similar to: SRV with pjsip on Asterisk 15.5: yes or no?

Using pjsip 2.7.2 on Asterisk 15.5 Really struggling to make sense of translating these old 1.8 SIP instructions into a neat pjsip_wizard conf suitable for 2018 http://wiki.sip2sip.info/projects/sip2sip/wiki/SipDevicesAsterisk#Version-18 In pjsip_wizard.conf, I have the following, which seems to get me registered, and it responds to an incoming call, but I always get this: [Jul 28 18:32:29]

Would greatly appreciate any input into this currently-unanswered question on the forum: http://forums.asterisk.org/viewtopic.php?f=1&t=96496 I posted it on Jan 6th, have tried so many things, so much forum/list searching and late nights since, but have had to admit defeat. Rather than duplicate it all here, I've posted my logs and conf files on that thread, too. Problem is that while

Hi, I have to create scenario like following, I have 2 sip soft phone.I configured Asterisk server on local network, on Linux.With two soft-phone , local asterisk sever, i able to communicate.Now i have communicate with other network SIP client.For that i have opened account at @sip2sip.info, they provided me credentials.Then i registered one SIP phone to local Asterisk sever and another to

I'm trying to implement direct_media between multiple peers and an uplink provider, all of whom have direct_media=yes configures. For originating calls to the uplink provider direct_media=yes works like expected. SIP flows through asterisk, rtp doesn't SIP: enduser <-> SBC <-> asterisk 13 <-> uplink RTP: enduser <-> SBC <-----------------> uplink SBC

Hello, I cannot call my server over the internet with SIP anymore. Even when I do a maximum logging on my firewall, I don't see packets coming from outside. I've tried it from an ekiga.net account and an sip2sip.info account. What could be wrong? I would expect incoming traffic on port 5060 UDP... The account is "paul at vandervlis.nl". This should connect trought DNS to the

Hi, sometimes 'pjsip show registrations' shows registrations to the VOIP provider as Rejected. I have already added max_retries = 0 auth_rejection_permanent = no in pjsip_wizard.conf and still asterisk does not recover. I need asterisk to keep trying to register and to renew the registration without requiring manual intervention. How can I make asterisk do that?

Le 28/02/2020 à 23:43, hw a écrit : > On Thursday, February 27, 2020 3:03:47 PM CET hw wrote: >> Hi, >> >> sometimes 'pjsip show registrations' shows registrations to the VOIP >> provider as Rejected. I have already added >> >> >> max_retries = 0 >> auth_rejection_permanent = no >> >> >> in pjsip_wizard.conf and still

On Wed, Jun 21, 2023 at 05:19:11PM +0000, TTT wrote: > I am using Asterisk 20.3.0 with PJSIP. I have setup a trunk to my ISP > (Twilio) who requires outbound authentication. My pjsip.auth.conf contains: > > [Twilio] > type=auth > auth_type=userpass > password=mysecret > username=myun > > However, my calls using the trunk are rejected with a 403. Using pjsip >

I am having a one way audio issue with xlite clients behind NAT. They can connect to the server and make calls but no audio is heard on the other end. my sip conf [general] context=default bindport=5060 bindaddr=0.0.0.0 srvlookup=yes canreinvite=no[tomfmason] type=friend secret=secret callerid="Thomas Johnson" <XXXX> host=dynamic nat=yes canreinvite=no disallow=all allow=gsm

I didn't use pjsip_wizard, I'm kind of crafting this by hand as I learn. I actually have a plain asterisk, and a FreePBX, system to help me learn. I sometimes create something in FreePBX to see what it does to the config files. So that's how I modelled my pjsip.X.conf files If I issue the command "pjsip show endpoint Twilio" it does show that outbound_auth=Twilio Does

Hello, We have a sip trunk between our voip operator and our asterisk 1.6.2.9 We have no problem during voice communications. But we can not send any t38 fax via this gateway. We tried to trace the error made some tests.. There are 2 main tests we tried to do. As i learned their voip path is like .. we connect to session border controller..then it routes the call to a cisco media gateway if the

Dear all, I have enabled stun module and configured it in asterisk , but asterisk not using stun returned public ip address for any of the sip requests going out of my network. i have done settings as below res_stun_monitor.conf settings: [general] stunaddr = stun.ideasip.com stunrefresh = 30 stun show status Hostname Port Period Retries Status ExternAddr

On 16-08-16 17:45, George Joseph wrote: > > > On Tue, Aug 16, 2016 at 3:21 AM, Jonas Kellens > <jonas.kellens at telenet.be <mailto:jonas.kellens at telenet.be>> wrote: > > On 16-08-16 04:38, George Joseph wrote: >> >> >> On Mon, Aug 15, 2016 at 1:24 PM, Jonas Kellens >> <jonas.kellens at telenet.be <mailto:jonas.kellens at

I am using Asterisk 20.3.0 with PJSIP. I have setup a trunk to my ISP (Twilio) who requires outbound authentication. My pjsip.auth.conf contains: [Twilio] type=auth auth_type=userpass password=mysecret username=myun However, my calls using the trunk are rejected with a 403. Using pjsip logging I notice that the outgoing invite does not have an authentication line. Why is Asterisk not sending

On Wed, Feb 17, 2016 at 8:56 AM, Sonny Rajagopalan < sonny.rajagopalan at gmail.com> wrote: > I made some progress. The first thing I have realized is that it is my > Twilio configuration in pjsip_wizard.conf that was killing me. I have since > removed that entire file from /etc/asterisk and I am able to make > "from-internal" context calls (i.e., calls that do not

Yes, it is enabled on port 5060. I do receive a TCP ACK back from the server, so I know the TCP segment is received at the server hosting the Asterisk build. On Wed, Feb 17, 2016 at 8:36 AM, A J Stiles <asterisk_list at earthshod.co.uk> wrote: > On Wednesday 17 Feb 2016, Sonny Rajagopalan wrote: > > OK. Let me ask this. Is anything else necessary, except choosing TCP as > the

Does anyone have a better ENUM lookup handler than the built-in ENUMLOOKUP() function? The built-in function does not properly handle multiple return values such as: 8.9.9.3.2.8.8.6.6.8.1.e164.org has NAPTR record 200 10 "u" "E2U+SIP" "!^\\+1866(.*)$!sip:1866\\1 at tollfree.sip-happens.com!" . 8.9.9.3.2.8.8.6.6.8.1.e164.org has NAPTR record 200 10 "u"

I'm trying to switch from one call to another incoming call from PSTN. When I'm getting a "beep" I press flash but instead of swithing to the second call, I'm getting a dial tone. even if I press *0, I cannot connect to the second call. Anybody had this problem? Tx, Bogdan

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Le 21/05/2015 00:16, Joshua Colp a ?crit : > If CCSS is needed then the only option is to use chan_sip. The > chan_pjsip module does not implement CCSS in any way. Is CCSS support planned for PJSIP? chan_sip is in "extended" state in asterisk-13, so chan_pjsip should be preferred for new installations, ri ght? Thanks, - --

Ludovic Gasc wrote: > 2015-05-21 17:59 GMT+02:00 Jean-Denis Girard <jd.girard at sysnux.pf > <mailto:jd.girard at sysnux.pf>>: > > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > Le 21/05/2015 00:16, Joshua Colp a ?crit : > > If CCSS is needed then the only option is to use chan_sip. The > > chan_pjsip module does not implement