similar to: chan_pjsip: DTMF mode "auto_info" on endpoints

I have many endpoints and each endpoint has some parameter in common so i wonder is there any way to config one for all endpoints? Like in my example I have two endpoints and I repeat the same thing, [100] type=endpoint aors=100 auth=100-auth allow=ulaw,alaw,gsm,g726 context=from-internal callerid=device <100> dtmf_mode=rfc4733 use_avpf=no ice_support=no

Hello, I am looking for documentation support for enabling instant messaging between endpoints using Asterisk 13.1.0 and vanilla VoIP clients such as Zoiper. Where do I enable this support on the server side and does it need anything on the client side? I see plenty of online help for chan_sip, but nothing for chan_pjsip. I imagine there is both pjsip.conf configuration and extensions.conf

I tried to download Digium’s Opus Codec via the following link, but the server is unavailable: http://downloads.digium.com/pub/telephony/codec_opus/ It took me a while to figure this out, because initially I tried downloading via selecting the Opus codec in make menuselect and realizing that it isn’t there after make install step. Can someone from Digium/Sangoma please confirm? FLORIAN

Ok Dan, try this... I was able to get this to work behind a NAT and with ip address authentication. [global] type = global debug = yes [transport1] type = transport bind = 0.0.0.0 protocol = udp *local_net=<yourlocalnet I.E. 10.10.10.10/24 <http://10.10.10.10/24>>external_media_address=<your public ip address>external_signaling_address=<your public address>*

So, the only thing that is needed in the endpoint definition in pjsip.conf (there is no such file pjsip.endpoint_custom.conf) is *message_context=astsms* Is that correct? Anything I need to do in extensions.conf? I see that the messages are received at Asterisk (when I turn on pjsip set logger on) but they are not delivered to the other endpoint. What gives? Any help appreciated. Thanks! On

I have the following configuration... [aor3] type = aor max_contacts = 1 remove_existing = yes [auth3] type = auth username = 1004 password = SuperSecretProbation [1004] type = endpoint context = IS transport = transport1 auth = auth3 aors = aor3 accountcode = 3 dtmf_mode = rfc4733 device_state_busy_at = 2 force_rport = no moh_passthrough = yes disallow = all allow = ulaw acl = acl1 When a

Please open a Ticket (https://issues.asterisk.org), to let them know that they need to update the documentation in Wiki and also handle this situation when using Alembic in Debian 9 (could happens in other Distros too). Marcelo H. Terres <mhterres at gmail.com> IM: mhterres at jabber.mundoopensource.com.br https://www.mundoopensource.com.br https://twitter.com/mhterres

Dear Asterisk community! I am having trouble with a project concerning the 183 Session Progress SIP messages. Asterisk seems to only accept these when there is also a Session Description (SDP) included in the message. I also verified this by looking at the code. However for a project we are working with a trunk to a third party system (Alcatel) and they are insisting that this behavior is

Hi! I just tried setting up Asterisk realtime database following the wiki article https://wiki.asterisk.org/wiki/display/AST/Setting+up+PJSIP+Realtime on a Debian 9 machine (which switched from MyQSL to MariaDB). One has to install mariadb-plugin-connect, python-mysqldb and alembic packages (alembic does not work when installed via pip). Additionally - since MariaDB by default does not have a

All, I'm using asterisk 16.4.0 with h264 and opus quite well using linphone 4.1 client on android and baresip on linux. I'm exploring use of h265 for improved video quality/lower network bandwidth. I do not see pass through support on asterisk for h265/hvec. All my SIP clients and underlying hardware have hvec/h265 encoding and decoding available. I would have liked vp9 however, vp9

Hi Benjamin! You're obviously using a similar scenario that I have in place for testing. I initially had issues with early media (not only video also audio) as well in that scenario. What I had to do was to additionally set external_media_address=<your external IP> in pjsip.conf Also, as I wrote the patch for early-media video I'd be interested in any feedback from it. ? ? With

Hi there! Is there any way I can turn on debug for ARI and sending the output to a separate log file? So far I have only been able to turn on ARI debugging in the console which results in the debug output being logged in /var/log/asterisk/messages I would love to have ARI debug log messages in /var/log/asterisk/debug or even better in it's own ari-debug file. With best regards Florian

how if I use the auto generate once from freepbx ? On Tue, Sep 22, 2015 at 10:12 PM, Ishfaq Malik <ish at pack-net.co.uk> wrote: > > > On 22 September 2015 at 16:04, Thyda ENG <engthyda at gmail.com> wrote: > >> I have many endpoints and each endpoint has some parameter in common so i >> wonder is there any way to config one for all endpoints? Like in my

I just noticed, the calling device isn't even sending the early media video stream. It just sends an early media audio stream. Is there propably a change in the signaling needed? (On another P2P SIP Server the early media video works.) 2018-04-10 12:29 GMT+02:00 Benjamin Marty <benjamin.marty at gmail.com>: > Hi Florian > > I already have the external_media_address set in the

Hello, I've discovered homer-api-postgresql and homer-api-mysql packages in Stretch repo. I'm not sure I understand how Homer-API relates to Homer. My questions are: 1. What is the simplest available installation option to install Homer on a dedicated box, this dedicated box gathering data from one or several Asterisk systems on the same LAN ? 2. Is it possible to centralize data on a

Hi all I've got an issue where when I call a number that just plays early media back to me. Instead of hearing the full sequence of tones I hear a short ringing then part of the sequence. What seems odd is that I can see the telephone-event/8000 being passed up the chain but when it gets to Asterisk, it is never sent back to the phone. Instead I just see the usual RTP flows. I've been

On 12/07/2018 03:36 PM, Administrator TOOTAI wrote: > Le 07/12/2018 à 14:32, hw a écrit : > > [...] >> >> Queues seem to be the only way to have several phones ring at once, or >> are there other ways? > > Dial(SIP/Phone1&SIP/Phone2&...&SIP/Phonex,,) > Good to know, thanks! What are the entries needed in the queue_members table when using

I did a quick check between what I have set and your settings below. You can try the following and see if it helps In your endpoint: bind_rtp_to_media_address=yes With best regards Florian Floimair Innovation - Software-Development - VoIP & DevOps COMMEND INTERNATIONAL GMBH A-5020 Salzburg, Saalachstra?e 51 Tel: +43-662-85 62 25 Fax: +43-662-85 62 26 http://www.commend.com Security

Thanks again. How do you create that message context in extensions.conf? On Mon, Nov 16, 2015 at 9:44 PM, Thyda ENG <engthyda at gmail.com> wrote: > According to what I have done , I add the message_context to the > pjsip.endpoint_custom.conf in /etc/asterisk and then I create that > message_context in the extension.conf, and it works. > > On Tue, Nov 17, 2015 at 9:34 AM,

Well, that sounds pretty straight forward. I can do this and push it to gerrit. Do I need to create a ticket for this? With best regards Florian Floimair Innovation - Software-Development COMMEND INTERNATIONAL GMBH A-5020 Salzburg, Saalachstraße 51 http://www.commend.com <http://www.commend.com/> Security and Communication by Commend FN 178618z | LG Salzburg Am 22.08.19, 11:55