similar to: Change Asterisk MulticastRTP codec

Hi everyone, I am sending out a multicast page using the following in my dialplan: Page(MulticastRTP/linksys/${MULTICAST_IP_ADDR}:6061/${MULTICAST_IP_ADDR}:6061,q) Everything works great, but I had a question about SIP and SDP: Should I be seeing a SIP/SDP message from the asterisk server containing media information and the multicast IP address? On wireshark, I see SIP/SDP from the admin

Hi all! Asterisk 13.1.0 Ubuntu 16.04, all latest. Can anybody explain this to me - I run Originate command from dialplan: same => n,Originate(Local/${number}@mycontext,app,ConfBridge,${confnum}) and I get crazy sound distortion in the conference, and I see that transcoding takes place here: NativeFormats: (slin192) WriteFormat: slin ReadFormat: slin192 WriteTranscode: Yes (slin

Again - when Originate is run from dialplan, i get: NativeFormats: (slin192) WriteFormat: slin ReadFormat: slin192 WriteTranscode: Yes (slin at 8000)->(slin at 192000) ReadTranscode: No When it's made with a call file (no matter how a call file is created), I see NativeFormats: (slin) WriteFormat: slin ReadFormat: slin WriteTranscode: No ReadTranscode: No Please

sorry for top-posting, the two topics started with 2 different reason subject, but then we finished on the same problem. btw,the 2 show channel are reported above: the channel with DTMF working kcenter*CLI> core show channel SIP/pbx2-000004b9 -- General -- Name: SIP/pbx2-000004b9 Type: SIP UniqueID: 1467323106.1275 Caller ID: xxxx Caller ID Name: xxxx

I am using a cyberdata "sip paging adapter" and with the Dial(MulticastRTP/basic/IP:port) and with tshark I see the RTP data, my device looks like its accepting the data and I hear a click for my relay on my device so it would seem its accepting the call, however - I hear no audio... Asterisk 11.11.0 is what I am using. What might be wrong here? Thanks, jerry -------------- next part

After an upgrade to Asterisk 12, I'm "collecting" channels. When I enter and then exit a conference room, I see: -- <CBAnn/207-0000067f;1> Playing 'confbridge-leave.slin' (language 'en') -- Channel CBAnn/207-0000067f;2 joined 'softmix' base-bridge <5edb1920-3774-4ba3-8c4d-23e8fd04519c> -- Channel CBAnn/207-0000067f;2 left

Hi all, For those of you people that use Agents (with Agentlogin, not AgentCallbackLogin) on a call center, I have this need: when the agent logs in, a channel keeps running all the time that the agent is logged in to receive the incoming calls. How do I know which agent logged in (code)? Right now, if I query the login channel, there is no information about which agent is logged on: #

Hi, how would i know what codec is being utilized? currently i have set allow=ilbc disallow=all. i unset all codecs on x-lite except ilbc. i tried to make a call and look at the channel i see these. does this mean it is using ulaw? how about writetranscode? does that mean there is no transcoding happening on the call? call is going thru, rtp is also going thru. what i would like to know is does

On Wed, 22 Nov 2017, Dmitriy Serov wrote: > ?same => n,System(printf "Action: Originate\nActionID: 1\nChannel: Local/${number}@mycontext\nApplication: Confbridge\nData: ${confnum}\n" > > /var/spool/asterisk/outgoing/${number}-${confnum}) I get: Unknown keyword 'Action' at line 1 of /var/spool/asterisk/outgoing/... Unknown keyword 'ActionID' at line 2 of

Hello, I am struggling to have a SPA504G to auto answer (for intercom/paging). I have tried the following SIP headers (not all together), but without luck: SIPAddHeader(Call-Info:\;answer-after=0); SIPAddHeader(Call-Info: answer-after=0); SIPAddHeader(Alert-Info: info=intercom); SIPAddHeader(Alert-Info: Ring Answer); SIPAddHeader(P-Auto-Answer: normal); Any other ideas? Leandro PS I have set

I have an asterisk 11.4.0 server with two interfaces, eth0 and eth1. Eth0 has a default gateway on it, eth1 is connected the subnet that has my phones registered. I'd like to use the multicastRTP driver to do paging. However, when a phone dials an extension with multicastRTP, the multicast stream goes to the primary interface (eth0) and it really needs to go to eth1. Is there a

this is the point, and the strange thing: DTMF is set to rfc2833, but is working both on incoming and outgoing calls, it is not working only on calls generated with the Originate AMI command, or with the queue member that point to Local dialplan, as you suggested 2016-06-30 22:53 GMT+02:00 John Kiniston <johnkiniston at gmail.com>: > Looking at your logs it looks like you may need to

I'm currently working with Asterisk 11.8.1 trying to get Multicast RTP working (it's not) with some Polycom phones, and I'm really trying to determine if Asterisk or the phones are the issue. I THINK it's Asterisk... In extensions.conf I have a simple: "Page(MulticastRTP/basic/x.x.x.x:xxxx) line, and when I dial that extension I get: -- Called

Hi: I am useing asterisk 11.12. I use G722 as preferred codec for my ip-phone. and my PSTN DAHDI use alaw. G722 is great when ip-phone talks to each other. but when ip-phone dialout to PSTN DAHDI, G722 is not great, since it is need to transcode to alaw. so I try to change the codec when dial from SIP to DAHDI. I tried to use IP_CODEC/SIP_CODEC_OUTBOUND at dialplan. but the SIP

I am using 11.17.0 - and MulticastRTP. Doesnt seem to work with polycom phones as other devices receive my multicast just fine. Is there something special to do to get multicast working with polycom phones? (other than enable multicast on the actual phone). Thanks Jerry -------------- next part -------------- An HTML attachment was scrubbed... URL:

I've lurked for a while, but I think this is one of my first "pleas" for help. I'm having issues where a parked call using the macro below is getting "stuck". Users park the call via a blfxfer key on an Aastra phone. If the call is a blind transfer, it tries to park the call. If it isn't a blind transfer, it tries to unpark the call. Only 2 extensions (2759 and

Hi! my asterisk-12.2.0 with pjsip-2.2.0 does not translate codecs any more. I tried every combination. silent on both sides. I compiled pjsip with no resample in pjsip. ./configure --prefix=/usr --enable-shared --disable-sound*--disable-resample* --disable-video --disable-opencore-amr is there a way to force asterisk back to do the codec translation? Attachment: sip show channel of the

Hi Group, actual i have a transcode problem and i have no idea to solve this. All my wav files are alaw encoded and i allow only alaw codec. But sometimes the WriteFormat is slin and if i recall the same number the WriteFormat is alaw for the Channel. Why the channel has sometimes slin and sometimes alaw? NativeFormats: 0x8 (alaw) WriteFormat: 0x40 (slin) ReadFormat: 0x8 (alaw) WriteTranscode:

Skipped content of type multipart/related-------------- next part -------------- A non-text attachment was scrubbed... Name: smime.p7s Type: application/x-pkcs7-signature Size: 2892 bytes Desc: not available Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20030403/46e84bf5/smime.bin

I am configuring a test Asterisk server (1.8.9.2) to practice setting a single codec globally, to avoid transcoding as much as possible. Since all of my recordings are in gsm format, I am trying to make the SIP clients use gsm everywhere. I am using Ekiga on Fedora 16 x86_64 for my tests. [root at elx2 asterisk]# cat /etc/asterisk/sip_general_additional.conf