similar to: Signaling incoming call

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Guenther Boelter <gboelter at gmail.com> schrieb: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA256 > > On 05/31/2015 02:31 PM, Luca Bertoncello wrote: > > Hi list! > > > > Now all works as expected, at least in the simulation I did with > > AsteriskNOW. Hopefully it will work later, when Deutsche Telekom

Kevin Larsen <kevin.larsen at pioneerballoon.com> schrieb: > The phone you gave your wife is really old. Are you sure it supports SIP > OPTIONS? Can you make a call in or out to it? If you can, it is more > likely that it just doesn't support that and you can't use a qualify > statement. No, I'm not sure. And no, I can't make any call, right now... At least,

Darryl Moore <darryl at moores.ca> schrieb: > Ahh. Seen that before! That suggests to me that you don't have your > sip.conf records setup right. > > What's your sip.conf look like? Well, here what I wrote in my sip.conf: register => 00493511111111:MYSECRET at pbxluca/00493511111111 register => 00493512222222:MYSECRET at pbxfax/00493512222222 register =>

Hi list! I have a problem and I hope someone can help me... I configured an Asterisk on a VM to serve more accounts and act as a proxy to other SIP-providers. The first account running on my phone works without any problem. A second account, running on the phone of my wife, is always UNREACHABLE. I can just see in the log: [May 28 21:48:46] NOTICE[3646]: chan_sip.c:22933 sip_poke_noanswer: Peer

Hi! I have a Asterisk installation to manage my phones at home (provider is Deutsche Telekom). It works, but very often the voice is "broken"... Yesterday during a call it was very difficult to understand what my partner sayd... It can NOT be a problem of other downloads/uploads, since in that moment there were no ones... I already had the problem in the past, solved it enabling the

Am 23.06.2020 16:22, schrieb Marek Greško: > It seems your problems lie in something other. Most probably it is not > mtu problem. All my suspections are contradicted. If it is true you > have inter vlan voice quality problems, it is definitely something > different. Formerly I assumed you were trying only LTE vs LAN using > internet. I'm not sure what you mean with the last

Hi list! Finally I got my wife's phone working in my Asterisk. Unfortunately I have some problems, too... Current situation: - AsteriskNOW with 4 Accounts (00493511111111, 00493512222222, 00493513333333, 5678). This is "for test" and it will be replaced by "the real world", when I got my Asterisk to work... - A second Asterisk (Ubuntu-PBX) on another VM, logging in

I think your phone may be trying to register with the username '1234', while your sip configuration is expecting 'luca'. Can you try changing your phone registration credentials to use 'luca'? Can you give us a sip transcript when you try to place a call from it? On 15-05-28 05:09 PM, Luca Bertoncello wrote: > Darryl Moore <darryl at moores.ca> schrieb: >

On Sun, 31 May 2015, Luca Bertoncello wrote: > Now, it would be nice, if I can signaling on the phone which number will > be called, so that, for example, if I receive a call for +493511111111 I > get a message on the display or the phone ring with a particular tone, > and if I receive a call for +493512222222 the phone write something > other on the display or ring with

Would you mind repeating the test with canreinvite=no set for all you phones and mobile phones? What is your upload bitrate? Is it guaranteed? I would try also to test the PMTU: Try: ping -M do -s 2000 ${ip address of the sip server} You should receive icmp asking for lowering the packet size. The LTE phones could have lower MTU and thus overcome PMTU problem. Marek 2020-06-22 21:48

Steve Edwards <asterisk.org at sedwards.com> schrieb: > You can fiddle with the ring tone by phone specific configuration and > phone specific SIP headers (sipaddheader(Alert-Info: ...)). > > These seem relevant: > > http://www.voip-info.org/wiki/view/RTTTL+melodies+for+ST2030 (the > discussion looks relevant as well). > >

I'm evaluating using Polycom phones for our call center and I've set up my first phone (a SoundPoint 560) to give it a try. The phone is working and can successfully place and receive calls. But every minute, there's an error in the log file: chan_sip.c: Registration from '<sip:6193644850 at jtsd05>' failed for '192.168.200.99' - Username/auth name

On 11.9, trying to set up a callcentric peer: sip debug: > <--- SIP read from UDP:204.11.192.161:5060 ---> > INVITE sip:1777<myccid>@10.10.11.180:5060 SIP/2.0 > v: SIP/2.0/UDP 204.11.192.161:5060;branch=z9hG4bK-6104e46aaaaef4249814d16a2ffb990d > f: <sip:<calling number>@66.193.176.35>;tag=3606475083-968127 > t:

Greetings, I've noticed a problem that might originate from my Asterisk configuration, could use a hand in sorting it out. Problem is a 488 response from Asterisk whenever it gets RTP/SAVPF profile in the SDP. My current setup has Asterisk Kamailio realtime integration, and Kamailio uses dispatcher to route calls for Asterisk to handle. Now I have only one Asterisk, on the same machine as

Hey, guys I've been working on whether libvirt supports encrypted snapshots,Here are my versions of libvirt and qemu [root@xx ~]# libvirtd -V libvirtd (libvirt) 4.5.0 [root@xx ~]# qemu-img -V qemu-img version 2.12.0 (qemu-kvm-ev-2.12.0-33.1.el7_7.4) Copyright (c) 2003-2017 Fabrice Bellard and the QEMU Project developers 1. assign $MYSECRET to libvirt secret using the secret-define and

I have three Sipura 3000 FXO untis for incoming PSTN lines on a small pbx. There is an IVR to select the extension. The DTMF tones are not being sensed so the IVR does not work and incoming calls are not being answered. I have listed my sip.conf entries. Is there any solution to this? ;Sipura units [101] type=friend host=dynamic context=default secret=mysecret mailbox=101 dtmfmode=inband

Good day all I've tried my iax conf and I'm struggling.So I want to know If someone else got this working and if they can pleas send my their configs I have to asterisk server,in different tows,both offices connected wit a direct line so both servers are on the same network running SIP.Each town got different extension register to each sever.Town A=100+ town B=200+ How do I get town A

Hi, I'm trying to configure 2 parallel sip trunks between 2 boxes. However I seem to have the problem that when making a call from Box 2 to Box 1, it sometimes says authentication failed because it is using the username of the other trunk. Here's my configuration: Box 1: [dp-dp2] type=peer username=dp-dp2 secret=mysecret qualify=yes host=box.2.ip.address context=from-internal [e911-dp2]

Ishfaq Malik <ish at pack-net.co.uk> schrieb: Hi Ishfaq > Look into Busy Lamp Field/Presence > > Here's a starting point: > > http://www.asteriskdocs.org/en/3rd_Edition/asterisk-book-html-chunk/asterisk-DeviceStates-SECT-1.html Thanks a lot, but it does not seems to work... Here my configuration: sip.conf: [general] allowsubscribe=yes subscribecontext = default

Does anyone know if the E1 cards that digium sells work in India. Also are there any distributers for those cards in India. By E1 cards I mean E100P, TE410P or TE405P -- regards Vikram (http://www.vicramresearch.com)