similar to: Early media using ARI

Hi Dan, i would do something like this (it is not a copy of what we are doing but an example of how i would do it) Important here is the "--data" and "-H" Option as well as the "variables" section within the Body. I added the callerid function here as well as it is the sample in the asterisk wiki. curl -v -H "Content-Type: application/json" -u

Hi Dan, as far as PPI and PAI Header, we use the channel Vars in order to do that. In Latest Asterisk you can set Channel vars within the create command in the Body. Just set the PJSIP(add,PAI) as you would do it in Dialplan. https://blogs.asterisk.org/2020/07/22/ari-create-channel-with-variables/ BR Jöran On Fri, Aug 7, 2020 at 7:06 PM Dan Cropp <dan at amtelco.com> wrote: > An

Hi all, we have just upgraded from Asterisk 11 to Asterisk 16. After porting all the config to 16 we figured out some major load problems. the majority running of our Asterisk instances is still having Asterisk 11 so we can compare load handling on both versions. On the same hardware configuration we see load differences that Asterisk 16 takes four times the load as Asterisk 11 (on 11 we see

Hi All, We are using asterisk 16.5 and having an issue with the first re-invite after the call has been established. We can see the call gets up and you see in the logs the bridge type has changed and after that a re-invite is triggered. Is there any possibility to deactivate this kind of reInvite? We have some race conditions while have multiple asterisk in the call flow and the different

Hi, @josh, We are using AGI. It is a very simple perl script. If we need to move to FastAGI we most likely would port it to ARI instead. But I let you know. @john, we using Perl. To see if it is a problem with the perl i had put an "exit 0" just at the first lines so there is no logic done at the AGI. It's only the start up and return from AGI what produces the most of the load.

Hi all, So the scenario is: A -> Asterisk -> B after B send back 200 OK Asterisk is answering the call to A. Directly after the Answer Asterisk generates a ReInvite to A and the only difference between the 200 OK sdp and the reInvite sdp are the offered codecs which are forwarded from B to A. Here i do not understand why this could not be done in the 200OK to A? As far as i understood

Hi All, I hope someone can give me a hint. We try to reload the asterisk dialplan config using ansible command module. Using this we just trigger asterisk -rx "dialplan reload" Now we want ansibe to fail if there is something wrong in the dialplan. If we put a bad config in extensions.conf dialplan reload prints some warning in Asterisk console but the command "asterisk

Hi Dan, i did it wrong, sorry: curl -v -H "Content-Type: application/json" -u asterisk:asterisk -X POST " http://localhost:8088/ari/channels/newChannelId" <http://localhost:8088/ari/channels/1400609726.3/play?media=sound:hello-world> --data '{ "endpoint": "SIP/Alice", "variables": { "CALLERID(name)": "Alice" ,

I'm trying to transition from AMI to ARI. Running into a small hiccup when I try to create (originate a call) with the caller id name and number I can pass the Name and Number if the name has no spaces in it and it shows up in my PhonerLite application. curl -v -u asterisk:asterisk -X POST http://asterisk:astersk at localhost:8088/ari/channels/mycallerid.1?endpoint=PJSIP/1003 at

Hi Jöran, Would it be possible to see an example using curl of how you are passing the PAI Header through ARI create? Dan From: asterisk-users <asterisk-users-bounces at lists.digium.com> On Behalf Of Jöran Vinzens Sent: Friday, August 7, 2020 12:10 PM To: Asterisk Users Mailing List - Non-Commercial Discussion <asterisk-users at lists.digium.com> Subject: Re: [asterisk-users] With

Hi Gang To increase security against phished passwords and similar attacks, we consider offering customers to define IP ranges (or GeoIP locations) from which their dynamic registrations are being accepted. I can already look at the source IP in the dial plan, so no issue with validate an INVITE against a source IP. But I would also like to prevent registrations from outside of this

Jon, We are only using FastAgi. On the second system (running Asterisk 16) there are no agi's running (just some bash scripts on call hangup). I did add some hackey code (netstat -nua | grep -v 'udp 0 0' | grep -v udp6 | grep -v ' 0 0.0.0.0' | grep udp) to my bash script to check out the packet queue (with the help of

Hi, does anybody know about the setvar option in asterisk's sip.conf. I am trying to define it for a peer that's used when making calls using the originate ami call, but it seems to not have any effect. Marcus -- Marcus Hunger - hunger at sipgate.de Telefon: +49 (0)211-63 55 55-61 Telefax: +49 (0)211-63 55 55-22 indigo networks GmbH - Gladbacher Str. 74 - 40219 D?sseldorf HRB

Package: xen-system-amd64 Version: 4.17.1+2-gb773c48e36-1 Severity: important Dear Maintainer, after upgrading my bullseye server to bookworm I ran into the issue that all VMs of type hvm are not starting anymore. xl throws an error: libxl: error: libxl_qmp.c:1399:qmp_ev_fd_callback: Domain 8:error on QMP socket: Connection reset by peer libxl: error: libxl_qmp.c:1438:qmp_ev_fd_callback: Domain

Hello i am trying to setup sipgate gateway i can get incoming calls fine, but when i dial in and then try to dial out i get this in asterisk command line -- Called 01179248615 at sipgate [Sep 18 13:58:30] NOTICE[28232]: chan_sip.c:17885 handle_response_invite: Failed to authenticate on INVITE to '"01179553708" <sip:SIP-ID at sipgate.co.uk>;tag=as30eb9dd1' --

I'm trying to setup sipgate on 1.6.1. Following the instructions on the site: http://www.sipgate.com/faq/article/394/How_do_I_configure_Asterisk, I created [sipgate] in sip.conf and a [sipgate-in] in extensions.conf: [sipgate] type=friend secret= ;;SIP_PASSWORD insecure=port,invite defaultuser= ;; SIP-ID fromuser= ;;SIP-ID context=sipgate_in fromdomain=sipgate.com host=sipgate.com

hi, let me explain in detail, what i have configured and what is happening now: 1st router w724v (Deutsche Telekom AG): - port forwarding, everything to destination port 51000-55999 to device with ip 192.168.2.50 (interface of 2nd router) 2nd router Bintec RS353j): - configured NAT, everything to port 51000-55999 to device 192.168.3.99 (same ports) other direction is totally open. I

I'm trying to connect a sip call from sipgate to Asterisk A to Asterisk B. Both are behind NAT, but port forwarded. I get the connection, but no voice - either in or out. I can call on SIP from A to B (and from B to A). Do it all the time. Asterisk A receives SIP calls from Junction and Teliax. CLI on A looks right: == Using SIP RTP TOS bits 184 == Using SIP RTP CoS mark 5 ==

Hi, have some problem with incoming calls from sipgate. This was working in 1.4 but in 1.6 I get a 401 Unauthorized :-(. Sipgate has mentioned that I have to change the type to friend, but it is already friend, so what's wrong? Kind regards, Michael Here is the sip.conf: [sipgate_out] type=friend nat=yes username=1234567 fromuser=1234567 fromdomain=sipgate.de secret=secret host=sipgate.de

Hello, I've been looking at the DialPlans by some poeple using Asterisk with SipGate, but the new Asterisk@home 1.0 allows you to create Outbound routes etc, does using the web admin give the same effects? When I add a SIP Trunk with my Sipgate settings and use a pattern of "8|." to place all calls with a 8 prefix tot he sipgate account the softphones dial the number, the Asterisk