similar to: request of information

Digitus DN-170014 root at home:/home/scripts# upsc ups device.mfr: Richcomm dry-contact to USB solution device.model: UPS USB MON V1.4 device.serial: unknown device.type: ups driver.name: richcomm_usb driver.parameter.pollinterval: 2 driver.parameter.port: auto driver.version: 2.6.4 driver.version.internal: 0.04 ups.mfr: Richcomm dry-contact to USB solution ups.model: UPS USB MON V1.4

> Am 16.03.2018 um 14:21 schrieb isdtor <isdtor at gmail.com>: > > Nicolas Kovacs writes: >> Hi, >> >> I have to install CentOS 7 for a client, to act as cache & filtering >> proxy using Squid. >> >> I'd like to use this piece of specialized hardware : >> >>

Hello, just want to report a successful installation of the Digitus DN-170020 UPS. Works mostly without problems with the megatec driver and the included cable, a few issues arose: - the toggle beeper command seems not to work for this UPS. - to shutdown and cut the power line, a delay has to be inserted for the driver; without the UPS just beeps but does not switch off. - the test commands do

Hello, i`m looking for a nut-compatible low-power UPS (need to hook a home-server+dsl equipment with a load of ~50W to that) which should be as energy efficient as possible and be also affordable. i currently have an older powerwalker which constantly burns ~15W for nothing. The transformer inside getting that hot that you don`t like to touch it and i think 15W out of 50 is a little bit high

Thanks for reply. when i try richcomm_usb or blazer_usb or other usb i get the output of : sudo /lib/nut/usbhid-ups -a trust -DD this is the output: Network UPS Tools - Generic HID driver 0.37 (2.6.4) USB communication driver 0.32 Error: UPS [trust] is for driver richcomm_usb, but I'm usbhid-ups! i tried to set the ups.conf to: [trust] driver = usbhid-ups port = auto vendorid = 0925

On Thu, Dec 4, 2008 at 4:51 PM, Arjen de Korte <adkorte-guest at alioth.debian.org> wrote: > Author: adkorte-guest > Date: Thu Dec 4 21:51:28 2008 > New Revision: 1596 > > Log: > Added new richcomm_usb driver based on the lakeview_usb driver (using libusb). Sorry if I wasn't clear - I was advocating *renaming* the lakeview_usb driver to richcomm_usb. Is there another

Hallo all. I tried to configure the UPS Trust OXXTRON 1300VA but i didn't succeed. i tried the blazer_usb <http://www.networkupstools.org/docs/man/blazer_usb.html> driver and others but i didn't succeed. My lsusb says Bus 002 Device 005: ID 0925:1234 Lakeview Research Bus 004 Device 002: ID 0781:5567 SanDisk Corp. Cruzer Blade Bus 004 Device 004: ID 0424:2228 Standard

Hi, I'm trying to configure my ups with nut which is a locally made one. It uses a rs232 port to talk to the computer and comes with a software called "Powermanager Lite" which is provided by Richcomm and supports Windows, Linux and UNIX. According to the manual it uses the Richcomm circuitry to talk to the computer and uses a drycontact protocol. Unfortunately I couldn't

Le 16/03/2018 ? 14:29, Leon Fauster a ?crit?: > We use a DIGITUS USB2Serial Converter (Prolific based USBID: VID:067B PID:2303) and then > > screen /dev/DEVICE 115200 Thanks everybody for your numerous suggestions. As soon as I have the hardware, I'll fiddle with it and then report back my findings. Cheers, Niki -- Microlinux - Solutions informatiques durables 7, place de

On 03/16/2018 10:09 AM, Nicolas Kovacs wrote: > Le 16/03/2018 ? 14:29, Leon Fauster a ?crit?: >> We use a DIGITUS USB2Serial Converter (Prolific based USBID: VID:067B PID:2303) and then >> >> screen /dev/DEVICE 115200 > > Thanks everybody for your numerous suggestions. As soon as I have the > hardware, I'll fiddle with it and then report back my findings. >

Hi all, Have been using Nut on Linux for over ten years now and find it brilliant. Thanks. Just upgraded to 2.4.2 and have the 5 or 6 models of UPS's that we use (apcsmart, megatec, mge-shut, surgemax, digitus) all working including the MGE Pulsar Evolution 1100 on a USB connection using the usbhid-ups driver. Running on SLES9. Old but we still have a few servers out there running

Hi, are this UPS supported by any other driver than "richcomm_usb". The device works with richcomm_usb, but only signals online, offline etc. Not voltage, batterylevels etc. Bus 006 Device 009: ID 0925:1234 Lakeview Research Bus 006 Device 009: ID 0925:1234 Lakeview Research Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10

Hello all, when I do a signature request to puppetmaster, if no domainname is configured then puppet gets it from /etc/resolv.conf. Even if the "search" line is commented. I had to delete the search line in resolv.conf to obtain a signature request with hostname only, and then it appears with a final dot (hostname.). Is it that puppet does not like being domainless ? Many of my

I am a complete novice in this area so please bear with me. I have installed nut version 2.6.2-1 for my debian 64bit system. I am trying to implement 'nut' for a new VIX2120 home UPS and have determined that I need the richcomm_usb driver [usb 0925:1234]. But it is not in /lib/nut although referenced in the documentation (driver.list) How do get hold of a copy? Due to ignorance I am not

Hi, I have to install CentOS 7 for a client, to act as cache & filtering proxy using Squid. I'd like to use this piece of specialized hardware : http://store.calexium.com/fr/systeme-pre-assemble/869-systeme-pre-assemble-rackmatrix-apu-amd-gx-412tc-quatre-coeurs-1-ghz.html There is no VGA or HDMI video output, just a serial port to connect to, and then three NICs and two USB ports.

guys, A bit off topic here, but since this issue already has a history here: serial connection to the SCD, the never ending story ... - the intel D945GSEJT mainboard (ICH7) has two serial ports with onboard connectors which require a ribon cable to the external DB9 connectors in the case. I tested 5 cables, but none works. whereas I'm not sure if it is a cable problem. this is what dmesg

Heya, first time posting to a mailing list so please excuse me if I do something wrong :) I'm new to NUT and trying to get things working on my TrueNAS, I have a "Vultech 1500VA" UPS which comes with the software "PowerManager II" and it seems to be using the "richcomm_usb" driver. There are 5 devices in the compatibility list and I tried all of them, sadly to

I have a Gentoo linux (OpenRC) desktop connected to a UPS, the brand is Vultech, but lsusb gives me this: Bus 003 Device 006: ID 0925:1234 Lakeview Research and I found an article about this hardware here, someone had it working with the richcomm_usb driver: http://verahill.blogspot.it/2012/12/kstar-australia-1500-va-ups-on-debian.html So, I installed nut and configured my UPS to work with the

----- Forwarded Message ---- From: Terry Powling <terrypowling at yahoo.co.uk> To: nut-upsuser at lists.alioth.debian.org Sent: Sat, 27 February, 2010 22:30:05 Subject: trouble setting up kebo-1000d ups (usb) Trying to setup Kebo ups-1000D with usb port. lsusb Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 0925:1234 Lakeview Research Bus 002 Device

On 27/12/13 00:06, Charles Lepple wrote: > Could you please send the debug output? (if it is more than ~ 30KB > gzipped, just send it directly to me.) I was going to use the debug > output from the earlier thread to generate those C files, but yeah, > there are some additional bits needed. If nothing else, it would be > good to improve the diagnostics for that script. Here's