similar to: Use nut to handle shutdown when using local Li-io battery (Cubietruck)

Hi, ok, had this in mind but hoped for a driver for these "standard" linux possibilities :-) I will try it. But would it not be an idea to have a gerneric "linux" driver for nut? Ingo Fischer Am 15.09.16 um 13:32 schrieb Charles Lepple: > On Sep 15, 2016, at 7:19 AM, Ingo Fischer wrote: >> >> Or is there a generic driver that maybe uses a formatted textfile,

On Sep 15, 2016, at 7:19 AM, Ingo Fischer wrote: > > Or is there a generic driver that maybe uses a formatted textfile, so I > could write the data in a defined format file every x Minutes or such ... > I was not able to find something like this so far. You can do this with the "dummy-ups" driver: http://networkupstools.org/docs/man/dummy-ups.html

On Tue, Dec 09, 2014 at 04:59:33PM +0000, Richard W.M. Jones wrote: > On Tue, Dec 09, 2014 at 05:48:04PM +0100, Kashyap Chamarthy wrote: > > On Tue, Dec 09, 2014 at 11:27:02AM +0000, Richard W.M. Jones wrote: > > > On Tue, Dec 09, 2014 at 10:53:41AM +0000, Peter Maydell wrote: > > > > On 9 December 2014 at 10:50, Kashyap Chamarthy <kchamart@redhat.com> wrote:

[CCing the libguestfs mailing list - as Rich responded on IRC about your question on timeout.] On Sun, Feb 21, 2016 at 10:07 PM, Thomas Kee <xsited@yahoo.com> wrote: > Hi Kashyap, > > Thanks for offering to help. The day job caused a pause and it took me an > hour to reassert where I was in the process. I usually hang out on freenet > as xsited. I am still reading the

On Tue, Dec 09, 2014 at 05:48:04PM +0100, Kashyap Chamarthy wrote: > On Tue, Dec 09, 2014 at 11:27:02AM +0000, Richard W.M. Jones wrote: > > On Tue, Dec 09, 2014 at 10:53:41AM +0000, Peter Maydell wrote: > > > On 9 December 2014 at 10:50, Kashyap Chamarthy <kchamart@redhat.com> wrote: > > > > Booting a minimal KVM guest throws the below error on Cubietruck: >

On Mon, Feb 22, 2016 at 12:59:47PM +0100, Kashyap Chamarthy wrote: > > root@cubietruck:~# /usr/bin/libguestfs-test-tool -V > > libguestfs-test-tool 1.30.6 [...] > > [00633ms] /usr/bin/qemu-system-arm \ > > -global virtio-blk-device.scsi=off \ > > -nodefconfig \ > > -enable-fips \ > > -nodefaults \ > > -display none \ > >

Hi, I am using the NUT Software 2.7.4 (Ubuntu Repository) on Ubuntu 18.04. Configuring a UPS with the snmp-ups driver and overriding the battery.runtime.low variable leads to following warnung/error: Sep 23 11:10:08 hostname snmp-ups[27115]: dstate_setflags: base variable (battery.runtime.low) is immutable Default for battery.runtime.low is 180 seconds. My idea is to increase the value to

On Jan 21, 2015, at 9:15 AM, Sebastian Hosche <sebastian.hosche at web.de> wrote: > Hi there, > > I just purchased a CyberPower BR850ELCD and while setting NUT up with the install instructions from the homepage was pretty straightforward, and the UPS was detected by the usbhid-ups driver, I'm having problems getting the UPS to work properly. > > First issue: whatever I

Hi Charles, Thanks so much for your quick and detailed reply! I've added my answers and details inline. On 22.1.2015 04:46, Charles Lepple wrote: > On Jan 21, 2015, at 9:15 AM, Sebastian Hosche <sebastian.hosche at web.de> > wrote: > >> First issue: whatever I set as the offdelay, seems to be ignored and >> the UPS just cuts the power about 2sec after receiving

Hi there, I just purchased a CyberPower BR850ELCD and while setting NUT up with the install instructions from the homepage was pretty straightforward, and the UPS was detected by the usbhid-ups driver, I'm having problems getting the UPS to work properly. First issue: whatever I set as the offdelay, seems to be ignored and the UPS just cuts the power about 2sec after receiving the

Hi NUT-Team, I have an effekta MKD1000 USV and I want to connect with NUT over serial device to this USV.I have used blazer_ser as driver but I cannot get a connection to the USV. When I have a look to the driverlist then the effekta MKD1000 is not listed.In a window-System I can connect to the USV with the UPS management system from generex. Can you please help me to connect with NUT to the USV.

Hi, Any help on the following would be much appreciated I wish to capture the output (currently going to console) from an external executable. The executable is successfully run using system("program -switch ") and the output printed to the DOS console. How do I capture this output? I have tried redirecting the output to a text file, and then reading this in

I have the following problem. It is not of earthshaking importance, but still I have spent a considerable amount of time thinking about it. PROBLEM: Is there any way I can have a single textfile that contains both a) data b) programcode The program should act on the data, if the textfile is source()'ed into R. BOUNDARY CONDITION: I want the data written in the textfile in exactly

Hi, the following UPS isnt supported by the driver "usbhid-ups". Manufacturer: APC Model: Back-UPS 950 (https://www.apc.com/shop/de/de/products/APC-BACK-UPS-950VA-230V-AVR-Schuko- Sockets/P-BX950U-GR) Config: [USV] driver = usbhid-ups port = auto desc = "USV" . MODE=standalone Terminal: root at debian-jessie-final:~# sudo upsd -u root

Hey, I have the problem that my timer daemon doesn't start. I checked my configuration more than two times and I don't find the failure. Maybe someone can help me and tell me where the failure could be. --- syslog --- May 13 21:50:34 s-monitor1 upsmon[1674]: UPS usv3 at localhost on battery May 13 21:50:34 s-monitor1 upssched[855]: Executing command: ONBATT May 13 21:50:34 s-monitor1

Hello. I have an R program that calls gawk (GNU Awk 3.06 for Windows) from within pipe() to preprocess a large file before it is read into a data frame with read.table(). I've recently upgraded from Win98SE to WinXP, and have also upgraded from R1.5.0 to R1.6.1 over the past month or so. This program worked before the upgrade(s), but now fails. I observe the following sort of behavior with

Hi, I cant get it working. Here is my terminal output: root at debian-jessie-final:~# lsusb -d 051d:0002 Bus 001 Device 010: ID 051d:0002 American Power Conversion Uninterruptible Power Supply root at debian-jessie-final:~# ls -l /dev/bus/usb/001/010 crw-rw-r-- 1 root nut 189, 9 Mai 6 15:35 /dev/bus/usb/001/010 root at debian-jessie-final:~# sudo upsdrvctl start Network UPS Tools - UPS driver

On May 2, 2019, at 4:08 PM, Mathias Passow wrote: > > Hi, the following UPS isnt supported by the driver „usbhid-ups“. > > Manufacturer: APC > Model: Back-UPS 950 (https://www.apc.com/shop/de/de/products/APC-BACK-UPS-950VA-230V-AVR-Schuko-Sockets/P-BX950U-GR) > > Config: > [USV] > driver = usbhid-ups > port = auto > desc = "USV"

On Jan 22, 2015, at 9:53 AM, Sebastian Hosche <sebastian.hosche at web.de> wrote: > Hi Charles, > > Thanks so much for your quick and detailed reply! I've added my answers and details inline. Sorry this reply wasn't as quick. > On 22.1.2015 04:46, Charles Lepple wrote: >> On Jan 21, 2015, at 9:15 AM, Sebastian Hosche <sebastian.hosche at web.de> wrote:

Hi I got a problem with creating a textfile: how can I create a textfile, which has a headline like: #data1 1 2 3 4 5 6 7 8 the problem is, how to bind text and matrix, so that the "read.table"-function will ignore the text and read the numbers. Thank you for help Michael -- 2