similar to: NUT UPS in check_mk (OMD) monitoring - does a parser script already exist?

Hello, We have a small server room for our various Proxmox Host Servers, UTM system and managed switches. I've recently discovered NUT and would like to use it to monitor our UPS boxes using Raspberry Pi's. I have a few questions regarding the setup and I'm hoping this community can point me in the right direction. I'll be installing the latest version of NUT on each Raspberry

[please use reply-all to include the list. thanks!] On Oct 16, 2015, at 12:47 PM, Charles Mccrea <charlesmccrea at gmail.com> wrote: > > Hello, > > We have a small server room for our various Proxmox Host Servers, UTM system and managed switches. I've recently discovered NUT and would like to use it to monitor our UPS boxes using Raspberry Pi's. I have a few

I thought I'd chime in here a bit. I'm no RPi guru - but I've used them quite a lot for monitoring installs - stuff like Smokeping/Nagios/OMD/Cacti. They were cheap and seemed attractive low-power devices for client installs - back 5-6 years ago. I'm definitely using regular PC's now. Yes, the hardware is more expensive - but an Optiplex 7010 or the like off of ebay, with a

hi everyone, i''m trying to roll out an .exe file for the puppet package provider "windows". my manifest looks like this: $package_source = "http://puppet.local.domain/base_check_mk/windows/check-mk-agent-1.2.3i1.exe" $package_name = "Check_MK Agent 1.2.3i1" package { "$package_name": ensure => installed, provider =>

Hi, I posted over at R-help, and didn't get a response, but perhaps that was the wrong forum for this question. I'm having some confusion over the coordinate system after using pairs. I'm not interested in the content of the actual pairs plot, although the number of pairs seems to matter a bit. I'm purely interested in knowing where subsequent points will be plotted on the

On Oct 9, 2020, at 8:07 PM, Rusty Bower wrote: > > Hey all, > > I've read through as many relevant mailing list posts and public blog posts as I could, but I can't seem to find an answer to my issue. > > I currently have 2x Tripp Lite SMART1500LCDXLs, and I am attempting to monitor both of them with the same Raspberry Pi using NUT. The problem I have is there

I'm having some confusion over the coordinate system after using pairs. I'm not interested in the content of the actual pairs plot, although the number of pairs seems to matter a bit. I'm purely interested in knowing where my points will be plotted on the device. However, after using pairs, the par information (omd, fig, plt, and usr) don't reflect what points does. For example:

A few months ago, I built a samba 4 DC on a RPi 2B v1.1 with Louis' packages. It's just like a normal Intel cpu based installation with a couple of minor exceptions. I built mine on Raspbian Lite. You'll have to add an additional user and give it sudo privileges.The network setup was like the older Debian 9 by simply adjusting /etc/network/interfaces. To add Louis' repo

Hey all, I've read through as many relevant mailing list posts and public blog posts as I could, but I can't seem to find an answer to my issue. I currently have 2x Tripp Lite SMART1500LCDXLs, and I am attempting to monitor both of them with the same Raspberry Pi using NUT. The problem I have is there doesn't seem to be any way in the nut.conf to differentiate between the two UPS via

Dear all, I have a question about "par" options. When I choose par(pty="s",mfrow=c(2,2)), how can I change the horizontal distance between the plots???? I have tried to use some options, like "mai", "mar", "oma", "omd", so on but I didn''t get the expected result. Some suggest will be appreciated. JM.

Hello, I would like to monitor my UPS Legrand Niky S from a Raspberry Pi3 but I have not found it in the compatibility list. Has anyone been able to monitor an UPS Legrand using NUT? Your help would be greatly appreciated. Thanks, Daniele

Hi, Reference: > From: "Julian H. Stacey" <jhs at berklix.com> > Date: Sun, 11 Oct 2020 01:57:16 +0200 "Julian H. Stacey" wrote: > > > I've read through as many relevant mailing list posts and public blog = > > posts as I could, but I can't seem to find an answer to my issue. > > >=20 > > > I currently have 2x Tripp Lite

Hi there, we are using Version 4.1.3-SerNet-Debian-7.wheezy deployed as AD with internal DNS. Perodically we found this message in samba.log (with debug dns:7): [2014/01/15 12:01:46.818770, 5] ../source4/dns_server/dns_utils.c:63(werr_to_dns_err) No mapping exists for WERR_TIMEOUT In the same time no local DNS entries are not resolvable: Host: ZAHNADMIN Alias: ZAHNADMIN Address:

Hi, I tried this puppet shell command and I''m getting a warning: oracle@z3:/pt/b/puppet$ puppet describe -s user racc/parser.rb:27: warning: already initialized constant Racc_Runtime_Version Here is some info about my setup: oracle@z3:/pt/b/puppet$ oracle@z3:/pt/b/puppet$ ruby -v ruby 1.9.2p318 (2012-02-14 revision 34678) [x86_64-linux] oracle@z3:/pt/b/puppet$ oracle@z3:/pt/b/puppet$

Hello, With my configuration Dovecot creates multiple duplicates (sometimes 2, sometimes 3, sometimes a plenty) of mailfiles when moving them into the Sent or the Trash folders. This does not affect the Inbox folder. I observed this while using Thunderbird on Ubuntu as a client as well as K9-Mail on Android, therefore I expect this comes from the Dovecot server and not from the client

I've not been able to connect to my ups using NUT 2.7.4 or NUT 2.8.0. 2.7.4 was installed as a package, 2.8.O was compiled from source. I've messed with permissons, everything is root:root and has the approprate read/execute permissons. I've tried two differnt UPS(es) APC & CyperPower. I'm running PI OS (Raspbian) on a Raspberry Pi3 model B. The port 3493 is open (UFW). I can

Hi all, I'll try either, as my last tries (1 year ago) to make an RPI4 a Samba AD-DC have all failed because of missing dependencies. Thanks Electronico NEW-CALEDONIA (South Pacific) Le 09/08/2023 ? 15:54, Dirk Laurenz via samba a ?crit?: > Hi, > > that sounds nice.... i will try this... > > -----Urspr?ngliche Nachricht----- > Von: samba <samba-bounces at

Hello, I've been having trouble with configuring NUT in my home system. First, I have NUT server installed in one raspberry with one UPS connected by USB to it, I followed Techno Tim's tutorial on the matter and it worked perfectly with the web GUI. Then, I have another raspberry pi with two UPS connected by USB that I want to connect to the first so I use just one GUI, but I

Hello, I'm using R to do survey analysis and plotting. I've gotten good help on this list to sort out specific plotting issues, but I think I could do a lot more on my own if I could find a good reference that explained some of the graphics terms and concepts used by R. I haven't found a general discussion of the graphics environment, with illustrations. Part of my problem is that the

Now that upsstats.cgi works, I've noticed that dummy-ups changes state every 5 minutes between OL and OB (probably when the 300 second timer expires). The UPS state stays online. Also "online" and "onbatt" are broadcast to the console probably via WALL. (The state changes don't seem to be form the ups as upsshed-cmd doesn't run). Upssched-cmd does run when the UPS