similar to: Answered time on channel

It seems that what ever I set in my answer handler does not show up in the hangup handler. In order to do billing I can't rely on the g option where the caller hangs up the call. Looks like I can either use h or a hangup handler along with the shared function. On Tue, Dec 26, 2017 at 4:40 PM, Eric Wieling <ewieling at nyigc.com> wrote: > Don't use an 'h' extension, use

Hi, I noticed that when dial terminates it does not return to the dialplan, and therefore can not execute any entry after Dial(). Is there any trick to overcome this limitation ? How I am supposed to handle the returned vales DIALEDTIME, ANSWEREDTIME if I can not execute anything after Dial()? I made a workaround with DeadAGI (below) but it is unreliable: if 2 calls end

Hi folks -- I have a FastAGI Perl script running, handling calls. It works great. At one point I have a Dial() command. If the called party hangs up, Dial() returns 0, and when I call my own recordCdr() function using the channel variables ANSWEREDTIME, DIALEDTIME and DIALSTATUS, everything is fine. However, if the called party picks up, and then the dialing party hangs up Dial() returns -1,

Hi All, Asterisk 1.4.12 CentOS 5 My ISP account includes nearly 500 minutes of VOIP calls per month but the service is expensive for unbundled minutes. So I'm trying to find a way to keep an accumulated total of calls made through that trunk so that I can automatically switch to a lower-cost provider when my bundled minutes are used. The plan is to store the accumulated time in AstDB and

Hi, I'm currently using a cheap SIP provider for outbound calls. I do have 6 channels to them. In their terms of service there is the following limit: The total duration of calls during one single day should not exceed 24 hours or we do have the right to terminate the contract...blah blah What is the best way to use this provider as long as we are below let's say 22h in a single day

I'm looking into the dialplan specifics: tleilax:~ # tleilax:~ # cat /etc/asterisk/extensions.conf [general] static=yes writeprotect=no [globals] CONSOLE=Console/dsp ; Console interface for demo TRUNK=DAHDI/r1 ; Trunk interface TRUNKX=DAHDI/r2 ; 2nd trunk interface TRUNKIAX=IAX2/ASTtest1:test at 10.10.10.16:4569 ; IAX trunk

Hi List, In one of my AGIs (using DeadAGI) I grab the answered time using: my $res = $agi->exec ("DIAL $dialstring"); my $answeredtime = $agi->get_variable ("ANSWEREDTIME"); However this information differs from what's written in the Master.csv file (which happens to be the correct value!) Any ideas why? I'm using asterisk 1.2.7.1 and the

I am trying to record calls on demand both inbound and outbound calls. I can record outbound calls just fine but not inbound calls or calls from an internally between extensions. I am using the latest asterisk 1.8.x certified version. On an outbound call I see: == Using SIP RTP CoS mark 5 -- Called SIP/ BVTrunk /7190000000 -- SIP/BVTrunk-00000163 is making progress passing it to

Hi, Several people have reported problems sending faxes from spandsp-0.0.1k to Canon FAX machines. A spandsp user had the same problem with another make of FAX machine, and traced the problem to a bug in the file t30.c of spandsp. Line 542 says s->t4.rx_file[0] where it should say s->t4.tx_file[0]. This fixes his problem, and I suspect it will also fix the Canon fax machine problem.

Hello list. We just upgraded to 1.6.1.11. We are using real time information stored on mysql databases. That is all running fine. Now, since we upgraded, some member don't get calls from queues. In CLI: "queue show" shows something like: 611 (Local/611 at agents) with penalty 20 (realtime) (*In use*) has taken no calls yet We use the extension 611 in different computers, in the

Good afternoon list. I am experiencing a problem with the CDR and callfiles. What is happening is this: When generating a call with a callfile, everything works perfectly, but the CDR is recorded in the table when they answer the call destination. The field disposition is being recorded correctly, but the duration field is marked with the ring time and billsec is marked with 0. This just happens

I think HANGUPCAUSE is channel agnostic. See: core show function HANGUPCAUSE Some thing like this IIRC: Set(my_cause=${HANGUPCAUSE(${CHANNEL(name)},tech)}) Remember the incoming leg of the call and the outgoing leg of the call are different channels. Make sure you are giving HANGUPCAUSE the correct channel. On 06/09/2018 02:01 PM, Khalil Khamlichi wrote: > It seems very weird to me

Hi All, Asterisk 1.4.12 on CentOS 5 I'm trying to increment an AstDB key with the length of the last outgoing call. Here's what I've got for "01" UK geographical numbers: exten => _01.,1,Dial(${UKGeographical}/${EXTEN},,g) exten => _01.,n,Log(NOTICE,Call to ${EXTEN} lasted ${DIALEDTIME}) exten => _01.,n,Set(CALLTIME=${DIALEDTIME}) exten =>

Greetings, Recently a performance regression in chan_sip was discovered in Asterisk 1.8. The regression is caused by chan_sip setting MASTER_CHANNEL(HASH(SIP_CAUSE,<chan name>)) after each response received on a channel. That feature has been made optional in the latest 1.8 SVN code, but is currently still enabled by default. After some internal discussion, we decided to consider disabling

Hi I have calls comming from a SIP-ATA-Box via Asterisk to PSTN Phones by outbound SIP. Now i want to detect DTMF-Tone Code coming from the called party to trigger a signal. Can this be done with asterisk? I read that the codec with DTMF detection are ulaw and alaw. But i couldn't find a command to detect dtmf's within a normal call. thanks and mani greetings Christian

Hi team, I am trying to find solution to hangup b-party call after 1 min with out disconnecting the call of a-party but following dial plan which is disconnect both the calls. Please suggest me the solution. [TB] exten => _X.,1,Wait(${INCOMING_WAIT}) exten =>_X.,2,Verbose(TB) exten =>_X.,3,Answer() exten => _X.,4,Set(mainLoop=0) exten =>

Hi, I have a problem with polarity reverse this my dahdi config [channels] context=default usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes relaxdtmf=yes rxgain=0.0 txgain=0.0 group=1 callgroup=1 pickupgroup=1

I'm simply trying to forward calls to users who have the call forwarding feature enabled (FWD Status and FWD Ph Number kept in the astDB). The problem is that I want users to be able to forward calls to numbers that they would normally be allowed to dial within their own context. (I don't want a local call only person forwarding to a long dist number, for example.) I'm able to

Hello All. I am trying to use RAGI the ruby agi framework with trixbox. I am having a problem with the dialout part. The RAGI framework creates a file in the /var/spool/asterisk/outgoing directory and routes the call to an extension (I have listed the relevent portion of the file below). The problem is that the initial dial command does not execute properly in trixbox. I am hoping somebody who

Hello Guys, I'm somewhat of a newbie and am desperately seeking for some help... I've managed to get asterisk up and running on my server, and signed up with a broadvoice account... I'm having no problem dialing and communicating between extensions, but whenever anyone tries to call my broadvoice account, they are greeted by no ring or anything, but rather simply a direct to