similar to: Problem "no voice"

Hiya, I sent this bugfix to the asterisk-dev mailing list, and modified it as I noticed side effects, but now it appears to be finished. Nobody seemed to notice it there, so I thought I'd post here, as it seems to be something that will be needed as people update to the latest CVS version. So...read on :) Ted programmer_ted@hotmail.com P.S. Read to the very end. The original bugfix

Hi, I have just signed up with Voxee.com and have attached my Asterisk server to dial them via IAX2. Below is the start of the log which dials the number and promply hangs up when the call is answered, with the logs saying that the channel is not compatiable. I have traced this down to the g.729 codec which I don't have installed. Any ideas on how to force that the codec not be used?

Hi list! My problem: I have three extensions in my Asterisk 1.8.30.0 and they have a voicemail. On two of these numbers the voicemail works without any problem, on the other it doesn't... I get this error: [Oct 17 17:01:29] WARNING[14700]: channel.c:5254 set_format: Unable to find a codec translation path from 0x100 (g729) to 0x2 (gsm) [Oct 17 17:01:29] WARNING[14700]: file.c:957

Hi i am trying to do the same thing: receive a call from a cisco callmanager and forward it to a SIP user. Asterisk is compiled with h323 support, and is configured as a gateway in the cisco callmanager. h323.conf: [general] port = 1720 bindaddr = 193.x.x.x ; this SHALL contain a single, valid IP address for this machine allow=all extension.conf: exten = 3298,1,Answer exten =

Hi All, I have Asterisk 1.2.9.1 sending SIP calls to a Cisco 2620XM Router with a PRI card in it, handing off to a PBX and vise verse. Calls in and out are working fine except for DTMF from Asterisk to the 2600. DTMF from the 2600 to Asterisk is fine. Here are the Asterisk console warnings I get when I send DTMF from Asterisk to the 2600: == Forcing Marker bit, because SSRC has changed Jun

We are getting the following on 1.8.3 and 1.8.4-rc2, HELP! Why is Asterisk unable to transcode to/from ulaw and g722? [2011-04-21 09:51:34] WARNING[22067]: chan_sip.c:6064 sip_write: Asked to transmit frame type ulaw, while native formats is 0x1000 (g722) read/write = 0x1000 (g722)/0x1000 (g722) [2011-04-21 09:51:34] WARNING[22067]: chan_sip.c:6064 sip_write: Asked to transmit frame type ulaw,

Hi Guys, I have a the following issue when I ma trying to place a call through my voip provider, I am using an asterisk 1.2.21.1, do you have an idea what could fix this issue (as you can see when the other party answered, the call get dropped because of probably sip incompatibility) Nov 12 14:31:30 WARNING[21432]: chan_sip.c:2587 sip_write: Asked to transmit frame type 256, while native formats

With asterisk 1.8.7.0 has been running ok for months. Now, this morning, it's crashing. I can restart it, but it crashes after 10+ minutes. It dies like this -- Executing [s at macro-stdexten:2] Dial("SIP/teliax-00000019", "SIP/176,18,rtT") in new stack == Using UDPTL TOS bits 184 == Using UDPTL CoS mark 5 == Using SIP RTP TOS bits 184 == Using SIP RTP

Starting with Asterisk 13.1 we are seeing this WARNING messages a lot in our logs and console: WARNING[25164][C-0004865e]: chan_sip.c:7364 sip_write: Can't send 10 type frames with SIP write) We found that line in function "sip_write" inside "chan_sip.c". In our previous version (11.2.1) we did not see those messages being printed (same verbosity level). We compared

Hi all! Quite a mystery. The following happened when I was on holiday, and no one else has changed any configs of either Asterisk or the Cisco's in the building... The situation: Incoming works fine on all phones. Outgoing only works from non-Cisco phones. When calling from a Cisco phone to an external phone, all the Cisco-user hears is a ticking crackle and after about a minute the phone

Good afternoon list. I'm experiencing a problem with my SIP channel's. When I have an external connection for one of my SIP carrier's, I can listen to the client and the client listens to me normally. The problem is when I will transfer this connection, the call is mute for the extension I have transfered. Only the client hears normally. In the console of Asterisk generates the

Hi everyone, I have an issue which is kind of a catch 22 situation. I had outgoing calls to my new PSTN provider working perfectly. Then I started focussing on incoming calls. It seems that I can solve an error which gets my incoming calls working but that in turns means my outgoing calls don't work. - Strange. Anyhow I was getting an error: Process_sdp: No compatible codecs! And from

Under 1.4.35 I get this message printed MANY times [May 3 21:41:21] WARNING[21567] chan_sip.c: Asked to transmit frame type 4, while native formats is 0x1000 (g722)(4096) read/write = 0x1000 (g722)(4096)/0x1000 (g722)(4096) [May 3 21:41:21] WARNING[21567] chan_sip.c: Asked to transmit frame type 4, while native formats is 0x1000 (g722)(4096) read/write = 0x1000 (g722)(4096)/0x1000

Good day! Have a weird problem with HT-286 and Conference room. I use Asterisk CVS-HEAD-06/04/04. Here it is: When HT-286 get into the conference room first and nobody in that room everything seems ok (with any codec HT286 allowed), but when HT-286 get into conference room when somebody already there, have got different HT behavior: 1. When HT use GSM codec => it connects to conference room,

I'm trying to pick up a ringing SIP phone (203) across the office with exten => *9,1,Pickup(783743) where 783743 is the local part of the number that our ISDN works on. I tried all of these first: exten => *9,1,Pickup(203) exten => *9,1,Pickup(SIP/203) exten => *9,1,Pickup(203@internal) and got a "declined" message back from my phone (snom 300), so I then

Hello, I've recently setup a small load test against an instance of Asterisks. I've tested on asterisk 13.5 and 14.6 with the same results. I am using PJSIP. My dial plan is, [test] exten => 1001,1,Answer exten => 1001,n,MusicOnHold(15) exten => 1001,n,Hangup I am using SIPP to test. I can share XML if desired but it simply waits on the line while music plays for 8

Hi Richard, Thank you for the reply Correct, I did mean 13.15. I set no optimize and better backtrace through "make menuselect" and the output is now [Aug 28 21:41:16] ERROR[17171][C-0000392d]: frame.c:343 ast_frdup: FRACK!, Failed assertion Excessive refcount 100000 reached on ao2 object 0x21962b0 (0) Got 26 backtrace records #0: [0x61923f] main/utils.c:2475

Hello, I need to be able to send a DTMF to an existing channel remotely. So I made a php script to do such with the Manager command PlayDTMF. I need it for example to start a transfer. isb177*CLI> features show Builtin Feature Default Current --------------- ------- ------- Pickup *8 *8 Blind Transfer # #8 Attended Transfer

Hello, I need to be able to send a DTMF to an existing channel remotely. So I made a php script to do such with the Manager command PlayDTMF. I need it for example to start a transfer. isb177*CLI> features show Builtin Feature Default Current --------------- ------- ------- Pickup *8 *8 Blind Transfer # #8 Attended Transfer

Hello, how are you? I need to be able to send a DTMF to an existing channel remotely. So I made a php script to do such with the Manager command PlayDTMF. I need it for example to start a transfer. isb177*CLI> features show Builtin Feature Default Current --------------- ------- ------- Pickup *8 *8 Blind Transfer # #8 Attended