similar to: Asterisk inside network. What phone works well?

Hello, This is not technical post, just looking for suggestions on what to check.I have asterisk for long time, no updates, just maintain OS updates. I use SPA504G phones Very rarely and randomly when we pickup a phone - other side does not hear us. Call them back and all works. Now I have couple people I'm talking to and it seems like very call like this. Someone can't hear someone.

Hi All; I've downloaded the Cisco AnyConnect tar.gz file for one of our clients, when I untar it and then run the vpn_install script in the vpnclient directory I get the below error. Thanks in advance for any help... / //# ./vpn_install// //Cisco Systems VPN Client Version 4.8.02 (0030) Linux Installer// //Copyright (C) 1998-2006 Cisco Systems, Inc. All Rights Reserved.// // //By

Hi, We have a user who is putting large call volumes through Asterisk, and wants to BLF monitor up to 90 extensions. We are struggling to find a handset that can keep up with Asterisk :) 1) Is there a handset that will do this? 2) Is there a different (standard) way to send BLF and allow directed pickups? 2a) Or even a handset specific way? Asterisk handles the BLF volume fine, even on quite

I am trying to make PJSIP work with my Cisco SPA504G phone. I have no problems making it work with the chan_sip driver. When I configure my phone, it indicates the contact was added -- Added contact 'sip:7001 at 192.168.9.142:5063' to AOR '7001' with expiration of 3600 seconds Phone shows green light for the line. I then attempt to dial extension 1 and Asterisk crashes.

Hi, Is it working for anyone? I have tried with trustrpid=yes sendrpid=yes/pai but can not get it working, Asterisk cli shows prevented message like this. Connected line update to SIP/1231-00000200 prevented Regards, Zohair Raza -------------- next part -------------- An HTML attachment was scrubbed... URL:

I have the above installed on a couple of 64-bit systems, both CentOS 6 and CentOS 7, where the client works fine. Now, however, I have installed the 32-bit version of CentOS 6 on a netbook but I cannot get the Cisco website installer to recognize the computer/operating system, not even displaying any error message. Does anyone have the client running on a 32-bit system? I have been told it

Hi all, I have to install 25 IP Phone in some building. I want just basic IP Phones like: Cisco-Linksys SPA922 u$s 146 Grandstream GXP-2000 u$s 105 Snom 300 u$s 119 The most valuables parameters for me are (in importance order from high to low): - Stability (device don't hang in any way) - Voice quality using G729 - Provisioning So what device do

Hi all, I have Centos 7 which is doing great. I tried to install Cisco Anyconnect VPN client but could not launch it. It appear on my Application tab but not launching. Kindly assist me the a working rpm on Centos 7. Regards.

the AnyConnect vpn doesn't appear to be available on C8. Looked at rpmfusion and don't see it there either. anyone know when/if it might ever be? or where? thanks in advance! -- ---- Fred Smith -- fredex at fcshome.stoneham.ma.us ----------------------------- But God demonstrates his own love for us in this: While we were still sinners,

I imagine something like Cisco AnyConnect on Windows, where you can connect before login to the machine. So afterwards user specific network shares are available and can be connect via scripts. I have an openvpn server running. Regards Tim Am 1. Mai 2015 13:34:48 MESZ, schrieb Jim Perrin <jperrin at centos.org>: > > >On 04/30/2015 03:42 PM, Tim wrote: >> Hi all, >>

Hai Peter, Chipping in here. > > > Hi Rowland, > > You are right about firewall boxes. At least Cisco ASA is a terribly > (over) complicated device. People who are not Cisco pros should be > warned. Stay away, you will just waste your time, get frustrated, and > get sleepless nights. > > I don't blame the Cisco ASA here. In my case, I hadn't much

Hello, I am struggling to have a SPA504G to auto answer (for intercom/paging). I have tried the following SIP headers (not all together), but without luck: SIPAddHeader(Call-Info:\;answer-after=0); SIPAddHeader(Call-Info: answer-after=0); SIPAddHeader(Alert-Info: info=intercom); SIPAddHeader(Alert-Info: Ring Answer); SIPAddHeader(P-Auto-Answer: normal); Any other ideas? Leandro PS I have set

Subject: Teo En Ming's Learning Achievements on 14 August 2020 Friday [1] Activate Cisco AnyConnect SSL VPN License on Cisco ASA 5506-X Firewall Today I discovered that the base license for Cisco ASA 5506-X Firewall only allows maximum 2 SSL VPN users. I had to login to https://www.cisco.com/go/license, assign the PAK/token to the serial number of Cisco ASA 5506-X firewall and perform a

Hello, Please excuse my (probably newbie) question, but: Since RouterOS, MikroTik's proprietary OS, is largely based on GNU/Linux, anyone knows a way to run tinc on a MikroTik device? This would be in order to make an (imposed, no choice given...) MikroTik device (say the B1100AHX4 router) to participate in a tinc mesh, in interoperation with GNU/Linux machines. Please see:

[Off topic ?] Somebody can help me to convince some people to use Linux instead MikroTik ???? Happy new year. Andres.

Has anyone put together a list of basic modifications & recommended settings to optimize a TCP/IP (mostly wireless)network for VOIP? Specifically G.711 & IAX protocol, and the Vonage and Packet8 services. My network is mostly StarOS (which uses linux cbq and ipchains) and Mikrotik and I'd like to put in some tweaks to get VOIP working better. It is working just fine right now, with

I'm trying to implement call parking with asterisk and Cisco SPA504G phones: features.conf parkext => 700 parkpos => 701-702 context => parkedcalls I defined one of the unused keys to park the calls: Key2: fnc=sd;ext=700 at 10.0.1.103;vid=1;nme=Park I also defined two other keys to pickup/unpark the calls: Key3: fnc=blf+sd+cp;sub=701 at 10.0.1.103 Key4: fnc=blf+sd+cp;sub=702 at

Dear expeRts, This is a similar post as on R-SIG-MAC [I didn't receive an answer there; not sure if it was the right place to post either]. I'm running R version 2.12.1 (Platform: x86_64-apple-darwin9.8.0/x86_64 (64-bit)) on a MacBook Pro under Mac OS X 10.6.6. The following minimal example runs fine under this setup. However, if I am connected to a server via a VPN client [Cisco

We are using vpn routers to connect home users back to our office network. Basically, shipping a mikrotik router that 'calls home' and establishes a vpn connection for the pc and phone that are connected to the mikrotik... user plugs router in, plugs phone and computer into router, and that traffic is encapsulated back to our office... simple and straighforward. We would like to remove

Hi I am trying to setup a libreswan vpn between centos 7 and a Mikrotik router. I am try to get the keys working. My problem is the Mikrotik router wants the key in PEM format How do I export the keys generated with ipsec newhostkey into PEM format ? Thanks