similar to: ptime

The PJSIP endpoint is configured for ulaw only. Not sure how or why we are seeing the g729 on calls for this endpoint. Would this be a case that asterisk detects the rtp stream is g729 even though it's negotiated as ulaw? Why would asterisk change the format to g729 when disallow = all and allow = ulaw are the endpoint settings? [121] type = endpoint context = IS transport = transport1 aors

Dear list, I am currently trying to send faxes via T.38 using PJSIP (newest version 2.3) with Asterisk 13.0.2. After having configured PJSIP, I have seen several things the cause of which I would like to know. 1) Ports and IP addresses which PJSIP bind to I have configured one transport like that: [tr_wZCMk5MvC2ATNzAr] type = transport protocol = udp bind = 192.168.20.48 Nevertheless, PJSIP

I am trying to set add a SIP Header to a call before adding it to the Queue. The dial plan sends the call to my macro to perform the work. When I use chan_sip, everything works as expected. When I use PSJIP support, it's not adding the SIP header. Looking at the output, I see the macro is called in both cases. In the PJSIP case, the added sip header never is showing up in the asterisk logs

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi list, 2 weks ago I asked questions about PJSIP and T.38 but got no replies. I upgraded Asterisk to git as of yesterday (309dd2a), and I'm still having the same issues. In the trace below, I'm sending a fax from Hylafax server through iaxmodem on Asterisk-13 (tiare) to a second Asterisk (11.18.0 t0gw) connected to the PSTN via ISDN; the

I am having a problem with one of my callers who is using either g729 or alaw.  I can do alaw but not g729 so asterisk should negotiate alaw right?  In fact from the sip debug it looks like it does, but then I get the dreaded "channel.c:5630 set_format: Unable to find a codec translation path: (g729) -> (alaw)" and the call hangs up.  Why? Last minute thought: Is it possible that

As I understand it, delays like this are almost always caused by slow or failing DNS lookups. Running a packet capture on all interfaces filtering on port 53 shows no DNS traffic leaving the server. I have ensured that there is a DNS record for the server & that it can resolve it. I've also added records to my hosts file and checked using 'genet ahosts hostname' but still the issue

ping times are fine as well: [root at freepbx asterisk]# ping sipgate.de PING sipgate.de (217.10.79.9) 56(84) bytes of data. 64 bytes from sipgate.de (217.10.79.9): icmp_seq=1 ttl=57 time=46.7 ms 64 bytes from sipgate.de (217.10.79.9): icmp_seq=2 ttl=57 time=46.4 ms 64 bytes from sipgate.de (217.10.79.9): icmp_seq=3 ttl=57 time=46.7 ms 64 bytes from sipgate.de (217.10.79.9): icmp_seq=4 ttl=57

I am currently running Asterisk 13.1.0-1 I have a chan_sip configuration that works fine with a 3rd party. Third party does not use authentication or registration, it's ip based authentication... When I try switching to PJSIP.conf, I seeing 488 responses from the Asterisk side. What has me really baffled is the debugging indicates [Jul 14 17:28:24] DEBUG[3620] pjsip: sip_endpoint.c

Dan Cropp wrote: > I had my screenshots flipped. Is there a way to make sure the Contact field is NOT included in the ACK response to the OK (for the Answer)? > > PJSIP is including the Contact for the ACK response to the OK. > Contact:<sip:1234 at xxx.xxx.xx.xxx:5060> > There is no configuration option to configure this behavior. What is the full SIP signaling? -- Joshua

I am trying to make PJSIP work with my Cisco SPA504G phone. I have no problems making it work with the chan_sip driver. When I configure my phone, it indicates the contact was added -- Added contact 'sip:7001 at 192.168.9.142:5063' to AOR '7001' with expiration of 3600 seconds Phone shows green light for the line. I then attempt to dial extension 1 and Asterisk crashes.

hi, let me explain in detail, what i have configured and what is happening now: 1st router w724v (Deutsche Telekom AG): - port forwarding, everything to destination port 51000-55999 to device with ip 192.168.2.50 (interface of 2nd router) 2nd router Bintec RS353j): - configured NAT, everything to port 51000-55999 to device 192.168.3.99 (same ports) other direction is totally open. I

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Le 21/05/2015 00:16, Joshua Colp a ?crit : > If CCSS is needed then the only option is to use chan_sip. The > chan_pjsip module does not implement CCSS in any way. Is CCSS support planned for PJSIP? chan_sip is in "extended" state in asterisk-13, so chan_pjsip should be preferred for new installations, ri ght? Thanks, - --

I place a call into Asterisk (from SIP phone) and the To header does not have a tag. Asterisk then sends it's Trying response, still no tag in the To header. The phone then replies with OK, this time the To header includes a tag. Is there any way to retrieve this response To header (including the tag field) from the dial plan? I have tried the PJSIP-HEADER read of the To header, but it

Ludovic Gasc wrote: > 2015-05-21 17:59 GMT+02:00 Jean-Denis Girard <jd.girard at sysnux.pf > <mailto:jd.girard at sysnux.pf>>: > > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > Le 21/05/2015 00:16, Joshua Colp a ?crit : > > If CCSS is needed then the only option is to use chan_sip. The > > chan_pjsip module does not implement

Thank you for the speedy reply. My originate string is something like the following where xxxxx is really the sip provider's supplied IP address 1234567890 is really the phone number I am dialing PJSIP/outbound.vitelity.net/1234567890 In the chan_sip based solution, it's... SIP/outbound.vitelity.net/1234567890 Have a great day! Dan -----Original Message----- From:

Hay guys, got trouble with registration with cisco 7975 Here is the debug : <--- Received SIP request (576 bytes) from UDP:192.168.1.61:49533 ---> REGISTER sip:192.168.1.4 SIP/2.0 Via: SIP/2.0/UDP 192.168.1.61:5060;branch=z9hG4bK35076381 From: <sip:111 at 192.168.1.4>;tag=0c8525a68961001f44d503e2-d9359bd3 To: <sip:111 at 192.168.1.4> Call-ID: 0c8525a6-89610004-b972d038-5864c98e

Hello list, this is the communication between an Aastra 5000 PBX and Asterisk, where the Aastra makes a call to Asterisk. For some reason, Asterisk responds with 401-Unauthorized and I don't know why. Calls go well with Panasonic PBX, Avaya PBX, Alcatel-Lucent PBX but NOT with this Aastra. A1.A1.A1.A1 = IP-address Asterisk PBX AS.AS.AS.AS = IP-address Aastra PBX Aastra PBX makes a call

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi list, It looks like Call Completion Supplementary Services is not available for PJSIP channels, am I right? Is there another solution? Thanks, - -- Jean-Denis Girard SysNux Syst?mes Linux en Polyn?sie fran?aise http://www.sysnux.pf/ T?l: +689 40.50.10.40 / GSM: +689 87.79.75.27 -----BEGIN PGP SIGNATURE-----

Hi all, we are trying to move our servers from chan_sip to chan_pjsip. At this time no problems with phones, they all register fine and can place calls. But for a trunk we face problem and can't place calls despite the fact that registration is OK. What we get is: [2018-04-16 16:08:33] WARNING[18665]: res_pjsip_outbound_authenticator_digest.c:178

Ok, it didn't quite solve everything. There is one slight issue. When I answer the call on my cell phone, Asterisk sees it as answered. I can play audio, send dtmfs, etc and hear it on my phone. However, a short while later, Vitelity tears down that call and Asterisk is never notified about it. I tell Asterisk to hang up the call (via AMI) and it is removed from Asterisk. I gather the