Displaying 20 results from an estimated 4000 matches similar to: "Two UPS with same vendor ID"
2019 May 02
1
PowerShield Defender 1200VA
Hi,
Sometime ago I asked the question about getting nut to run on my iMac as
I was having trouble getting the USB driver to behave with OS X. The
same driver under LINUX is fine. It was suggested that the better option
might be to run nut on a Rasberry PI instead and monitor the nut daemon
from the iMac.
Well I have bought a Rasberry PI, I have other things planned for it. I
have installed nut
2010 Sep 16
1
Soyntec Sekury A600 VA
Hi all!
FYI, after some research in your list I think that blazer_usb is the
best driver for my Soyntec Sekury A600 UPS (which is not in the
hardware supported lists). I connected it with my system using USB
port (it also has serial RS-232) This is the report I have:
battery.voltage: 13.60
battery.voltage.nominal: 12.0
beeper.status: enabled
device.type: ups
driver.name: blazer_usb
2010 Aug 08
1
Driver does not detect megatec_usb UPS
Hello all:
I have a Yukai PowerMust 1000 USB and it used to work on another computer
using megatec_usb driver.
Now, I have it in a new computer, but the driver does not detect it.
It is there:
# lsusb|grep Cypress
Bus 006 Device 007: ID 0665:5161 Cypress Semiconductor USB to Serial
Permissions are OK:
# ls -l /dev/bus/usb/006/007
crw-rw-r-- 1 root nut 189, 646 ago 8 01:51
2011 Mar 08
1
PowerShield Centurion 2000
G'day,
New toy, came with bundled software which is non-free, so I'm looking at
whether NUT can be convinced to play with the toy. I've never used NUT
before.
OS name and version: Ubuntu 10.10
exact NUT version: 2.4.3-1ubuntu5
NUT installation method: Ubuntu package nut
exact device name and related information:
PowerShield Centurion 2000
2008 Mar 28
0
Belkin F6C1100-UNV not recognized by megatec_usb?
Hi everyone,
I have a belkin ups that was bought around 2 months ago. It seems like
the driver doesn't like the UPS, although on the website it's listed
as supported. This is on a gentoo system with nut 2.2.1 .
megatec_usb output:
---------SNIP----------
digamma nut # ./megatec_usb -a belkinm -DDDDDD
Network UPS Tools 2.2.1 - Megatec protocol driver 1.5.9 [megatec_usb]
Carlos Rodrigues
2007 Jan 03
2
Newpoint UPS
I just purchased a Newpoint 200894 UPS and I'm interested in getting it
going. It seems to use a USB to serial conversion that I'm not sure how
to get running.
Here's the lsusb -vvv
Bus 002 Device 005: ID 0665:5161
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
2009 Jun 18
0
Question about nut 2.4.1 and Ippon smart power pro 2000
Hi all!
I have a ups Ippon smart power pro 2000. And it connects to my FreeBSD
7.2 x86 server throught usb. I'm try to setup it in nut with
megatec_usb driver... But it is not recognizes ups.
I'm try set productid and vendorid in ups.conf, but this is not help.
Nut version 2.4.1 below i'm add output of lsusb, my ups.conf and /usr/local/libexec/nut/megatec_usb -a IPPON -DDD
2007 Aug 25
2
Belkin VA 550 USB Not Supported With nut 2.2.0
# /lib/nut/megatec_usb -a myups
Network UPS Tools 2.2.0- - Megatec protocol driver 1.5.4 [megatec_usb]
Carlos Rodrigues (c) 2003-2007
Serial-over-USB transport layer for Megatec protocol driver [megatec_usb]
No supported devices found. Please check your device availability with 'lsusb'
and make sure you have an up-to-date version of NUT. If this does not help,
try running the driver with
2010 Oct 25
1
ORVALDI 650/750/900SP.
hi,
i've bought a 750VA orvaldi ups http://en.orvaldi.com/index.php/en/product_catalog/product_view/11/162
which holds my hardware (wifi router, cable modem, quad-core with raid and lcd monitor) for ~15 minutes.
pretty nice result for a cheap (~57 euro) home ups.
in fact, the vendor software for linux is very old (e.g. requires ancient redhat with qt2),
requires db9 port while shipped
2012 May 28
1
FSP EP 850 doesn't work
Hi all,
I've bought UPS FSP EP 850 because I have similar UPS, FSP EP 1000. It
is working on my other server with with Fedora 14, kernel
2.6.35.14-106.fc14.x86_64 and installed nut-2.6.2-1. My new UPS is
detected by kernel (see below lsusb output) and is partially detected by
blazer_usb driver also. But it doesn't communicate with driver (see
below blazer_usb output). I run all
2008 Jan 07
1
INFOSEC 500 XP usb support
Hi everybody,
In a christmas sequel I've been offered one of the units mentioned above.
I've tried to connect it to my Fedora 8 workstation but rapidly
concluded it's not yet supported by NUT.
So far, I've decompiled the Java classes of the manufacturer's
application and noticed that it's most probably yet another kind of
serial protocol through the USB.
Since
2006 Jul 24
1
Fw: INFOSEC 500 XP en USB et drivers newhidups avec '-x generic'
Bonjour,
Je souheterais utilis? la version qui permet le '-x generic',mais je ne sais pas ou la recuperer car ca devrait solutionner mon probleme (cf mail ci-dessous)
DaneZ
_____
From: DaneZ [mailto:david.guillotte@danez.no-ip.org]
To: arnaud.quette@mgeups.com
Sent: Sat, 08 Jul 2006 23:24:06 +0200
Subject: Fw: INFOSEC 500 XP en USB
_____
Bonjour Arnaud,
Je me
2020 Mar 07
2
Power Shield Defender 1200 - The Story Continues
Hi,
Sometime ago [ June 2018 ] I posted a message about getting trying to
get NUT to work with a Power Shield Defender 1200VA UPS. This model
appears in the HCL at https://networkupstools.org/stable-hcl.html
That UPS reported the following when queried using 'lsusb' on an iMac
running macOS [ 10.15 ]
Bus 001 Device 008: ID 0665:5161 Cypress Semiconductor USB to Serial
Device Descriptor:
2011 Sep 28
0
[BUG] nut 2.4.3+: UPS EP-1K: Firmware fault: USB-Interface crashes with nut.org monitoring if driver polling time <15 sec
@fsp
Please forward to development, manufacturing and quality management department:
Model EP1000(PPF6000/100), 431107300095, 4711140480534, Art-Nr. 8296861, 70539, 14Z00000, 35-0200116-01G
@nut-users
http://www.networkupstools.org/ 2.4.3 debian stable, 2.6.2 upstream, linux 2.6.38-debian-bpo
# /usr/local/src/nut-2.6.2/drivers/blazer_usb -u root -DDDDD -a ups
Network UPS Tools - Megatec/Q1
2010 Apr 01
1
amacrox ap1000 problems
Ok guys I get this errors:
Network UPS Tools ? UPS driver controller 2.4.1
Network UPS Tools ? Generic HID driver 0.34 (2.4.1)
USB communication driver 0.31
No matching HID UPS found
my ups.conf is:
[ap1000]
driver = usbhid-ups
port = auto
I?ve also tried to set a specific usb port and change driver.
My ups is a AMACROX 1000
http://www.amacrox.com//english/01_product/02_01detail.aspx?pdid=46
2014 Aug 14
2
multiple identical UPS on same server
On 13/08/2014 16:27, Charles Lepple wrote:
>> The blew one had the serial number, so I'm left with two different UPSes
>> from the serial number point of view.
>> I wonder if an empty serial number is a valid serial number!
> I haven't tried it, but an empty string (that is, iSerial is not zero,
> but the string has length zero) should match the regex "".
2014 Feb 19
0
nut driver for SMS (brazil) UPS
Hi Charles,
I'll try the blazer_ser and the nutdrv_qx with version 2.7.1 later.
Below, the result of 'lsusb -vvv' requested:
Bus 004 Device 002: ID 04b4:5500 Cypress Semiconductor Corp. HID->COM RS232
Adapter
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.00
bDeviceClass 0 (Defined at Interface level)
2009 Mar 04
3
Nut with megatec_usb
Hi,
I'm new in the list and I'm having a little bit trouble to put the
megatec_usb to work.
I've been using NUT for a while with the apc and megatec driver (serial),
with no problem.
The server is a Ubuntu 8.04.2 with NUT version 2.2.1-2.1ubuntu7.2, the
default package version in this ubuntu release.
I've configured the ups.conf as follows:
[sms]
driver = megatec_usb
2009 Mar 04
3
Nut with megatec_usb
Hi,
I'm new in the list and I'm having a little bit trouble to put the
megatec_usb to work.
I've been using NUT for a while with the apc and megatec driver (serial),
with no problem.
The server is a Ubuntu 8.04.2 with NUT version 2.2.1-2.1ubuntu7.2, the
default package version in this ubuntu release.
I've configured the ups.conf as follows:
[sms]
driver = megatec_usb
2009 Jan 23
2
Problems with Unitek Alpha 1000 Ps
Hello to all list members,
I'm trying to make my UPS work with nut-2.2.2 (using Debian Testing, but
compiled from source code) for a week ago, with not success. It's a
Unitek Alpha 1000Ps, and I supossed it would work with megatec_usb
driver, as other Unitek models. It has an USB interface, and when I plug
it into my system I've got this message:
chopito:/home/jordi# dmesg | tail