similar to: What could be stopping "Disconnect Call" feature from working (set in features.txt)

Thank you - that makes sense. I've seen something about swapping and optimizing channels on the console, but I didn't realise "optimize" meant "not do what you wanted". OK, so here's why I'm dialling anything at all: The first dial is because I MUST limit the incoming call to less than 60 minutes. The second dial, which carries the gH option, is because I

Last question for today, I promise! The problem: In order to disconnect calls after x minutes, I need to do this: [setup] exten => setup,1,Answer() same => n,Set(LIMIT_PLAYAUDIO_CALLER=yes) same => n,Set(LIMIT_WARNING_FILE=/var/lib/asterisk/sounds/en_GB_TNS/time_limit_reached) same => n,Dial(Local/s at root/n,3,L(3540000:60000)) same => n,Hangup() [root] exten

Hello, Limiting the call duration with the L-option of the Dial()-command is working fine, however the announcement is not played. Dialplan : exten => _367,n,Set(LIMIT_PLAYAUDIO_CALLER=yes) exten => _367,n,Dial(SIP/test6,,L(11000,5000,5000)) The call lasts for 11 seconds, but 5 minutes before time runs out an announcement should come. I hear no announcement, not on caller-side nor on

Greetings, I have tried numerous ways to set the LIMIT_PLAYAUDIO_CALLER and LIMIT_PLAYAUDIO_CALLEE variables with no success. The default parameters never change. Has anyone had success changing the defaults? If so, how did you do it? Thanks, vcomp -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello, I want to limit calls per sip account user. How may I realize this setting? For example I want to limit to 10 min all possible calls from an account or to limit external calls to 10 min and local call remain unlimited. Thank you for support guys. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi it's possible into Asterisk 1.6.x to limit a call at 120 mn ? after 120mn, hangup and the customer call a new time thanks olivier

Hi, Is there a way to limit the duration of a call in the Dial command? Mainly for perpay account. Thanks __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello everyone, I'm trying to find out a way to whisper the time remaining for a prepaid application on a established channel. Unfortunately I think there is a lack of PlayBack/Background commands which can be applied on a working channel as well as a lack of spy/whispering commands available via Asterisk Manager. Does anyone know how to implement this? Thanks a lot. Regards, Victor

Hi, I'm wondering if someone can share their thoughts on how to implement a system that periodically checks active channels which have been up for more than X minutes and plays/injects a sound file. The idea is to simply warn users that they've been on the phone for quite a while and maybe they should consider hanging up. If the call stays up for more than Y minutes, it is dropped

On Wed, Aug 8, 2018 at 1:53 PM, Daniel Journo <dan at keshercommunications.com> wrote: > > Prior to a call entering a Queue, I set __DYNAMIC_FEATURES=NewRecordApp. > > AgentA answers and is able to use that feature code. > > If AgentA performs an attended transfer of a call from a queue to > AgentB, the > > feature code no longer works. > > > > It only

Hi I have calls comming from a SIP-ATA-Box via Asterisk to PSTN Phones by outbound SIP. Now i want to detect DTMF-Tone Code coming from the called party to trigger a signal. Can this be done with asterisk? I read that the codec with DTMF detection are ulaw and alaw. But i couldn't find a command to detect dtmf's within a normal call. thanks and mani greetings Christian

Hi, I have compiled and installed app_prepaid module. But have problem when connect to postgres database. I guess so because after key in card number, it always play prepaid-no-aaa voice file. Anyone succeeded in configuring the app_prepaid for prepaid calling service for asterisk? Please help. Ps: where can I view the log file for this module. Thanks. Tom --------------

I have the following senerio. Call file calls 1st party. When connected give called party option to connect to second party. Issue Dial to second party. Caller answers and the two are bridged together. My issue is that 4 out of 5 calls fail to bridge the audio. Am I missing something or is there some kind of bug? Here is my test dialplan ;Dialer Base Code Files. ;Variables

Hi everybody, we use Asterisk to route all calls to a inbound phone number to a specific outbund mobile phone number, depending on time and date. I'd like to send a notification email to a specific email address, each time we receive a call. For this I used the tip of "dicko" here [1]. I'm a Asterisk newbie. Unfortunately it doesn't work. The System() command is not

Hi Daniel, Am 27.03.20 um 09:24 schrieb Administrator: > Hangup is h extension. your macro will never be executed. Solution: > > same = n,Dial(whatever) > same = n,[...]) > same = n,Hangup > > exten  = h,1,1,DumpChan() >  same = n,System(/home/asterisk/bash_test) I don't really understand your code… I think I don't have to edit the first part of the conf file

It seems that what ever I set in my answer handler does not show up in the hangup handler. In order to do billing I can't rely on the g option where the caller hangs up the call. Looks like I can either use h or a hangup handler along with the shared function. On Tue, Dec 26, 2017 at 4:40 PM, Eric Wieling <ewieling at nyigc.com> wrote: > Don't use an 'h' extension, use

Hi fellows.. I have 2 asterisk servers in which the following line exten => _09049.,111,SetVar(LIMIT_PLAYAUDIO_CALLER=YES) exten => _09049.,112,SetVar(LIMIT_WARNING_FILE=beep) exten => _09049.,113,Dial(${TYPE}${DESTINO}|30|L(30000:10000)) works OK on my Asterisk 1.2.9, it plays the beep 10 seconds before the end of the call. doesn't work on my Asterisk 1.2.13, it hungs 10

Hi, I'm very new to Asterisk and I have the following scenario. 1. Let's say I have a number of 1-222-222-2222 from my SIP service provider (VoicePulse). 2. I point my phone, Verizon wireless cellphone (1-111-111-1111), voicemail to the number provided by SIP service provider (1-222-222-2222). 3. I use another phone (1-333-333-333) to call 1-111-111-1111 and leave a voicemail message.

I am developing a new R package and am now checking it for submission to CRAN. The some functions in the package make use of the sparse matrix routines in the package 'Matrix'. When these are loaded in R, they create no problems. However, when running R CMD check, I run into the following error in executing the examples in a .rd file: > DD = Matrix(diag(1,200),sparse=TRUE) >

Hi, #make example data dat <- data.frame(matrix(rnorm(15),ncol=5)) colnames(dat) <- c("ab","cd","ef","gh","ij") If I want to get a subset of the data for the middle 3 columns, and I know the names of the start column and the end column, I can do this: mysub <- subset(dat,select=c(cd:gh)) If I wanted to do this just on the column names,