line remotely. He's looking at the following device:

Hi All, I'm confused! My Asterisk system has a Zap trunk and three SIP trunks. I'd like to configure the dialplan to route via the first trunk in a list and if that's not available or it's busy, fall over to the second, then to the third, etc. AIUI Dial(Zap/1&SIP/out1&SIP/out2/${EXTEN}) rings all the trunks in the list and bridges to the first to answer. Unfortunately,

Does anyone know of a way to force the voicemail password for users to be of a certain length? We've setup operator=yes within our voicemail.conf and want to have the users use a long password to prevent possible guessing by external parties. I'm not seeing any such option in my research. If it doesn't exist it might be a decent feature. Thanks. Running: 1.4.25, on CentOS 4.7

Hi all R users I did a logistic regression with my binary variable Y (0/1) and 2 explanatory variables. Now I try to draw my nomogram with predictive value. I visited the help of R but I have problem to understand well the example. When I use glm fonction, I have a problem, thus I use lrm. My code is: modele<-lrm(Y~L+P,data=donnee) fun<- function(x) plogis(x-modele$coef[1]+modele$coef[2])

Sorry to trouble the list with this question... Do many rails developers run or test rails apps on godaddy hosted servers? Is there any documentation (outside of what godaddy provides) about uploading and testing rails apps there? Perhaps someone has written a tutorial? I googled, but found little to no info about it other than the sparse godaddy docs. Thanks!

The DDRdrive X1 OpenSolaris device driver is now complete, please join us in our first-ever ZFS Intent Log (ZIL) beta test program. A select number of X1s are available for loan, preferred candidates would have a validation background and/or a true passion for torturing new hardware/driver :-) We are singularly focused on the ZIL device market, so a test environment bound by synchronous writes