similar to: UPS

It looks like the CyberPower Cyber Power Systems CP685AVR supported by usbhid-ups has a favorable device dump linked to the Devices Dumps Library page here: http://networkupstools.org/ddl/Cyber_Power_Systems/CP685AVR.html However, it is not listed anywhere on the Hardware Compatibility List (HCL) page here: http://networkupstools.org/stable-hcl.html This appears to be an omission on the HCL

On Tuesday 21 January 2020 19:52:01 Charles Lepple wrote: > sudo lsusb -v -d 0764:0501 copious output, containing this: idVendor 0x0764 Cyber Power System, Inc. idProduct 0x0501 CP1500 AVR UPS bcdDevice 0.01 iManufacturer 3 CPS iProduct 1 CP625HGa I take it that this is evidence they don't follow the spec to the letter.

Hi I have just purchased a Cyberpower CP1300EPFCLCD UPS. It is not listed in your Compatibility List http://networkupstools.org/stable-hcl.html I am very new to all this but do have a background in IT. I have been retired for 18 years so am a bit out of touch so please excuse if I am a bit fuzzy. I will try my best to explain my issue below. When I plug my UPS into my Synology NAS

I need some help here with getting this thing running. Every time I enable NUT on the server, I get a "on battery" status when I know that it is running on house power. This only occurs when I am monitoring it with FreeBSD(NAS4Free) When i plug the same UPS into CentOS 6.7, It works as expected. I am not sure what the difference between the NUT versions other than the base OS would be.

I'm playing with a new CentOS 8 with a cyperpower OR500 (a smaller sibling to the OR700) plugged in via USB. GNOME sees the UPS... but NUT does not (even if I shut down gnome). > [root at delp ups]# upsdrvctl start > Network UPS Tools - UPS driver controller 2.7.4 > Network UPS Tools - Generic HID driver 0.41 (2.7.4) > USB communication driver 0.33 > No matching HID UPS found

Hey guys, :) recently, I installed Cyberpower PR2200ELCDRT2U, however, I have not managed to get this UPS working with FreeNAS 11, yet. According to compatibility list, PR2200 should work fine, when using powerpanel driver: http://networkupstools.org/ddl/Cyber_Power_Systems/ http://networkupstools.org/ddl/Cyber_Power_Systems/PR2200.html However, when trying to establish a connection between

On Tuesday 14 January 2020 00:03:09 Gene Heskett wrote: > On Monday 13 January 2020 22:42:46 Charles Lepple wrote: > > On Jan 13, 2020, at 10:17 PM, Gene Heskett wrote: > > >>> (I was looking at the hid-subdrivers.txt file in the latest NUT > > >>> tree, which has the command line amended to not generate that > > >>> "too many non-option

The Hardware Compatibility List page on our website said to report any omissions in the list to this address. I bought a CyberPower UPS Model *LX1500GU*. It looks similar to the *CP1500AVRLCD*. My intention is to configure it in FreeNAS (FreeBSD). The FreeNAS user guide says it uses NUT to provide UPS support an contains a link to your website for a list of drivers of supported UPS devices. I

I'm trying to get a CyberPower PP1100 working with NUT on a Fedora 16 system and not having much luck. Kernel: 3.4.4-4.fc16.x86_64 #1 SMP Thu Jul 5 20:01:38 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux NUT (installed from Fedora RPM): nut-client-2.6.4-1.fc16.x86_64 nut-2.6.4-1.fc16.x86_64 libusb: libusb-devel-0.1.3-9.fc16.x86_64 libusb1-1.0.9-0.6.rc1.fc16.x86_64

On Aug 8, 2014, at 9:15 AM, Charles Lepple <clepple at gmail.com> wrote: > On Aug 7, 2014, at 10:52 PM, Charles Lepple <clepple at gmail.com> wrote: > >> On Aug 7, 2014, at 10:18 PM, Matthew Stapleton <matthew4196 at gmail.com> wrote: >> >>> I just got a Cyberpower SOHO Value 1200 ELCD UPS and even with nut 2.7.2, it appears to report battery voltage

I was getting: "Can't claim USB device [0764:0501]: could not detach kernel driver from interface 0: Operation not permitted" so I manually installed the udev rules the source (I installed the Gentoo ebuild). I am now getting: # upsdrvctl start Network UPS Tools - UPS driver controller 2.4.3 Network UPS Tools - Generic HID driver 0.34 (2.4.3) USB communication driver 0.31 Using

I bought a new CyberPower CP850AVRLCD ups, connected it to a usb port and I'm trying to use it with hal. I installed [root at phoenix ~]# rpm -q nut nut-client nut-2.2.0-6.1.fc8 nut-client-2.2.0-6.1.fc8 lsusb sees it: [root at phoenix docs]# lsusb Bus 001 Device 001: ID 0000:0000 Bus 005 Device 002: ID 0c45:1050 Microdia Bus 005 Device 001: ID 0000:0000 Bus 004 Device 001: ID 0000:0000

On Aug 7, 2014, at 10:52 PM, Charles Lepple <clepple at gmail.com> wrote: > On Aug 7, 2014, at 10:18 PM, Matthew Stapleton <matthew4196 at gmail.com> wrote: > >> I just got a Cyberpower SOHO Value 1200 ELCD UPS and even with nut 2.7.2, it appears to report battery voltage too low due to the battery scaling function (In drivers/cps-hid.c). Even though the ups has usb id:

I have a Cyber Power LE1000DG UPS I got from Best Buy this weekend. I plan to use it with a TrueNAS scale system, and it is connected via USB. Vendor link: https://www.cyberpowersystems.com/product/ups/battery-backup/le1000dg/. TrueNAS has you pick a UPS driver. I could not find any "LE" related models on https://networkupstools.org/stable-hcl.html (which is the list TrueNAS uses). Per

Hi Recently i bought a MicroDoWell BP50, and with it followed a USB 2 serial converter. When i plug it into my 2.6.19 kernel, dmesg shows hiddev96: USB HID v1.10 Device [Cyber Power System CPS RS232 USB BRIDGE for UPS] on usb-0000:00:04.2-2 usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver So, i figured i should use usbhid-ups,

Hello, I am having a heck of a time with false low battery alarms right now.  It has been going on for the last couple of months.  I originally started getting them with a UPS that was 1-2 years old so I thought it was time to change it out and buy a new one.  I'm still getting the false alarms with the brand new one.  The status is "OL LB" which is strange to me. I have a

> When a UPS unit performs a delayed power off (NUT sets the delay to 20 seconds > by default) it deconnects its power outlets which in some UPS units produces an > audible "clunk". The display of lights on the front panel changes, and the > beeping stops. The delayed power off can be demonstrated with a light bulb or a > mains circuit tester connected to one of the

I just got a Cyberpower SOHO Value 1200 ELCD UPS and even with nut 2.7.2, it appears to report battery voltage too low due to the battery scaling function (In drivers/cps-hid.c). Even though the ups has usb id: 0764:0501, UPS.PowerSummary.Voltage reports 26.6 for the 24V batteries so when the 0.667 battery scale is applied that goes down to 17.7V. upsc output: battery.charge: 100

[shutdown sequence] I have tested and verified the shutdown sequence works. [manufacturor] https://www.cyberpowersystems.com/product/ups/ec350g/ mbeisser at nas:~$ upsc ups Init SSL without certificate database battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 20 battery.mfr.date: CPS battery.runtime: 1575 battery.runtime.low: 300 battery.type: PbAcid battery.voltage: 9.3

So I just bought one of these fabulous CyberPower UPS devices from BestBuy hoping I could control it with my machine. Luckily, I found NUT! I've got the SVN sources and compiled and installed them but I haven't been able to get it to recognize the usb AE550. When I plug the usb cable in I see this in syslog: Feb 6 22:36:56 mythbox kernel: usb 1-1: new low speed USB device using