similar to: Unable to find driver for a supported device

# usbconfig -d ugen0.2 dump_device_desc ugen0.2: <TRIPP LITE SMART1500RMXL2Ua TRIPP LITE> at usbus0, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON (60mA) bLength = 0x0012 bDescriptorType = 0x0001 bcdUSB = 0x0110 bDeviceClass = 0x0000 <Probed by interface class> bDeviceSubClass = 0x0000 bDeviceProtocol = 0x0000 bMaxPacketSize0 = 0x0008 idVendor = 0x09ae idProduct = 0x0001

Alright. Sorry to bother you guys. Apparently after I rebooted the box, it started working now on the tripplite-usb driver. One correct also. I didn't have it installed from ports but from binary pkg. (pkg install nut) I doubt this did anything but I did create nut.conf because it wasn't there before. I set it to standalone. Again, sorry to bother you guys. I'm retarded. Nick

> On Oct 11, 2016, at 1:35 PM, Nick Teague <nick.teague at smartfox.us> wrote: > > ugen0.2: <TRIPP LITE SMART1500RMXL2Ua TRIPP LITE> at usbus0, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON (60mA) To determine the proper driver, would you please run the following usbconfig command as root? Here's an example from my UPS: # usbconfig -d ugen0.2 dump_device_desc ugen0.2:

I am having problems with mouse, keyboard and APC UPS. When attempting to start apcupsd I get the following error: Jan 8 17:42:06 Ace apcupsd[1606]: apcupsd FATAL ERROR in generic-usb.c at line 636 Cannot find UPS device -- For a link to detailed USB trouble shooting information, please see <http://www.apcupsd.com/support.html>. Jan 8 17:42:06 Ace apcupsd[1606]: apcupsd error shutdown

Thx for the info Charles. Here is what I am seeing from 'usbconfig list' ugen0.1: <EHCI root HUB Intel> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE ugen1.1: <EHCI root HUB Intel> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE ugen0.2: <product 0x0024 vendor 0x8087> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE ugen1.2: <product 0x0024 vendor

I am working with a number of our customers to ensure that NUT works with different UPS's on Freebsd 9.1. The current one I am looking is support for: *Upsonic Commercial UPS CXR 2000 - 2000VA/1200W - Rack/Tower* What seems to be supported in Freebsd is: CXR1000 blazer_ser LAN Saver 600 genericups upstype=0 Power Guardian genericups upstype=7 PrOffice 650 USB blazer_usb DS-800 USB

On Jan 31, 2014, at 3:14 PM, Chris Duffy wrote: > The current one I am looking is support for: > > Upsonic Commercial UPS CXR 2000 - 2000VA/1200W - Rack/Tower > > What seems to be supported in Freebsd is: Small clarification: the hardware compatibility list isn't broken down by operating system (theoretically, the drivers should work on any POSIX system, with additional

Here are all the usbconfig outputs you have requested. I have left a message with the Dev for NAS4Free to give up the ./configure for NUT portion.? I am hoping they will... usbconfig -u 0 -a 5 dump_device_desc? datanas: ~# usbconfig -u 0 -a 5 dump_device_desc ugen0.5: <TRIPP LITE UPS Tripp Lite> at usbus0, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON (100mA)? bLength = 0x0012 ? bDescriptorType =

Dear Charles, thanks for your quick answer and your information! I didn't know there is a difference in the PR-series between old and new. So thanks for this valuable information! usbconfig dump_device_desc shows: ugen0.2: <CyberPower Systems product 0x0601> at usbus0, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON (50mA)

> What does that revision number correspond to in FreeBSD release numbers? (e.g. 9.3, 10.0) FreeBSD 10.2-RELEASE #0 r286738M the last person probably wasn't able to give the ./configure probably because most people uses the precompiled iso to install NAS4Free.? if you need the ./configure I might have to look for their source on GitHub or something. /usr/local/libexec/nut/usbhid-ups -a

Hey guys, :) recently, I installed Cyberpower PR2200ELCDRT2U, however, I have not managed to get this UPS working with FreeNAS 11, yet. According to compatibility list, PR2200 should work fine, when using powerpanel driver: http://networkupstools.org/ddl/Cyber_Power_Systems/ http://networkupstools.org/ddl/Cyber_Power_Systems/PR2200.html However, when trying to establish a connection between

On Feb 3, 2014, at 9:05 PM, Chris Duffy wrote: > Thx for the info Charles. > > Here is what I am seeing from > 'usbconfig list' [...] > ugen1.3: <USB UPS PPC> at usbus1, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON > > > The last line I guess is key. Unfortunately, it is not very unique: the vendor can pick the string "USB UPS PPC", but the drivers

Hello I am using Freenas 11.3 (freebsd like) with a GREENCELL usb ups. with nut 2.7.4_13 pre installed But, this ups is not detected as "blazer_usb" on port "auto" neither "ugen0.4"! Network UPS Tools - UPS driver controller 2.7.4 Network UPS Tools - Megatec/Q1 protocol USB driver 0.12 (2.7.4) No supported devices found. detail below. Another info : This

Three different external hard drives (Seagate, Western Digital and noname USB 3.0 enclosure) refused to be recognized as the umass devices. Reverting /usr/src/sys/dev/bsd/controller to r248085, building and loading just xhci module makes drives appear again. Below are snippets from the log in both cases: Non working: Jul 4 14:35:17 twinhead kernel: xhci0: <XHCI (generic) USB 3.0

Hi all, I’m new to NUT and have some trouble getting my new UPS to work. Since the HCL listed Powercom UHID models as „green“ I thought buying a Roline (German rebranded Powercom) model would be a good idea. The OS is FreeBSD: FreeBSD freenas-pmh.local 11.2-STABLE FreeBSD 11.2-STABLE #0 r325575+6aad246318c(HEAD): Mon Jun 24 17:25:47 UTC 2019 root at

Hello all! Some days ago we received new UPS?Powercom BNT-2000AP with USB interface to replace an old staff and I've spent four last days trying to connect it with NUT. I have a FreeBSD 8.4 box with NUT 2.7.2. # dmesg|grep -i powercom ugen0.3: <POWERCOM Co.,LTD> at usbus0 uhid0: <POWERCOM Co.,LTD HID UPS Battery, class 0/0, rev 1.10/0.01, addr 3> on usbus0 uhid0: <POWERCOM

I'm sure I'm missing something, but I can't seem to get NUT working on FreeBSD. bryce at tahiti[/usr/local/etc/nut]>cat ups.conf [belkin] driver = usbhid-ups port = auto vendorid = 050d #productid = 0751 bryce at tahiti[/usr/local/etc/nut]>s /usr/local/libexec/nut/usbhid-ups -DDDDD -a belkin Network UPS Tools - Generic HID driver 0.34 (2.4.1) USB communication driver 0.31

Attached are config.log and usbhid-ups output with -u root (gzipped). Now driver output looks a lot like the one from port build. On Mon, Aug 20, 2018 at 1:42 PM, Charles Lepple <clepple at gmail.com> wrote: > On Aug 20, 2018, at 1:03 AM, Valentin Merkulov <schnobel at ickis.net> wrote: >> >> 0.033412 [D3] nut_usb_claim_interface: failed to claim USB >>

Nice! it seems to works. Later this evening when I'll be back to my home I'll try to unplug the power chord from my ups. Apr 3 14:08:11 archivio notifier: nut not running? (check > /var/db/nut/upsd.pid). > Apr 3 14:08:11 archivio notifier: nut_upsmon not running? (check > /var/db/nut/upsmon.pid). > Apr 3 14:08:11 archivio notifier: nut_upslog not running? (check >

Hello all. I have a supermicro 16 bay box with a LSI 9211-8i card. We use it for temp data storage, and we wanted to try the l4z compression. After updating the source tree to r247839: and doing a make buildworld cycle all works fine. But at boot time we get some warnings. make_dev_physpath_alias: WARNING - Unable to alias gptid/281951f4-a996-11e1-83eb-00259061b51a to enc at