similar to: USV effekta MKD1000

Hello everybody, this is my first post to this list - normally I take some time to read some messages first to get an impression of the List, but I have a pressing question to ask, so please forgive me if I miss the right tone... I just installed NUT 2.0.2 and try to get it working with our Effekta MT 1500. In the Drievers List I found this entry: "Effekta" "MI/MT/MH"

Hi ups-devel, As I looked throw www.networkupstools.org site, haven't found any pointers where to send patches, so I hope this is the right place. (Please let me know weather this is the right place.) The patch contains a minor change in the logic of the driver, our Effekta MHD 3000 UPS continuously writes status data to the serial port, so one has to send a CR character and empty the

Dear Nut-Devs, I have general question to the contribution and the handling of new code in the NUT-Project. We would like to implement our USV-Solution as a driver to NUT, but we are having the problem, that we need a powerful “C”-based gpio library for it. We discussed this topic internally, and we are having the opinion, that it does make sense, to write this library separate from a

Hello List, i have a "PowerWalker VI 400, VI 600, VI 800" ups, which i bought on ebay since it said it supports Linux. Well, it came with a closed source binary written in Java. :( Has anyone a config file which will fit to my PowerWalker ups/usv? The genericups driver doesnt seem to work. Thanks, Mario -- GMX DSL = Maximale Leistung zum minimalen Preis! 2000 MB nur 2,99, Flatrate

Hi Arnaud, Hi Scott, Hi list, Here is a patch to support the Zinto D from ONLINE USV-Systeme AG. I already sent a version to Russell Kroll (2006-04-09), without no response and I cannot find support for Zinto in svn until now. I found a discussion on this list about the Xanto from ONLINE, but the Zinto seems to use different commands. The commands are quite similar to those for Opti-UPS, so I

Hi, I'm trying to get an Effekta UPS (works directly with blazer_ser) working behind a seriell to ethernet converter (Brainboxes ES-246). I've set the converter to 2400 baud, 8N1, no flow control. On the linux side I started socat and blazer_ser. All I got are timeouts after 12 seconds. I can see network traffic with tcpdump but I've no idea what to do to get this working. Does

Hi Henning, you should get in touch with Carlos, who his developing a generic megatec driver (available from svn: http://eu1.networkupstools.org/source.html) Arnaud -- Linux / Unix Expert - MGE UPS SYSTEMS - R&D Dpt Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/ Debian Developer - http://people.debian.org/~aquette/ OpenSource Developer -

Hi, today I have tested the Zinto 800 with blazer_ser and blazer_usb on Citrix Server 7.0. Both works fine. upsc-Output (blazer_ser): battery.charge: 94 battery.voltage: 25.70 battery.voltage.high: 26.00 battery.voltage.low: 20.80 battery.voltage.nominal: 24.0 device.mfr: device.model: ZINTO 800 device.type: ups driver.name: blazer_ser driver.parameter.pollinterval: 2 driver.parameter.port:

Hello, today I'm fighting with a Online Zinto 1000 (lsusb.txt) produced by Phoenixtec/Eaton ;-) http://www.eaton.com/EatonCom/OurCompany/NewsandEvents/NewsList/CT_141334 I have tested different drivers without success (please see attachments usbhid-ups.txt, bcmxcp_usb.txt, blazer_usb.txt) The help got unfortunately time outs (explore.txt)

Hi, I am using the NUT Software 2.7.4 (Ubuntu Repository) on Ubuntu 18.04. Configuring a UPS with the snmp-ups driver and overriding the battery.runtime.low variable leads to following warnung/error: Sep 23 11:10:08 hostname snmp-ups[27115]: dstate_setflags: base variable (battery.runtime.low) is immutable Default for battery.runtime.low is 180 seconds. My idea is to increase the value to

Hi, the following UPS isnt supported by the driver "usbhid-ups". Manufacturer: APC Model: Back-UPS 950 (https://www.apc.com/shop/de/de/products/APC-BACK-UPS-950VA-230V-AVR-Schuko- Sockets/P-BX950U-GR) Config: [USV] driver = usbhid-ups port = auto desc = "USV" . MODE=standalone Terminal: root at debian-jessie-final:~# sudo upsd -u root

Hey, I have the problem that my timer daemon doesn't start. I checked my configuration more than two times and I don't find the failure. Maybe someone can help me and tell me where the failure could be. --- syslog --- May 13 21:50:34 s-monitor1 upsmon[1674]: UPS usv3 at localhost on battery May 13 21:50:34 s-monitor1 upssched[855]: Executing command: ONBATT May 13 21:50:34 s-monitor1

Hi, I own a Yunto-Q 700 (made 2000 by online usv systems) and a Yunto-Q 1200 (made 2010). They both work with blazer_ser, but didn't shutdown. I straced the proprietary driver and found the ups expected the return time given with _5_ digits instead of 4, else the command was ignored by the ups. And the Yunto don't send rating/manufacturer informations. I don't want to commit this to

Hi, I cant get it working. Here is my terminal output: root at debian-jessie-final:~# lsusb -d 051d:0002 Bus 001 Device 010: ID 051d:0002 American Power Conversion Uninterruptible Power Supply root at debian-jessie-final:~# ls -l /dev/bus/usb/001/010 crw-rw-r-- 1 root nut 189, 9 Mai 6 15:35 /dev/bus/usb/001/010 root at debian-jessie-final:~# sudo upsdrvctl start Network UPS Tools - UPS driver

On May 2, 2019, at 4:08 PM, Mathias Passow wrote: > > Hi, the following UPS isnt supported by the driver „usbhid-ups“. > > Manufacturer: APC > Model: Back-UPS 950 (https://www.apc.com/shop/de/de/products/APC-BACK-UPS-950VA-230V-AVR-Schuko-Sockets/P-BX950U-GR) > > Config: > [USV] > driver = usbhid-ups > port = auto > desc = "USV"

Hi there, i have a problem with the NOTIFYCMD in the upsmon.conf file. My line in the config looks like this: NOTIFYCMD "/etc/nut/upsnotify.sh" Now this ist my "/etc/nut/upsnotify.sh": #!/bin/bash EMAIL='mail at domain.de' SMS1='+49123456789' SMS2='+491987654231' #eMail versenden echo -e "Die USV mit dem Namen '$UPSNAME' hat seinen

Good morning, i have an Xanto S1000 USV the Manufactor is ONLINE USV-Systeme AG. I tried all the buildin drivers, also the driver for the driver for the Generic UPS, nothing worked for this UPS so now my question has anyone else this UPS and functional driver? Thanks and Greets Dennis

Hello, I'm cc'ing R-Help. Sorry but your question was asked 3.5 years ago, I really don't remember it. Can you please post a question to R-Help, with a reproducible example that describes your problem? Rui Barradas ? Citando catalin roibu <catalinroibu at gmail.com>: > Dear Rui, > ? > I helped me some time ago with a code..... regarding aggregated data >

Hello, I'm working on getting nut using a Powermust Office 650 USB USV. Using today's trunk megatec_usb detects its vendorid 0665 productid 5161 but uses the agiler driver for it which apparently does not work (timeout...). I think this device is using that USB-to-serial chip but a different protocol behind. I got the phoenix subdriver working with the device but I had to extend

On Jan 21, 2015, at 9:15 AM, Sebastian Hosche <sebastian.hosche at web.de> wrote: > Hi there, > > I just purchased a CyberPower BR850ELCD and while setting NUT up with the install instructions from the homepage was pretty straightforward, and the UPS was detected by the usbhid-ups driver, I'm having problems getting the UPS to work properly. > > First issue: whatever I