similar to: Asterisk 13 chan_sip trunk appending @string to dialled number

David, I should also note; 246 is my extension, it has IP 172.22.3.238. 172.22.4.8 is the PBX, and 172.22.4.12 is the 2800 gateway. The trunk is called ?testing? at the moment. The route that selects this trunk uses a 9 prefix. This system is in semi-production, so there might be fluff in the log from other active calls. Brendan Ord OntheNet - Network Engineer P 07 5553 9222 F 07 5593 3557

Yes indeed. Do you have the dialplan, eg from /etc/asterisk/extensions.conf? Something is getting this OUT_3_SUFFIX variable and including it in a Dial to 172.22.4.12. On 18 August 2015 at 16:21, Brendan Ord <bord at staff.onthenet.com.au> wrote: > Starting to make sense when I saw this line: > > > > [2015-08-18 15:01:33] DEBUG[19366][C-00001cfc]: pbx.c:3785 >

Hello, So, I found this line under macro-dialout-trunk, in extensions_additional.conf (FreePBX, so it controls the conf files mostly); exten => s,n,Dial(${OUT_${DIAL_TRUNK}}/${OUTNUM}${OUT_${DIAL_TRUNK}_SUFFIX},${TRUNK_RING_TIMER},${DIAL_TRUNK_OPTIONS}) If I grep for OUT_3_SUFFIX in all files in /etc/asterisk I get nothing.. Here's a paste of a few things out of the two files that I

Thank you. I read that last yesterday afternoon, and I could've sworn I tried that but I will look into it again (I've tried so many different things it was getting cloudy what I've tried and what worked etc, combined that the extension config gets messed up after playing with it so much so I'm often recreating it as well). I also found a bug report in the FreePBX bug tracker

I?ve gotten to the bottom of this; Seems that the pjsip.endpoint_custom.conf isn?t getting included properly, or my syntax is wrong. If I put force_rport=no into pjsip.endpoint.conf and reload only Asterisk, everything works perfectly. Unfortunately, I?m using FreePBX, so it owns this file and my changes won?t persist a FreePBX reload. Brendan Ord OntheNet - Network Engineer P 07 5553 9222 F

Hi list, I've been googling this issue and found some good resources however I am still running into problems with the following combo ... Here's my story; - Asterisk 13.4 with FreePBX 12. - Migrating from Asterisk 11 / FreePBX 2.11 - Mix of Cisco 79xx handsets, mostly 7940G's. My problems started with (the very common) issue of the 7940 not replying to 401

Only slightly asterisk related I suppose, but hoping someone has attempted this... I have an old installation with a bunch of IP501s, and one died. I replaced it with an IP450, and the user sorely misses his DND button. I hated those DND buttons anyway, as I couldn't control them centrally. I'd *like* to program one of his softkeys to send a *XX sequence to do DND on the

Kilburn Abrahams wrote: > Hi > > AU 1.5 core sounds are missing. > > ake[1]: Entering directory '/usr/src/asterisk/sounds' > --2016-04-01 07:59:09-- > http://downloads.asterisk.org/pub/telephony/sounds/releases/asterisk-core-sounds-en_AU-alaw-1.5.tar.gz > Resolving downloads.asterisk.org... 76.164.171.238, 2001:470:e0d4::ee > Connecting to

Gentleman, Moderators, i don't know if this topic if OFF-Topic, if yes, please tell me. I had some difficult looking for a Asterisk software that provide me some functions (For exemple: CDR, Queue control, MeetMe Control) all-in-one. So i decided to develop than. In a few weeks i'll deploy a Beta version of this software and i'd like to know if is somebody available to try this

Hi everyone. We regularly get customers complaining about call quality issues. Most of the time it turns out to be their own broadband. Very occasionally server load. Does anyone have any advice or links to advice on measuring call quality? I?ve been playing around with ?sip show channelstats? but can?t other than measuring the packet loss I don?t really know what I?m supposed to be looking for

Hello, Sorry for a bit of a newbie post but we all had to start somewhere right .. I'm wondering if someone can briefly explain the difference between blind and attended transfers and why they would generate two very different CDR entries.? From my own research, it seems that transfers are both ultimately a SIP REFER and thus seeing two different CDR entries just confuses me further.

https://bugzilla.samba.org/show_bug.cgi?id=4220 Summary: --backup causes "stat" failed message when trying to delete a directory Product: rsync Version: 2.6.0 Platform: x86 OS/Version: Mac OS X Status: NEW Severity: critical Priority: P3 Component: core AssignedTo:

Hi, Recently i have worked on re-writing beryl's transparent cube, and ported 3d plugin to compiz. I'm attaching a patchset here that includes the transparent cube patches (i'll post the 3d plugin when i fix some problems that didn't happen in beryl). Patching order: btf-ftb.patch, clip-planes.patch, plugin-events.patch, cube-paint-order.patch, transparent-cube.patch. Special

Dear colleagues, I have the following code. This code is to 'filter' the data set. It works on the data frame 'whole' with four numeric columns: a,b,d, and c. Every row in the data frame is considered as a point in 3-D space. Variables a,b, and d are the point's coordinates, and c is its value. This code looks at every point, builds a cube 'centered' at this

Currently, the cube plugin uses mipmapping only when cube is unfolded. When the cube is rotated, mipmaps are not used, which leads to ugly look of textures. The attached patch fixes this. This leads to another kind of artifacts, which are fixable with anisotropic filtering. http://team.pld-linux.org/~wolf/aniso.png The leftmost image is the current state of cube plugin. The center image is with

I was just thinking, with the metadata files allowing us to make up settings pages, there is a problem that we could address here. It seems ever-so-evident that developers are splitting up plugins into much smaller plugins to reduce the amount of bloat. This is good because it speeds things up but bad for the user in two ways -We've got multiple settings pages which really adress the same

The dependency checking currently provided is clearly not good enough. There's currently two issues with the plugins that exist in the compiz repository. plane plugin conflicts with cube and rotate plugin, zoom plugin should probably work with either cube or plane but currently only loads when cube plugin is used. Adding a { CompPluginRuleBefore, "cube" } to the plane plugin and a

I know this has probably been asked before, but, I'll ask anyways: Workspaces/Desktops/whatever on the top and bottom of the cube, is there any chance this will ever happen? I love how in gnome you can have work spaces in rows/columns, and i tend to have 4-6 workspaces (well 6, but only 4 gets used all of the time, but its nice to have the "buffer" workspaces. since using compiz

First, I would like to compliment you all for a great work you put in developing compiz. I have it running for more that a month and it did not crash. Stability is very good. Great work! Today I updated compiz from git tree and found that rotate generates this error: compiz (core) - Error: Couldn't activate plugin 'rotate' Rotate does not function. Any ideas ? I run gconf

Hello, am I the only one experiencing some bugs with the latest git checkout in the gnome switcher and gnome window list ? When I click on one of the workspaces on gnome's switcher the cube doesn't rotate, but the windows disappear. I don't know how to describe it well, but it seems like the 4 faces of the cube in compiz and my 4 workspaces on gnome-switcher are now totally unrelated