similar to: port for powercom

Hi, I have a bunch of UPSs, most connected to pcs with Linux working 100% with NUT. The only one I have a problem with, is connected to Windows 7 64bit, and I used the straight MSI installed from the website named NUT-Installer-2.6.5-4.msi Took me a while to find a way to get it to work, but it is ugly for now. Just starting up the service results in a NUT not working at all, and I tracked it

Hello. I have problem with connecting to APC SC1000 using NUT port for windows 2.6.5-6. Last working version is NUT 2.6.1-1. With the same config files it works well. c:\NUT\bin>apcsmart.exe -a SC1000 Network UPS Tools - APC Smart protocol driver 3.1 (Windows-v2.6.5-5-7-g72f380c) APC command table version 3.1 w32_serial_open (COM3) setting initial state on COM3 0000007C = w32_serial_open

Hello, I am not able to get NUT working with a APC SC1500. The ups has only a serial port and came with a 940-0272a serial to usb cable. The cable has a fake Prolific chip in it, so only works by downgrading the driver to version 3.2. I tested a 940-0024C cable without success as well. The ups works with powerchute and apcupsd with the 940-0272a cable. Have not tested it with the other one. OS:

Dear Ladies and Gentlemen, I have several old, yet functioning APC Smart-UPS (Model 600LS, Part AP600I, Firmware 6JI, no EEPROM, from 1991). They are not supported by Powerchute any more. I run NUT 2.6.5-4 on Windows XP SP3. I use COM1 port with cable 940-0024C. The connection fails with APC Smart protocol driver 3.0 (2.6.3-3534:3540M), APC command table version 3.0 or higher - it works with APC

Hello all, been 5 years since I posted on this list, glad to be back :) I have a number of X-power Tigra 1kVA online UPS units. From some knowledgeable folks working for the local distributor, I learnt that from inside this looked like a Best 610 ups unit. Before, I had this UPS hooked via serial to my Windows 2003 server. For monitoring, some winpilot/upspilot software was also provided.

Hello all, long time away from this list, glad to be around again! I have this Powercom Vanguard VGN VGD-20K31. Some details of this model: * 3-phase input, single phase output * Model has 240V / 12V9AH x 20 x 2SET, plus another set of 20 batteries. All in all, 3 sets * Serial connection to Windows 2k3 server with UPSMon Now I was strongly considering replacing the bundled no-good upsmoon

I have only RS-232 on the box (meanwhile, it was manufactured on march of 2011) Here is my configs: nut.conf: * * MODE = netserver ups.conf: * * [KIN1500] driver = powercom port = notUsed desc = "Powercom KING PRO KIN-1500AP RM" upsd.conf: * * LISTEN 192.168.1.2 3493 upsd.users: * * [monuser] password = xxxxxxxx upsmon master

Dear Support, I'm newbie for this redhat 9 and samba 3.0, i having a problem on = paradox database with samba file server, can any support would like to = help. Your help is much appreciated. Will i have 30 PC running on WIn95 = & Win98 and application Corel Paradox 8. I already configure samba as = below, it having locking problems and slow. # Samba config file created using SWAT #

Operating system Windows 7 x64 NUT version 2.6.5 Windows port UPS Victron NetPro connected via serial port When I run driver when UPS cable is connected to computer's serial port it exits with following output victronups - -DDDD -a victron Network UPS Tools -GE/IMU/Victron UPS driver 0.20 (2.6.5.-3723:3731M) 0.000000 debug level is "4" 0.000000 w32_serial_open (COM1) 0.000000

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Is it possible to run wine with more than 4 serial ports? Looking through the source I seem to see a hard limit of MAX_PORTS=9, I would like something more on the order of 36 serial ports. I need to run multiple apps with a multi-port serial board, and I am hoping to do it though wine. When I try to set a com port of COM6 in my .wine/config file I get

I am also having Windows Issues, Refer back to the post I received from Charles Lepple. He gave me the details on how to resolve the missing USB driver issue - Although I would be very interested in what you find as I have not found time to revisit the issue yet.. ---------------------------------------------------------------------- > > Message: 1 > Date: Tue, 19 Jul 2016 17:28:51

Hi Mr newbie here. Using 32-bit Ubuntu 11.10 and Wine 1.3.28. I have installed a Creative PCI Modem and that works well as /dev/modem from things like putty. I've done the link ln -s /dev/modem ~/.wine/dosdevices/com6 so it's now my com6 within wine. However, using teraterm the response from the modem is bitty and slow and pretty useless. If I do something like AT\r the OK\r does come

I've tried multiple ways to get into terminal server via WINE, but have had no success. I've got Notes, Service Center, Internet Explorer... pretty much all running smoothly... but when I try to use Internet explorer to get into it, I get a box that is outlined where the desktop is supposed to be (on the IE screen, and an object load error in the IE Log)... I then tried to run mstsc.exe

Hello, I'm new to Wine and I tried to run Pepakura Designer with it. I'm using osx 10.5.8 and I've installed Wine through macports as advised in the download instructions. I downloaded Pepakura Designer 3.0.3a because it was the the most up to version with a decent rating, however I've run into the DIB Init Failed issue: Code: ine Pepakura\ Designer\ 3.exe

Hi, I am new to wine and the list. I am using Wine release 20010112 on a RH7.1 (used supplied RPM) to try and run a program to control a video switcher that doesn't have a linux ported program. The program starts OK but when it scans the com1 to diagnose the switcher, it reports a bad serial port or faulty connection. The utility has no problem under windows. I included a trace using

Hi, Since Sharps communication protocols are "top secret", I'm trying to port their sync software to linux. I'm new to wine, so this might be silly, but after hours of googling and searching for solutions I'm posting this. After installing DCOM98.exe, the Desktop software installed, and it runs. Only problem is it doesn't detect the device connected to the serial port

Dominique wrote: > > Never had that problem. Can it be a setting of the guest agent on the > guest? With me all the commands of the ga are enabled... > Where can i change the settings of the agent ? > You can check the commands by using this: > virsh qemu-agent-command $VM '{"execute": "guest-info"}' > > This way you can at least check that

So it seems that I have identified the source of all of my permissions issues, though I'm unclear as to exactly why these problems have occurred and would love an explanation if anyone can offer one. I was using mdadm to create a RAID 1 array, formatting it ext4 and storing all of the data that samba was serving on /dev/md0. The two drives that make up the array are hosted by an LSI MegaRaid

Im trying to run this program called Thinkboxx and wen it tryes to comunicate over the comm port it hangs. Here are som output to read. earlier on i get: Call kernel32.VirtualAlloc(43050000,00001000,00001000,00000004) ret=0058557c Ret kernel32.VirtualAlloc() retval=43050000 ret=0058557c thats from vhere the com port gets an virtual memory space, i think. and in the end i have: Call

We're trying to share a directory that's mounted via NFS from another server; when we connect to that share, smbd panics and tries to dump core. This is samba-3.0.30 on Alpha/Tru64-4.0G. The directory we're trying to use is exported from a Linux box called sesfs (Centos 4.4) and mounted on the Alpha server via NFS as /sesfs/scratch. I've appended below an edited summary from