similar to: SEcontext setting failure on an external harddisk

On Oct 8, 2020, at 15:22, H <agents at meddatainc.com> wrote: > > ?I tried moving a PosgreSQL database to an external harddisk due to lack of space on the main harddisks. Not the ideal solution of course but it should work. However, on CentOS 7 the external harddisk is mounted under /run/media and the user. I copied the postgresql database directory and made sure it is owned

On 09/30/2020 05:40 AM, John Pierce wrote: > On Tue, Sep 29, 2020, 8:33 AM H <agents at meddatainc.com> wrote: > >> I have an old external harddisk, Toshiba 320 Gb, with a USB connector that >> I wanted to check for contents. It did not start up when connected and I >> could not hear the motor spinning. After leaving it in the freezer >> overnight the motor

I have an old external harddisk, Toshiba 320 Gb, with a USB connector that I wanted to check for contents. It did not start up when connected and I could not hear the motor spinning. After leaving it in the freezer overnight the motor spins but it is not recognized by my computer. I disassembled it and could see that the head assembly rests outside the disk but when it is powered on, the head

> Since you have taken the disk apart it will now be useless as within the > enclosure there could have been a vacuum or an inert gas. >From what I know gas filled disks didn't exist in the times when 3X0GB was on a 2" drive. > > You will never be able to recover any data on the disk unless you go and > pay > for a professional data recovery organisation to read the

On October 1, 2020 12:03:34 PM EDT, Bruce Ferrell <bferrell at baywinds.org> wrote: >On 9/30/20 9:11 AM, H wrote: >> On 09/30/2020 12:03 PM, Simon Matter wrote: >>>> Since you have taken the disk apart it will now be useless as >within the >>>> enclosure there could have been a vacuum or an inert gas. >>> From what I know gas filled disks

I don't know whether testdisk would be helpful in this case or not but your options are limited, might give it a try. ________________________________ From: CentOS <centos-bounces at centos.org> on behalf of H <agents at meddatainc.com> Sent: Friday, October 2, 2020 6:40 AM To: CentOS mailing list <centos at centos.org> Subject: [EXTERNAL] Re: [CentOS] External harddisk

On 09/30/2020 12:03 PM, Simon Matter wrote: >> Since you have taken the disk apart it will now be useless as within the >> enclosure there could have been a vacuum or an inert gas. > From what I know gas filled disks didn't exist in the times when 3X0GB was > on a 2" drive. > >> You will never be able to recover any data on the disk unless you go and >>

On 9/30/20 9:11 AM, H wrote: > On 09/30/2020 12:03 PM, Simon Matter wrote: >>> Since you have taken the disk apart it will now be useless as within the >>> enclosure there could have been a vacuum or an inert gas. >> From what I know gas filled disks didn't exist in the times when 3X0GB was >> on a 2" drive. >> >>> You will never be able to

Hi there, I''ve been trying for a few hours now to get RoR and postgresql talking - but I''m very confused about what''s going on (I''m running windows btw). I haven''t created a database in postgresql (I''m assuming that RoR will do that?) my database.yml looks like this: production: adapter: ruby-postgres database: rails_production

I am considering buying a small, and therefore easily portable, computer as an alternative to the laptop I already have. Obviously it would not have battery, a screen, nor a keyboard etc. but more or less be an easily portable computing unit to move between offices where a keyboard and monitor(s) could then be connected. I want to run CentOS 7, later CentOS 8. The smaller, the better, however,

I am trying using a kickstart file to install CentOS 6.2 into a new virtual machine (the MBR sector of the harddisk is all zero), however I found that the installer cannot go through the harddisk partition. It failed after I chose "Use All Space" at harddisk partition option. The error message is: http://anony.ws/i/bMcTJ.png "You have not defined a root partition (/), which is

My computer running CentOS 7 is configured to use BIOS RAID0 and has two identical SSDs which are also encrypted. I had a crash the other day and due to a bug in the operating system update, I am unable to boot the system in RAID mode since dracut does not recognize the disks in grub. After modifying the grub command line I am able to boot the system from one of the harddisks after entering the

Since you have taken the disk apart it will now be useless as within the enclosure there could have been a vacuum or an inert gas. You will never be able to recover any data on the disk unless you go and pay for a professional data recovery organisation to read the platters. The price for a replacement 340GByte USB disk is about $25 which would give you a better product than your old disk.

> On Nov 4, 2020, at 9:21 PM, John Pierce <jhn.pierce at gmail.com> wrote: > > is it RAID 0 (striped) or raid1 (mirrored) ?? > > if you wrote on half of a raid0 stripe set, you basically trashed it. > blocks are striped across both drives, so like 16k on the first disk, then > 16k on the 2nd then 16k back on the first, repeat (replace 16k with > whatever your raid

On Tue, Sep 29, 2020, 8:33 AM H <agents at meddatainc.com> wrote: > I have an old external harddisk, Toshiba 320 Gb, with a USB connector that > I wanted to check for contents. It did not start up when connected and I > could not hear the motor spinning. After leaving it in the freezer > overnight the motor spins but it is not recognized by my computer. I > disassembled it

Hi, I have a mailgw running Centos where trendmicro(IMSS) is installed. it works perfectly. Now, the problem is it is running out of Harddisk. pls see below and pay attention to / file system (/dev/sda6), where only 1.3 gb is available. these are not Logical volums (LVM) [root at gateway 17141]# df -h Filesystem Size Used Avail Use% Mounted on /dev/sda6 9.7G 7.9G 1.3G

I have the 5.x Centos DVD and loaded it. Please be gentle with me, as I'm nominally a FreeBSD kind of guy... :) Anyway, I'm trying to install Postgres and the three libraries in the subject line are missing off the base installation. I figured out how to load gcc using yum, but those libraries aren't there, and I need the former in particular in order to enable SSL for Postgres

HI Can I install Centos on Segate ST3160812AS ( SATA II ) Harddisk? Asky

Hi All, I set up posgresql on RedHat El4. Below are rpms I installed. [root at LinuxBox etc]# rpm -qa |grep postgres postgresql-libs-7.4.16-1.RHEL4.1 postgresql-devel-7.4.16-1.RHEL4.1 postgresql-7.4.16-1.RHEL4.1 postgresql-python-7.4.16-1.RHEL4.1 postgresql-server-7.4.16-1.RHEL4.1 Then, I did below commands to create a user and a database. [root at box root]# su postgres bash-3.1$ createuser

I got the have install a SATA HardDisk on the machine recently. But somethings the Disk cannot be accessed. And mesg tells that it is IO error. Is it a hardware problem or system setting problem. Here is the message from dmesg. sd 0:0:0:0: SCSI error: return code = 0x00040000 > end_request: I/O error, dev sda, sector 27099199 > EXT3-fs error (device sda1): ext3_readdir: directory #1687553