similar to: Yealink t26 and T28 Panels

Hi! > > We have a strange a strange issue at a client they have 3 panels on their phone and every so > often the panels reboot themselves yet the phone stays on. > > We decided to replace the T26 for a T28 to see if it fixes the issue and still have the exact > same issue. > > Has anyone seen this before? > I frequently use the newer T48G and T46G phones with the EXP40

Hi, Sorry for an OT post but striking out a bit at the moment trying to get a response from Yealink R&D. Has anybody successfully managed to get a Yealink phone to work across Open-VPN when using tlsauth ? We really do hope that it is possible due to the benefits tlsauth offers against DoS. -- Thanks, Phil -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi Krzysztof, Sure, please see below. DAG.dump.() before and after, annotated with what I believe the DAG means. I've spent some time debugging the method but it's proving difficult to determine where the logic is misfiring. Disabling the entire combine causes a lot of failing x86-64 tests - I may have to learn an upstream vector ISA to make progress on this. Thank you >From your

So I've got a bit of a head scratcher. Wanted to get some insight. I've got a PBX running 12.3.0 We're a ULAW shop from end to end. But I've been playing with G722 just for fun. I've got a Yealink T46G on my desk, And my colleague, A Polycom IP650 (Same office). Basically, Whenever I make an outbound call to a destination to something not G722 ready, I get no

Hi, I am having issues running a new backend that I created for a new architecture. I suspect these errors may have something to do with how I have the string setup in LLVMTargetMachine() below? Also - It would be great if someone could point me to a document that describes some of these error messages? For example what does t26 ..t4 mean? Thanks in advance for taking your valuable time to help

Hello. I'm having problems at instruction selection with my back end with the following basic-block due to a vector add with immediate constant vector (obtained by vectorizing a simple C program doing vector sum map): vector.ph: ; preds = %vector.memcheck50 %.splatinsert = insertelement <8 x i64> undef, i64 %i.07.unr, i32 0

Hi, We have a user who is putting large call volumes through Asterisk, and wants to BLF monitor up to 90 extensions. We are struggling to find a handset that can keep up with Asterisk :) 1) Is there a handset that will do this? 2) Is there a different (standard) way to send BLF and allow directed pickups? 2a) Or even a handset specific way? Asterisk handles the BLF volume fine, even on quite

Hi, I would like to test the following COLP use case : Alice and Bob are both using a SIP phone registered on a Asterisk 10 server. Alice dials Bob's extension. While Bob's phone is ringing, Asterisk updates Alice phone screen with Bob's name, so that at a glance, Alice can check she dialed the correct number. Before diving into Asterisk documentation, I would be happy to be

Hello! Oh, wise ones, ponder with me over two of the surprises that populate the universe! I have a phone, that I sometimes cannot reach, connected via pjsip. It can call other extensions just fine, it can call out over a trunk to my cell, all is well, but getting a call? Forget it most of the time. Here is all the config relevant to that phone: [murftest12] type=aor qualify_frequency=1992

Greetings all, First time poster, Sorry if this has been answered here before. We recently replaced a failed 1.4x asterisk PBX at a customer location. Voicemail access was setup when the customer dialed *8, This worked in 1.4. Now, Running 1.6 (I know it's old I had to load it quickly, And that's what I got working first. It'll get upgraded to 1.8 soon). The strange part is *8 no

int %nlz10(uint %param.x) { %.t3 = shr uint %param.x, ubyte 1 ; <uint> [#uses=1] %.t4 = or uint %.t3, %param.x ; <uint> [#uses=2] %.t7 = shr uint %.t4, ubyte 2 ; <uint> [#uses=1] %.t8 = or uint %.t7, %.t4 ; <uint> [#uses=2] %.t11 = shr uint %.t8, ubyte 4 ; <uint> [#uses=1]

Hi all, We have our system hosted publicly and 4 phones are connected remotely at employee's home, and when they try to do a assisted transfer to one of the employee at the main office, the call is lost. For ex: person A calls person B, person B calls person C for assisted transfer, and as soon as person B hits transfer button again to transfer person A to C, the call is lost. But in the

Hi, Is there a kind of scope mechanism in the instruction lowering pattern language in order to control where instructions are inserted or how they are later reordered during the SelectionDiag linearization? I know the glue chain that stick instructions together. But such mechanism in not provided in instruction lowering pattern. I'm facing many situations where some patterns are lowered into

Hello list, I need to set Voice QoS and SIP QoS for YeaLink. The possible values are 0 ~ 63. With Grandstream I can fill in DiffServ 46, which is EF. That's what I want. With Snom I fill in 184, which corresponds to EF or DSCP 46 (according to their wiki) But what value do I want to fill in with this YeaLink ??? This is a conversion table :

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi List, I have come across the above handset a few times in the UK, They are quite cheap over here (~?80) Not the best handset in the world but works well enough. I have been asked to setup a central config server for a large collection of these handsets. I know they can do Auto provisioning via FTP/HTTP/TFTP I have got an example of the generic

On Thu, 11 Jan 2007, Schimmel, Mark wrote: > file://docs/LangRef.html#globalvars > > The section describing the definition of global vars discusses that you > can specify an alignment and can also specify a section. Could someone > provide an example that works in gccas in release 1.9 for both defining > which section the var is assigned to and defining the variables >

But isn't kinda silly that we transform to xor and then we transform it back. What is the advantage in doing so? Also, since we do that method, I now have to introduce setcc patterns for i1 values, instead of being able to just use logical pattern operators like not. -Dilan On Fri, Jul 21, 2017 at 11:00 AM Dilan Manatunga <manatunga at gmail.com> wrote: > For some reason I

Hello, We are toying with setting up a redundant data center for our hosted PBX product, and plan to use the OpenVPN feature of our Yealink phones for connectivity to each data center. The feature has been fantastic with the first data center, allowing us to bypass all SIP NAT issues entirely and allowing remote access to the phones' web interface without having to touch the customers'

file://docs/LangRef.html#globalvars The section describing the definition of global vars discusses that you can specify an alignment and can also specify a section. Could someone provide an example that works in gccas in release 1.9 for both defining which section the var is assigned to and defining the variables alignment? Also, is there another document that describes how you define sections

Hello all, After numerous issues with Snom phones (360/370/870) potentially looking to migrate too Yealink as their product range looks very promising indeed. Are any of you using them with Asterisk ? How do they perform ? Do you use mass deployment at all ? Would be very interested to hear from you. -- Thanks, Phil -------------- next part -------------- An HTML attachment was