similar to: DTMF issue

Hi Tom, Thank you for your informative and helpful reply. I had considered using the relaxdtmf setting but held off this due to not using any physical connection hardware -Asterik uses both SIP in and out from an upstream provider (Gradwell.com). Is it still possible to set this when using SIP trunks only and not physical hardware? The box does have a Digium ISDN card but the ISDN is no longer

Ah I see, in theory it's possible then. We don't have any IVRs or anything which requires key presses, there isn't even voicemail on this particular phone system so I don't think it will be too much of a problem. I've also updated the firmware on the Cisco phones that have had the issue, just to see if that solves the issue but as it's been going on for a while, I'm

Switched from Asterisk 1.8 to 13.3.2. Now it logs to /var/log/asterisk/full (good) as well as /var/log/messages (not good). Anyone know why? # grep -v "^;" logger.conf [general] [logfiles] console => notice,warning,error messages => error full => notice,warning,error,debug,verbose,dtmf,fax Thankfully, the .../full logs are rotating properly now (thanks Dale) but we don't

Hi, I'm having a problem with DTMF tones from my SIP client apparently crashing the chan_capi driver. However I'm not sure whether this is a bug or misconfiguration on my part: if I set "softdtmf=1" in /etc/asterisk/capi.conf the problem goes away. Does the AVM B1 not support DTMF detection? The set up I have is using latest CVS (3 days old) running RH8 on a 933MHz P3. SIP

Hi, I've managed to get X-Lite (v2 build 1050) working pretty well with *, but am having problems with the DTMF signalling. I've used inband signalling with no problems on the uncompressed codecs (G711), but obviously this doesn't work with the compressed ones (GSM). However when I try to use RFC 2833 it doesn't seem to pick up "0" properly. For example if I dial the

Hello, Talking with Soren Sratje about Caller ID in Brazil, we compare ours DTMF tones captured by ztmonitor. wcfxo correctly recognize the "DTMF CLIP" and asterisk shot the AST_STATE_PRERING correctly. But the DTMF tones are not reconized. In the chan_zap.c, the code: if (f->frametype == AST_FRAME_DTMF) { (...) Does not occurs because the frametype is always reconized as voice

Still grasping at straws trying to solve DTMF detection issues with one of my asterisk servers. This particular server is now running Asterisk 1.4.18.1 and Zaptel 1.4.9.2 in runlevel 3 (console only) with 2 X100P cards. I have tried adjusting channel gains, turning call progress and relaxdtmf on and off, switching echo cancelers, just about everything that Google turns up and I can't

Dear list, maybe not really an Asterisk question, but... all my users dial in via PSTN (via SIP DIDs) and enter a target number via DTMF through my Asterisk 1.4. Out of about 150,000 calls per month I see on average about 1 call per month where an arbitrary caller enters the letter 'A' via DTMF. These callers use their mobile phones to dial in. I just reread the Wikipedia article on

I found this old post using a Google search for DTMF tones heard during an Asterisk call. The calling party does not hear them, only the called party. We are experiencing this sporadic DTMF "beep" followed by a momentary silence on a random number of our calls. This happens on trunk to SIP and SIP to SIP calls, so it's not PRI related. Since this thread is dated 2003, and the

Hi, I have connected a TDM400P to my asterisk, I have enabled DTMF CID, the data is arriving to the asterisk but asterisk isn't interpretating it: its my full log: 1. Mar 10 16:26:03] DEBUG[8715] dsp.c: dsp busy pattern set to 0,0 2. [Mar 10 16:26:03] VERBOSE[9274] logger.c: -- Starting simple switch on 'Zap/4-1' 3. [Mar 10 16:26:03] VERBOSE[9274]

Hello folks. I'm not sure if this is the right list for this question, but I'll start here. If I'm using a SIP provider and I have an entry in sip.conf that looks like: [8315551212] type => friend ... dtmfmode => inband ... When I pick up the phone, call someone through this provider, and press numeric digits to generate dtmf tones, who is actually generating the tones at the

Ok, commented out that line. It's still doing it. Reloaded dialplan. Please don't tell me I have to restart asterisk. Thomas M. Peters | Systems Administrator | tpeters at mcts.org Desk: 414.343.1720 | Helpdesk: x3400 or helpdesk at mcts.org >>> Tiago Geada <tiago.geada at gmail.com> 6/26/2015 12:07 PM >>> messages => error states to log error messages to

Hello list, I'm having DTMF-troubles with a Snom phone. I want to know if it's the Snom or Asterisk that makes the trouble. I'm playing a prompt, then make a choice for "2" : [Jan 5 17:06:38] VERBOSE[29172] file.c: [Jan 5 17:06:38] -- <SIP/test1-00000701> Playing '/var/lib/asterisk/sounds/vprompts/109001/prompt5040.slin' (language 'nl') [Jan

Hi, I am receiving DTMF without any reason after call establishment. The log as follows, and I suspect something related to directmedia, [May 17 00:33:35] VERBOSE[4238] app_dial.c: -- SIP/MyTrunk-000a4b49 is making progress passing it to SIP/MAN-000a4b48 [May 17 00:33:35] VERBOSE[4238] app_dial.c: -- SIP/MyTrunk-000a4b49 answered SIP/MAN-000a4b48 [May 17 00:33:35] DTMF[4238] channel.c:

-------------------------------------------------------------------------------------------- Originally posted at http://forums.digium.com/viewtopic.php?t=18045 -------------------------------------------------------------------------------------------- Hi! I'm trying to configure a DISA setup (Asterisk 1.4.11). Only, executing DISA seems to prevent any DTMF detection capability when using

We are having an issue where DTMF is not being sent out right away and the tone duration is inconsistent. For a test we send a '5', then a second later we send a '9', and then five seconds later we send a '5'. If you look at the logs below you can see the first '5' is played right away, then the '9' comes in and gets queued, but it doesn't start

Hello list, asterisk 1.4.30 2 situations in which call-limit should work, but it does not : [Jul 8 09:15:49] WARNING[11132]: app_queue.c:3272 try_calling: The device state of this queue member, test12, is still 'Not in Use' when it probably should not be! Please check UPGRADE.txt for correct configuration settings. In sip.conf I have : limitonpeer = yes In my realtime sip_buddies

Hello, Information: gcc -v: gcc version 4.3.3 (Debian 4.3.3-3) os: Debian/Testing Pulled latest release from asterisk site, compiled, installed it. I have a barebones configuration: $ ls -l asterisk extensions.conf modules.conf sip.conf users.conf voicemail.conf You can see them here: http://home.comcast.net/~jpiszcz/20090418/extensions.conf

I have Polycom ip-300 phones that worked yesterday but dont seem to work today (at least dtmf signalling once connected to the asterisk box) The current configuration is: [general] port = 5060 bindaddr = 0.0.0.0 context = test srvlookup = yes dtmf = inband allow = all dtmfmode=inband progressinband=no disallow=all allow=ulaw pedantic=no [202] type=user secret=xxxx context=test mailbox=202

Upgrading an ancient customer installation... was running 1.4.23.1 (Trixbox) with Zaptel 1.4.12.9 and a Sangoma A102D, which has been running fine for 5+ years. Customer getting anxious about hardware failure, so we built a new box and installed 1.8.24.0, Dahdi 2.7.0.1, and a new Sangoma A104D. The single active span is an RBS T1 B8ZS/ESF/E&M Wink. I tried to move one span over one